Comtrend Corporation PG-9172PoE Manual de usuario

Page 1

Quick Install Guide

PG-9172PoE| Powerline Ethernet Adapter with PoE (Power over Ethernet)

Understanding the Powerline Adapter

How to Create a Basic (2 unit) G.hn Powerline Network

Purpose

Recommended

Primary Adapter

Second Adapter

•Connecting a single dedicated

Internet Device

PG-9172

•Bringing wireless to a remote location

PG-9172

PG-9171n

•Connecting a PoE Enabled Device

PG-9172

PG-9172PoE

*NOTE: A G.hn Powerline Network can consist of up to 16 G.hn Powerline Adapters total.

NOTE: The following steps show how to create or add onto a G.hn Powerline Network using a PG-9172PoE. (A

minimum of two G.hn Powerline Adapters are required to create a proper connection.)

If this is the first time you are setting up a G.hn Powerline Network please continue to Section B.

If you already have an established G.hn Powerline Network, and are adding an additional adapter please

skip to Section C.

Configuration Button*

(Enables Device Synchronization)

Connection Indicator

Network Indicator

Security Indicator

PoE Indicator

Displays Connection Strength

Displays Network Status

Connection is Secure When Lit

Power over Ethernet is Active

Ethernet Port

Press for 10 seconds for Factory Reset.

Page 2

Creating a New G.hn Network

1. Plug a PG-9172 or PG-9172PoE* unit into the power outlet closest to your Network Device (Modem, Router or

Access Point). For maximum performance, please plug the Powerline Adapter directly into the wall outlet. Do not

plug into a power strip or surge protector, as network performance could degrade significantly.

*NOTE: It is suggested that you use the PG-9172 as the primary connection (however, you can also use a PG-

9172PoE) to the Network Device.

2. Connect the PG-9172/PG-9172PoE to your Network Device with the provided Ethernet (RJ-45) cable. (Wait 10

seconds for the Network Indicator to light up GREEN, which indicates a good connection, a flashing GREEN

light indicates that the device has a good connection, and it is also sending data).

Network Device

(Modem, Router, or Access Point)

Ethernet Cable

Page 3

Adding your G.hn Adapter to an Existing G.hn Network

3. Plug the PG-9172PoE into the power outlet closest to the location you want to connect a PoE Enabled Device.

4. Connect the PG-9172PoE to the PoE Enabled Device with an Ethernet cable. The Network Indicators on the

front of both Powerline Adapters should light up GREEN representing a strong connection. The PoE Indicator on the

PG-9172PoE should light up GREEN if the PoE Enabled Device is receiving power from the Ethernet cable.

5. Press the “Config” Button for 3 seconds on the PG-9172PoE. Then on any already connected G.hn

Networked Device, press the “Config” Button for 3 seconds until you see the Security Indicator start flashing

GREEN on EACH of the Powerline Adapters you want to be “connected.” (The Security Indicator will light up

GREEN when securely connected AND the Connection Indicator on the front of the Powerline Adapter

should be solid GREEN when they are paired ~representing a strong connection).

6. Repeat steps 3 to 5 to add additional G.hn adapters/devices into the network.

Your device is now part of a G.hn Network!

Network Indicator

Connection Indicator

PoE Indicator

IP Camera (PoE Enabled Device)

Page 4

Troubleshooting

The following information should help you diagnose basic setup or installation problems.

1) CONNECTION LED is OFF: Try Plugging both Powerline Adapters that you’re attempting to pair into power

outlets that are within the same room; both Powerline Adapters should have an Ethernet cable connected to

their respective devices (E.g. PC, Router, Set Top Box, Camera, etc…). After 10 seconds (Approximately, until all

the LEDs of the device blink), the CONNECTION LED should light up GREEN. If not, press the “Config” button on

each for 2-5 seconds and let go.

2) NETWORK LED is OFF: If the NETWORK LED fails to light up, check that the LAN port of the Powerline Adapter is

connected firmly to the LAN port of the other device. To check the condition of the Ethernet cable, use another

cable to test the same connection.

3) SECURITY LED is OFF: Meaning the node is in a non-secure domain and there is no PASSWORD used for

authentication. Repeat steps 3 to 5 to setup a secure G.hn connection.

4) PoE LED is OFF: If the PoE LED fails to light up, check that the LAN port of the Powerline Adapter is connected

firmly to the LAN port of the PoE device. Also, the PoE capable device needs to support the 802.3af standard

and not other proprietary standards.

*If you have tried all of the above and are still experiencing problems, you can reset both devices (PG-9172 & PG-

9172PoE) to factory default by using a pin to push in the “Reset” button for 11 seconds (until all the LEDs of the

device blink).

FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage:

http://us.comtrend.com/products/public/product/home-networking/PG-9172PoE.html

For more information:

Facebook: https://facebook.com/Comtrend

Website: http://us.comtrend.com/

Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)

CONNECTION

NETWORK

SECURITY

PoE

Tabla de contenidos

Otros manuales de Adaptador de Comtrend Corporation

Comtrend Corporation

Comtrend Corporation GCA-6000 Manual de usuario

Comtrend Corporation

Comtrend Corporation GCA-6000 Manual de usuario

Comtrend Corporation

Comtrend Corporation GCA-7000 Manual de usuario

Comtrend Corporation

Comtrend Corporation Movistar Manual de usuario

Comtrend Corporation

Comtrend Corporation GCA-7000 Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 902 Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 9142s Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9182PT Manual de usuario

Comtrend Corporation

Comtrend Corporation WD-1030 Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 9141S Manual de usuario

Comtrend Corporation

Comtrend Corporation GCA-6000 Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9172 Manual de usuario

Comtrend Corporation

Comtrend Corporation Powerline PowerGrid DH-10P Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 902 Manual de instrucciones

Comtrend Corporation

Comtrend Corporation PG-9182A Manual de usuario

Comtrend Corporation

Comtrend Corporation WD-1030 Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 902 Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9172 Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9171n Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 9142s Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9172AC Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid-9141(s) Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9172PT Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9182S4 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario