Comtrend Corporation PG-9182A Manual de usuario

Version A1.0, Jan. 29, 2018

PG-9182AC

Powerline Ethernet WiFi Adapter

User Manual of web UI Management

Publication may be reproduced, transmitted, transcribed, stored in a retrieval system,

or translated into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the

prior written permission of this company

This company makes no representations or warranties, either expressed or implied,

with respect to the contents hereof and specifically disclaims any warranties,

merchantability or fitness for any particular purpose. Any software described in this

manual is sold or licensed "as is". Should the programs prove defective following their

purchase, the buyer (and not this company, its distributor, or its dealer) assumes the

entire cost of all necessary servicing, repair, and any incidental or consequential

damages resulting from any defect in the software. Further, this company reserves

the right to revise this publication and to make changes from time to time in the

contents thereof without obligation to notify any person of such revision or changes.

Preface

This manual provides information related to the installation and operation of this

device. The individual reading this manual is presumed to have a basic

understanding of telecommunications terminology and concepts.

If you find the product to be inoperable or malfunctioning, please contact technical

support for immediate service by email at INT-support@comtrend.com

For product update, new product release, manual revision, or software upgrades,

please visit our website at http://www.comtrend.com

contained herein is proprietary to Comtrend Corporation. No part of this document

may be translated, transcribed, reproduced, in any form, or by any means without

prior written consent of Comtrend Corporation.

This program is free software: you can redistribute it and/or modify it under the terms

of the GNU General Public License as published by the Free Software Foundation,

either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY

WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this

program. If not, see http://www.gnu.org/licenses/

NOTE: This document is subject to change without notice.

Protect Our Environment

This symbol indicates that when the equipment has reached the end of its

useful life, it must be taken to a recycling centre and processed separate

from domestic waste.

The cardboard box, the plastic contained in the packaging, and the parts

that make up this PLC can be recycled in accordance with regionally

established regulations. Never dispose of this electronic equipment along

with your household waste; you may be subject to penalties or sanctions

under the law. Instead, please be responsible and ask for disposal

instructions from your local government.

Save Our Environment

When this equipment has reached the end of its useful life, it must be taken to a

recycling centre and processed separately from domestic waste.

The cardboard box, the plastic in the packaging, and the parts that make up this

device can be recycled in accordance with regionally established regulations. Never

dispose of this electronic equipment along with your household waste.

You may be subject to penalties or sanctions under the law. Instead, ask for disposal

instructions from your municipal government.

Please be responsible and protect our environment.

CATALOG

CHAPTER 1: GENERAL INFORMATION ..........................................................................................4

1-1 SAFETY INFORMATION .....................................................................................................................4

1-2 SYSTEM REQUIREMENTS..................................................................................................................7

CHAPTER 2: SYSTEM AND NETWORK SETUP ..............................................................................8

2-1 CONNECTING TO POWER LINE ACCESS POINT BY WEB BROWSER....................................................8

2-2 CONNECTING TO WEB MANAGEMENT INTERFACE.........................................................................9

2-3 VIEW SYSTEM INFORMATION.........................................................................................................10

2-3 NETWORK SETTINGS......................................................................................................................12

2-4 STATION LIST..................................................................................................................................12

2-5 TIME SETTINGS...............................................................................................................................13

2-6ACCESS POLICY ..............................................................................................................................13

2-7ADMINISTRATION............................................................................................................................14

2-8 MONITOR ........................................................................................................................................15

2-9 LOGOUT ..........................................................................................................................................15

CHAPTER 3: WIRELESS CONFIGURATIONS...................................................................................16

3-1 2.4GWIRELESS SETTINGS .............................................................................................................16

3-2 2.4G SECURITY SETTINGS..............................................................................................................17

3-3 2.4GWPS SETTINGS ......................................................................................................................18

3-4 5GWIRELESS SETTINGS ................................................................................................................18

3-5 5GSECURITY SETTINGS ................................................................................................................19

3-6 5GWPS SETTINGS .........................................................................................................................20

CHAPTER 4: CLI COMMANDS FOR TR069 SETTINGS VIA TELNET...........................................21

nvram_get 2860 TR069InformInterval..............................................................................................21

The setup images used in this manual are for reference only.

The contents of these images may vary according to firmware

version. The official image contents are based on the newest

firmware version.

Chapter 1: General Information

1-1 Safety Information

In order to keep the safety of users and your properties, please follow the

following safety instructions:

1. This power line access point is designed for indoor use only; DO NOT place

this power line access point outdoor.

2. DO NOT put this power line access point at or near hot or humid places, like

kitchen or bathroom. Also, do not leave this power line access point in the car

under direct sunlight.

3. DO NOT pull any connected cable with force; disconnect it from the power line

access point first.

4. If you want to place this power line access point at high places or hang on the

wall, please make sure the power line access point is firmly secured. Falling from

high places would damage the power line access point and its accessories, and

warranty will be void.

5. There’s no user-serviceable part inside the access point. If you found that the

power line access point is not working properly, please contact your dealer of

purchase and ask for help. DO NOT disassemble the access point, warranty will

be void.

6. If the power line access point falls into water when it’s powered, DO NOT use

your hand to pick it up. Switch the electrical power off before you do anything, or

contact an experienced electrical technician for help.

WARNING

•Disconnect the PLC from the power source before servicing

•For indoor user only

•Do NOT open the casing

•Do NOT use near water

•Do NOT insert sharp objects into the adapter’s socket

•Socket maximum output is 15A

Power Specifications:

I/P：100-240Vac, 50/60Hz, 15A

O/P：100-240Vac, 50/60Hz, 15A

Federal Communications Commission (FCC) Statement

15.21

You are cautioned that changes or modifications not expressly approved by the part responsible

for compliance could void the user’s authority to operate the equipment.

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may cause undesired

operation of the device.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

2. This equipment complies with RF radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 20 cm between the radiator and your body.

ISED

Canadian Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to

the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause

undesired operation of the device.

Avis Canadien

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Caution: Exposure to Radio Frequency Radiation.

1. To comply with the Canadian RF exposure compliance requirements, this device

and its antenna must not be co-located or operating in conjunction with any other

antenna or transmitter.

2. To comply with RSS 102 RF exposure compliance requirements, a separation

distance of at least 20 cm must be maintained between the antenna of this device

and all persons.

Attention: exposition au rayonnement radiofréquence.

1. Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet

appareil et son antenne ne doivent pas être co-localisés ou fonctionnant en

conjonction avec une autre antenne ou transmetteur.

2. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une

distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de

cet appareil et toutes les personnes.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems.

La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation àl'intérieur afin de réduire

les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

For the frequency 5600-5650 MHz, no operation is permitted

Pour la fréquence 5600-5650 MHz, aucune opération est autorisée.

1-2 System Requirements

Computer or network devices with wired or wireless network

interface card.

Any connected devices must feature a network port.

Web browser (Microsoft Internet Explorer 4.0 or above, Google

Chrome web browser, Opera web browser, or Safari web

browser).

Chapter 2: System and Network Setup

2-1 Connecting to power line access point by

web browser

PG-9082 supports two kinds of management IP simultaneously.

(1) DHCP client, which gets dynamic IP address from

Modem/Broadband Router/Home Gateway.

(2) Static IP, 192.168.0.10 by default, which can be configurable in

web UI.

Before you can connect to the power line access point and start

configuration procedures, your computer must be able to get an IP

address automatically (dynamic IP address). PG-9082 gets dynamic IP

address from Modem/Broadband Router/Home Gateway that it is

connected to by default. However, the current IP info of PG-9082 would

be displayed at Modem/Broadcom Router/Home Gateway.

On other side, Static IP of PG-9082 can be accessed The default static

IP address of PG-9082 is 192.168.0.10, subnet mask 255.255.255.0.

Please use static IP address 291.68.0.100, subnet mask

255.255.255.0 for accessing web UI management.

2-2 Connecting to Web Management Interface

All functions and settings of WiFi AP of PG-9082 must be configured via

web management interface. Please start your web browser, and input

‘192.168.0.10’in address bar, then press ‘Enter’ key. The following

message should be shown:

Please input user name and password in the field respectively, default

user name is ‘root’, and default password is ‘12345’, then press ‘OK’

button, and you can see the web management interface of this access

point:

NOTE: If you can’t see the web management interface, and you’re being prompted

to input user name and password again, it means you didn’t input username and

password correctly. Please retype user name and password again. If you’re certain

about the user name and password you type are correct, please go to ‘4-2

Troubleshooting, to perform a factory reset or to set the password back to default

value.

Tabla de contenidos

Otros manuales de Adaptador de Comtrend Corporation

Comtrend Corporation

Comtrend Corporation PowerGrid 902 Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 902 Manual de instrucciones

Comtrend Corporation

Comtrend Corporation GCA-6000 Manual de usuario

Comtrend Corporation

Comtrend Corporation WD-1030 Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid-9141(s) Manual de usuario

Comtrend Corporation

Comtrend Corporation GCA-7000 Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 902 Manual de instrucciones

Comtrend Corporation

Comtrend Corporation GCA-7000 Manual de usuario

Comtrend Corporation

Comtrend Corporation GCA-6000 Manual de usuario

Comtrend Corporation

Comtrend Corporation Movistar Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9172AC Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 9141s-PoE Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid-9171n Manual de usuario

Comtrend Corporation

Comtrend Corporation Powerline PowerGrid DH-10P Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9171n Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 9141S Manual de usuario

Comtrend Corporation

Comtrend Corporation WD-1030 Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9172 Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 9020 Manual de instrucciones

Comtrend Corporation

Comtrend Corporation PG-9172PoE Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9182S4 Manual de usuario

Comtrend Corporation

Comtrend Corporation PG-9172PT Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid-9171n Manual de usuario

Comtrend Corporation

Comtrend Corporation PowerGrid 9142s Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario