CommScope FACT Manual de usuario

1

Contents 1 Routing 250µm with overtubing on BOTTOM TRAY

2 Routing 250µm with overtubing on TOP TRAY

3 Routing patch cords on BOTTOM TRAY (right side)

4 Routing patch cords on TOP TRAY (right side)

5 Routing patch-patch on BOTTOM TRAY (left side)

6 Routing patch-patch on TOP TRAY (left side)

1 Routing 250µm with overtubing

on BOTTOM TRAY

1.1 Remove plastic cover on splice island.

1.3 Guide overtubing into bend control. (Refer to cable

attachment guide)

1.4 Guide tubing through channel of the defined tray.

1.2 Open bend control cover and FACT back lid.

FACT Cable Routing

INSTALLATION INSTRUCTION

Splice/Patch: 250µm with overtubing and patch cords

Patch/Patch: Pigtail to pigtail

TC-1302-IP

Rev A, Apr 2017

www.commscope.com

1.5 Position the tube in the channel onto the splice island.

1.6 Carefully push the overtubing through the channel.

1.8 Route fibers into the splicing tray as shown and check all

fibers are routed under the containment lips.

1.7 Stop the overtubing at the position (straight area) shown

in the picture and guide fibers through the channel into the

splicing area.

2 Routing 250µm with overtubing

on TOP TRAY

2.2 Guide both overtubings correctly into the bend controls

as shown.

1.9 Close plastic cover and push until you hear a “click”.

2.3 Carefully close FACT back lid and bend control cover.

2.1 Repeat everything from point 1.3-1.9

3

3 Routing patch cords on BOTTOM TRAY

(Right Side)

2.4 Open drawer, top tray and covers.

3.3 Guide 3 patch cords on each bend control as shown in the

picture (SC connector type). For LC connector types, guide

6 patch cords on each bend control (not shown in picture).

3.4 Correctly guide patch cords through channel on patch island.

3.2 Install connector on bottom (position 12) and go to the top

(position 1).

3.1 Open bend control cover and FACT back lid.

4

3.5 Guide patch cords through channels of bottom tray.

4.2 Correctly guide overtubing into bend controls.

4.1 Repeat everything from point 3.2 till 3.6

3.6 Correctly guide patch cords through channel bend control.

4 Routing patch cords on TOP TRAY

(Right Side)

4.3 Carefully close FACT back lid and bend control cover.

4.4 Guide patch cord through trumpet.

5

5 Routing patch cords on BOTTOM TRAY

(Left Side)

5.1 Open bend control cover and FACT back lid.

5.3 Guide 3 patch cords in case of SC and 6 patch cords in case

of LC on each bend control as shown in the pictures.

5.4 Correctly guide patch cords through channel on patch island.

5.2 Install connector on bottom (position 12) and go to the top

(position 1).

6

5.5 Guide patch cords through channels of bottom tray. 6.2 Correctly guide over tubing into bend controls.

5.6 Correctly guide patch cords through channel bend control.

6 Routing patch cords on TOP TRAY

(Left Side)

6.1 Repeat everything from point 5.1 till 5.6

6.3 Carefully close FACT back lid and bend control cover.

6.4 Guide patch cord through trumpet.

7

© 2017 CommScope, Inc. All rights reserved.

All trademarks identiﬁed by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.

This document is for planning purposes only and is not intended to modify or supplement any speciﬁcations or warranties relating to

CommScope products or services.

This product is covered by one or more U.S. patents or their foreign equivalents. For patents, see:

www.commscope.com/ProductPatent/ProductPatent.aspx.

To ﬁnd out more about CommScope® products, visit us on the

web at www.commscope.com

For technical assistance, customer service, or to report any

missing/damaged parts, visit us at:

http://www.commscope.com/SupportCenter

Otros manuales para FACT

3

Otros manuales de Cables y conectores de CommScope

CommScope

CommScope LightCrimp Plus ST Manual de usuario

CommScope

CommScope SCIL-B Manual de usuario

CommScope

CommScope LC Manual de usuario

CommScope

CommScope FDH1204-24SE2 Manual de usuario

CommScope

CommScope FOSC 450 A Manual de usuario

CommScope

CommScope FOSC-400BG Manual de usuario

CommScope

CommScope HELIAX FiberFeed Manual de usuario

CommScope

CommScope FIST-RSKG-16 Manual de usuario

CommScope

CommScope AMP NETCONNECT MRJ21 1479452-1 Manual de usuario

CommScope

CommScope FOSC-OC-3 Manual de usuario

CommScope

CommScope OmniReach FTTX Manual de usuario

CommScope

CommScope AMP NETCONNECT SL Series Manual de usuario

CommScope

CommScope SYSTIMAX 360 iPatch 360-iP-G2-1U-LC-FX Manual de usuario

CommScope

CommScope BUDI-S Manual de usuario

CommScope

CommScope LightCrimp Plus SC Simplex Manual de usuario

CommScope

CommScope HELIAX FiberFeed FDH1210-24SE2 Series Hoja de instrucciones

CommScope

CommScope FOSC-350C Manual de usuario

CommScope

CommScope AMP NETCONNECT 1711357-1 Manual de usuario

CommScope

CommScope NOVUX Manual de usuario

CommScope

CommScope FD21206-48SRC Series Hoja de instrucciones

CommScope

CommScope TDUX-35 Manual de usuario

CommScope

CommScope ION-M7P Manual de usuario

CommScope

CommScope PICABOND 60944-6 Manual de usuario

CommScope

CommScope NOVUX SXT Manual de usuario

Manuales populares de Cables y conectores de otras marcas

Philips

Philips SWA6310 Manual de usuario

StarTech.com

StarTech.com CRJ4550PK Manual de usuario

Nohau

Nohau EMUL-IP2K-PC Manual de usuario

Foxun

Foxun SX-SP144E-HD4K2K Manual de usuario

Philips

Philips SWA3305W Manual de usuario

opticis

opticis Stretch DVIM1-1P0x Manual de usuario

Volkswagen

Volkswagen VAS 6558A Manual de usuario

NEXIBO

NEXIBO N-13 Manual de usuario

CYP

CYP PU-1H3HBTL Manual de usuario

Allen-Bradley

Allen-Bradley 1784-u2dhp Manual de usuario

Global Caché

Global Caché Flex Link Blaster Manual de usuario

Hauppauge

Hauppauge USB-Live2 Manual de usuario

Fenix

Fenix MPSV 15 Manual de usuario

BEGA

BEGA 71 085 Manual de usuario

Tesla

Tesla HPWC Manual de usuario

GAMERON

GAMERON LUXURY TV CABLE Manual de usuario

molex

molex Milli-Grid Dual row 87568 Series Manual de usuario

Burndy

Burndy Continental Industries thermOweld CRE-7 Manual de usuario