Commax WT-171LM Manual de usuario

WT-171LM / S

User Manual

•Thank you for purchasing COMMAX products.

•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

•The company is not responsible for any safety accidents caused by abnormal operation of the product.

1. Introdution....................................................................3

2. Important Safeguard....................................................4

3. Part names and features ............................................4

4. Wiring .........................................................................5

5. Registration / Deleting .................................................6

6. How to use ..................................................................7

7. Accessories ................................................................8

8. Specifications and Features .......................................8

Contents

Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the

unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided

below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.

Model No. Serial No.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

This symbol is intended to alert the use to the presence of uninsulated

“

“dangerous Voltage”

”

within the product’s enclose that

may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the

literature accompanying the appliance

1. Introduction

CAUTION : To reduce the risk of electric shock, do not remove cover(or back) no user-serviceable

part inside refer servicing to qualified service personnel

caution

Risk of electric shock

do not open

▲

Damage Requiring Service: This equipment from the power source and source and refer servicing to qualified service per-

sonnel under the following conditions:

ⓐwhen the power is damaged.

ⓑif liquid has been spilled or objects have fallen into the unit

ⓒif the equipment has been exposed to rain or water.

ⓓif the equipment has been dropped or otherwise damaged.

ⓔwhen the equipment exhibits a distinct change in performance- this indicates a need for service.

▲

Water and Moisture: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry

tub, in a wet basement, or near a swimming pool, and the like.

▲

Accessories: The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any

mounting of the manufacture’s instructions, and should use a mounting accessory recommended by the manu-

facturer.

▲

Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any

kind on the product.

▲

Lightning: For added protection for this product before a lightning storm, or when it is left un attached and un used for long

periods of time, unplug it from the wall outlt and disconnect the other system. This will prevent damage to the prod-

uct due to lightning and power-line surges. If you live in an area heavily prone to lightning storms, it is recom-

mended that you invest in power-line, telephone-line, RFcable and actuator/ polarization surge protectors to protect

your appliance system from possible damage

2. Important Safeguards

3. Part names and features

No. Features and setting

①Power switch

②Handset

③Call Button

④Handset cord

⑤Power plug

※Plug the AC cord into the outlet

4. Wiring

SCREW T4X18(2EA)

5. Registration / Deleting

A Registration

①When the power is turned on, the beep will sound.

②This product consists of the master(WT-171LM) and slave (WT-171LS) units.

③Turn on the master unit first and, within 30 seconds, press the call button for 5 seconds while

the handset is hung on its hook lever. Once it is entered into the registration mode, the beep

will sound.

The registration mode continues up to 60 seconds.

If you do the same for slave unit as you did for the master unit for registration after the mater

unit enters into registration mode, the registration mode entering sound will ring.

Once the slave unit is matched with master unit, the registration completion sound will ring.

Once the registration is completed, you can start communication by picking up the handset

and pushing the calling button.

④If you turn off and on the product after the registration is completed, the beep will sound.

※Paring completion sound : The sound that come out when the wireless communication is

ready

(When the paring is failed, the warning sound goes off from the slave unit only)

B Deleting

①To cancel the registration of master and slave, put down the handset within 30 seconds after

the power is turned on and click call button 3 times shortly and 5 times for long time (5 sec-

onds). Turn of the power after you hear the complete sound after the deleting (Same for

Master, Slave)

6. How to use

①Pick up one of the handsets of Master and Slave unit and press call button

②Bell rings when it is called(Ding Dong Dang)

③Pick up the handset to start the conversation.

④When the conversation is over, put down the handset.

⑤While you lift down the handset and push the call button more than 5 seconds, you can hear

the "Beep"sound. Now you are in the "adjust the bell sound mode".

In the "Adjust the bell sound mode", you can change the bell sound in order of "1-2-3-2-1"

when you push the call button.

⑥When the call button is clicked during the conversation, the communication volume will

changes in order of 1-2-3-2-1

7. Accessories

8. Specifications and Features

Model WT-171LM / S

Power Source 110~220V / 50~60HZ

Power WT-171LM : 2W

Consumption WT-171LS : 1W

Call Method GFSK

Ring tone Chime

Distance Indoor : 45~50M, outdoor : 200M

Temperature 0℃~ +40℃

Without Handset : 107x195x38mm

Including Handset : 107x195x51mm

※It is likely to be affected by surroundings. Call quality may be poor, if it is affected by Elevators,

high voltage, Radio Frequency Interference and iron doors.

Dimensions

Screws for wall mount : 2 Ea. Bracket & screw for powercord

Printed In Korea / 2014.04.105

PM53WT171M10

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea

Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133

Web site : www.commax.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Commax

Commax

Commax CIOT-L8TM Manual de usuario

Commax

Commax CDV-71AM Manual de usuario

Commax

Commax DP-2T Manual de usuario

Commax

Commax DRC-900LC/RF1 Manual de usuario

Commax

Commax CDV-70P Manual de usuario

Commax

Commax DRC-nAB2 Manual de usuario

Commax

Commax DP-4VHP Manual de usuario

Commax

Commax CIOT-L10M Manual de usuario

Commax

Commax CDV-43Q Manual de usuario

Commax

Commax CDV-43K Manual de usuario

Commax

Commax CM-800 Manual de usuario

Commax

Commax CDV-70A Manual de usuario

Commax

Commax DRC-4BH Manual de usuario

Commax

Commax CDV-70MH(M) Manual de usuario

Commax

Commax CDS-481L Manual de usuario

Commax

Commax DP-LA01M Manual de usuario

Commax

Commax CDV-43MH Manual de usuario

Commax

Commax CDV-70MF Manual de usuario

Commax

Commax CDV-50A Manual de usuario

Commax

Commax DRC-4DB Manual de usuario

Commax

Commax DP-4VHP Manual de usuario

Commax

Commax DP-4VHP Manual de usuario

Commax

Commax DP-SS Manual de usuario

Commax

Commax CDV-70QT Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario