Come.up Winch GIO 120s Manual de usuario

Self-Recovery Winch

Model:

PN: 853860 12V DC

Introduction

 Feature

Line pull: 5,443 kg / 12,000 lb synthetic rope first layer

Synthetic rope: 11 mm × 25.5 m (7/16” x 83.7’) synthetic rope

Brake: Exclusive brake design with No. 37C device

Clutch: Turn the mechanism lever for rapid rope payout

Control: Handheld pendant switch powers the winch

 Unpacking

．Winch assembly……………………………………………………........

1 pc

．Control box…………………………………………..............................

1 pc

．Remote control………………………………………………………….. 1 pc

．Synthetic rope with clevis hook……………………………………….. 1 pc

．Hawse fairlead…………………………………………………………….1 pc

．1.8 m (6′) 2 gauge battery lead…………………………………………

1 pc

 Read this manual carefully

You should carefully read and understand this manual before operating it.

Careless winch operation may result in personal injury hazards or property

damage.

Installation

Before using the winch, make sure all electrical components have no

corrosion or damaged; the environment

should be clear and dry.

 Winch and roller fairlead mountings

 It is very important that the winch will be

mounted on a flat and hard surface of

mounting channel in order to make sure the

motor, drum and gearbox housing are

aligned correctly.

 Hawse fairlead does not mount to the winch directly.

 The synthetic rope shall be wound in an under-wound orientation only.

 Four (4) M10 x 1.50 pitch 8.8 grade with 44 N-m torque settings

(maximum) high tensile steel bolts must be used in order to sustain the

loads imposed on the winch mounting.

 Two (2) M10 x 1.50 pitch 8.8 grade with 44 N-m torque settings

(maximum) high tensile steel bolts must be used for fastening the roller

fairlead into the mounting channel.

 Wiring Diagram

．Connect control ground to the motor.

．Attach the ground lead firmly to the negative (–) battery terminal and

power lead to the positive (+) battery terminal. The voltage drop for the

winch motor must not exceed 10% of the nominal voltage of 12V DC.

 Nut fastening for motor & contactor

1.Holding the lower nut on the stub and fastening the upper nut clockwise.

2.The torque setting for nut is 14 N-m/124 lb-in.

Warning

．The winch is not intended to be used in any manner for the movement or

lifting of personnel.

．The rated line pull shown is based on the first layer of rope on the drum.

．The rope winding on the drum shall remain 10 wraps from the drum to

support the rated load.

．Manufacturer is not responsible for the results of misuse, misapplication,

faulty installation or abuse of synthetic rope in any way.

Parts List

Item No. Description Part No. Qty

1 Waterproof motor w/housing 12V 883203 1

2 Tie bar kit 883641 2

3 Brake clutch base kit 883206 1

4 Drum bushing 880006 2

5 Drum kit 883207 1

6 Cone brake disc kit 883208 1

7 Gearbox support rack 883209 1

8 Grounding lead 883210 1

9 Synthetic rope 883273 1

10 1st shaft 883214 1

11 ring gear kit 883215 1

12 3rd stage carrier 883216 1

13 2nd stage carrier 883217 1

14 1st stage carrier 883218 1

15 1st pinion 883219 1

16 Clutch kit 883220 1

17 Gear box kit 883221 1

18 Hawse fairlead 883622 1

19 Mounting hardware 883223 1

20 Remote control 880025 1

21 Handsaver strap 880026 1

22 Control box 12V 883638 1

22-1 Remote socket kit 883235 1

22-2 Control pack 12V 883640 1

23 Clevis hook 881996 1

Winch Assembly

2022/03/10 Ver:02

Otros manuales de Cabrestante de Come.up Winch

Come.up Winch

Come.up Winch DV-3500i Manual de usuario

Come.up Winch

Come.up Winch Seal Gen2 12.5rs Manual de usuario

Come.up Winch

Come.up Winch GIO 120 Manual de usuario

Come.up Winch

Come.up Winch DV-6000S Manual de usuario

Come.up Winch

Come.up Winch Seal Slim 12.5 Manual de usuario

Come.up Winch

Come.up Winch DV-12 light Manual de usuario

Come.up Winch

Come.up Winch DV-2500i Manual de usuario

Come.up Winch

Come.up Winch GTD-2800 Manual de usuario

Come.up Winch

Come.up Winch Rhino 8 Manual de usuario

Come.up Winch

Come.up Winch Seal Gen2 16.5rs Manual de usuario

Come.up Winch

Come.up Winch Walrus 16.5 Manual de usuario

Come.up Winch

Come.up Winch SOLO 9.5rs Manual de usuario

Come.up Winch

Come.up Winch Rhino 12 Manual de usuario

Come.up Winch

Come.up Winch Seal Slim 9.5rs Manual de usuario

Come.up Winch

Come.up Winch DV-9i Manual de usuario

Come.up Winch

Come.up Winch APE-9 Manual de usuario

Come.up Winch

Come.up Winch GTD-800 Manual de usuario

Come.up Winch

Come.up Winch Seal Gen2 16.5 Manual de usuario

Come.up Winch

Come.up Winch Cub 3s Manual de usuario

Come.up Winch

Come.up Winch Rhino 8 Pro Manual de usuario

Come.up Winch

Come.up Winch 857130 Manual de usuario

Come.up Winch

Come.up Winch DV-9si Manual de usuario

Come.up Winch

Come.up Winch Seal Gen2 9.5 Manual de usuario

Come.up Winch

Come.up Winch Seal Slim 12.5rs Manual de instrucciones

Manuales populares de Cabrestante de otras marcas

WARRIOR

WARRIOR Trojan 40PUS12 Guía de referencia rápida

SVERO

SVERO 16 Manual de usuario

Warrior Winches

Warrior Winches C10000NH Manual de usuario

Badland Winches

Badland Winches 68146 Manual de usuario

Bush

Bush II Series Manual de usuario

Badland

Badland APEX 5500 Manual de usuario

Quadratec

Quadratec Q9000 Synthetic Manual

C-Max

C-Max VIGO Manual de usuario

Comeup

Comeup DV-9 Manual de usuario

Orvea

Orvea Italwinch 805 Manual de usuario

Prowinch

Prowinch PWJTHF300 Manual de usuario

Clas Ohlson

Clas Ohlson LD2000-A Manual de usuario

Topex

Topex 97X080 Manual de usuario

Eastbound

Eastbound MotoWinch 1707001 Manual de usuario

Runva

Runva EWD8000 Guía de referencia rápida

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Guía de instalación

Granit

Granit 11157675 Manual de usuario

TREX

TREX TB75 Manual de usuario