Colortrac SmartLF SC25m Manual de usuario

SCIM-002

Colortrac Ltd

Page 1 of 7

Issue 2

SC Instruction Manual

Date: 12/02/14

This is a confidential controlled document and is the property of Colortrac Ltd.

It is not to be copied or reproduced in part or whole.

SC Scanners Scanner Service Manual

Page 2 of 7

SC Scanners

SC25m, SC25c & SC25e

SC36m, SC36c & SC36e

SC42m, SC42c & SC42e

Instruction Manual

Issue 2

©Colortrac Ltd 2014

The product and the contents of this publication may be changed without prior notification.

Colortrac Ltd makes every effort to ensure this publication is free from error. Misprints, errors

or quality observations should be reported to Technical Support, Colortrac Ltd.

Colortrac Ltd shall not be liable for any damages, errors, issues or events that result from the

use of the equipment or this manual.

No part of this product or publication may be reproduced,

copied or transmitted in any form or by any means without

permission from:

Colortrac Ltd.

Units 3 –5 Brunel Court.

Burrel Road.

St Ives,

Huntingdon,

Cambridgeshire,

PE27 3LW.

United Kingdom.

Tel: +44 (0)1480 464618

Fax: +44 (0)1480 464620

www.colortrac.com

SC Scanners Scanner Service Manual

Page 3 of 7

1.1 SingleSensor Glass Sub-Assy

1.1.1 Safety Precautions

Ensure that the power and USB cables are completely disconnected from the scanner unit.

Ensure the scanner is positioned on a stable maintenance platform.

1.1.2 Tools

Medium Flat Screwdriver

Soft Cloth

1.1.3 Associated Part Numbers

10H014 : SingleSensor Glass Sub-Assy

1.1.4 Procedure

1. To Remove, Open the Error!

Reference source not

found. and using a Medium

Flat Screwdriver and a clean

cloth, insert the screwdriver

into the recess at the left end.

2. Gentle lever back the

screwdriver to prise the

SingleSensor Glass Sub-

Assy away from the Error!

Reference source not

found..

SC Scanners Scanner Service Manual

Page 4 of 7

3. Continue to gently pull the

whole SingleSensor Glass

Sub-Assy away from the

Error! Reference source

not found..

4. Remove the SingleSensor

Glass Sub-Assy

5. When refitting the

SingleSensor Glass Sub-

Assy, make sure the right

end is against the End Plate.

6. Position the SingleSensor

Glass Sub-Assy over the

Error! Reference source

not found. and make sure it

is central all the way along.

NOTE: Before fitting the SingleSensor Glass

Sub-Assy, clean both sides with a lint free

cloth to remove any dust, dirt or fingerprints.

SC Scanners Scanner Service Manual

Page 5 of 7

7. Press firmly all along the

SingleSensor Glass Sub-

Assy until all the latches are

locked in place.

8. Close the Error! Reference

source not found..

9. Reconnect the Power and USB cables to the Scanner and power up the scanner and

Utilities Program.

10. Run the

1.2 Calibration

11. , see below.

12. Re-cycle the scanner and software.

SC Scanners Scanner Service Manual

Page 6 of 7

1.3 Calibration

1.3.1 Associated Part Numbers

10H028 :

1.4 Calibration

and Error! Reference source not found. Target

1. Open the Error! Reference

source not found. and

clean the SingleSensor

Glass Sub-Assy with a soft

cloth. Close the Lid

Assembley.

2. Insert the Calibration Target

so that the black part

section is inserted first, face

up.

NOTE: It is necessary to remove the

Magnetic Paper Guide so the target can fit

centrally in scanner.

3. Double click the SmartLF

SC Utilities icon.

4. On the front page, click the

‘Calibrate’ button.

SC Scanners Scanner Service Manual

Page 7 of 7

5. Click ‘OK’ to except the

message.

6. After approx. 4 minutes, the

‘Calibration’ (or

Normalisation) is complete.

During calibration , the

target will move through the

scanner in stages several

times.

Otros manuales para SmartLF SC25m

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escáner de Colortrac

Colortrac

Colortrac SMARTLF SCAN Manual de usuario

Colortrac

Colortrac SmartLF Cx 40M Manual de usuario

Colortrac

Colortrac UC56T Manual de usuario

Colortrac

Colortrac SmartLF SG Series Manual de usuario

Colortrac

Colortrac SMARTLF SCAN Manual de usuario

Colortrac

Colortrac SmartLF 4080E Manual

Colortrac

Colortrac M25e Manual de usuario

Colortrac

Colortrac SmartLF SG Manual de usuario

Colortrac

Colortrac T Series Manual de usuario

Colortrac

Colortrac SmartLF SG Series Manual de usuario

Colortrac

Colortrac SmartLF Ci 40 Manual de usuario

Colortrac

Colortrac SmartLF Gx 54 Manual

Colortrac

Colortrac SmartLF SGi 36 Manual de usuario

Colortrac

Colortrac SmartLFGx+ 28 Instrucciones de instalación

Colortrac

Colortrac SmartLF Cx40m Manual de usuario

Colortrac

Colortrac L24e Manual de usuario

Colortrac

Colortrac SmartLF Cx 40C Manual de usuario

Colortrac

Colortrac SmartLF Ci 40E Instrucciones de instalación

Colortrac

Colortrac SmartLF SC25m Manual de usuario

Colortrac

Colortrac SC Series Manual de usuario

Colortrac

Colortrac SmartLF Scan! 24 Manual de usuario

Colortrac

Colortrac SMARTLF SCAN Manual de usuario

Colortrac

Colortrac 3 Series Manual de usuario

Colortrac

Colortrac Flatbed 24120 Manual de usuario

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario