Cognex DataMan 503 Manual de usuario

DataMan®503

Quick Reference Guide

2021 May 26

Revision: 6.1.10-SR1.3

Precautions

To reduce the risk of injury or equipment damage, observe the following precautions

when you install the Cognex product:

lRoute cables and wires away from high-current wiring or high-voltage

power sources to reduce the risk of damage or malfunction from the

following causes: over-voltage, line noise, electrostatic discharge (ESD),

power surges, or other irregularities in the power supply.

lChanges or modifications not expressly approved by the party responsible

for regulatory compliance could void the user’s authority to operate the

equipment.

lEnsure that the cable bend radius begins at least six inches from the

connector. Cable shielding can be degraded or cables can be damaged or

wear out faster if a service loop or bend radius is tighter than 10X the cable

diameter.

lThisdevice should be used in accordance with the instructions in this

manual.

lAll specifications are for reference purposes only and can change without

notice.

lThis product is intended for industrial use in automated manufacturing or

similar applications.

lThe safety of any system incorporating this product is the responsibility of

the assembler of the system.

lThisproduct does not contain user-serviceable parts. Do not make

electrical or mechanical modifications to product components.

Unauthorized modifications can void your warranty.

Product Overview

1 External illumination mounting point

2 Mounting holes (M3 x 5mm)

3 Trigger button

4 Power

5 Train status

6 Good/bad read

7 Network

8 Error

9 Tuning button

10 Peak meter

11 Synchronized Acquisition

12 RS-232

13 External light control

14 Ethernet

15 Power I/O

DataMan 503 Accessories

16 mm, 25 mm and 35 mm lens (LEC-CFFxx-F8)

(xx specifies focal length)

Connection cable 24V, I/O (CCBL-05-01)

Ethernet M12 to RJ45 cable (CCB-84901-y00x-xx) (y straight/angled, x-xx

specifies length)

External light cable (CCB-M12x4MS-xxx) (xxx specifies length)

Only compatible with CLRR / CLRB / CLRO / CLRS / CLRD illumination

External light control cable for DataMan, 5 meters in length with flying leads (CCB-

M12XFLY-05)

Bar light cable (xxx specifies length:300, 500, 1000, 2000 mm)(IVSL-5PM12-

Jxxx)

Compatible with IVSL lights, except IVSL-LX280

I/O extension cable, 5m straight (CKR-200-CBL-EXT)

Power cable for multiple bar lights (use in combination with IVSL-5PM12-5) (CCB-

FOV25-MAL-012)

RS-232 M8 to SUB-D cable (CCB-M8X4-xx)

Synchronization Cable (DM503-SYNC-012 - 1.2 meter, DM503-SYNC-05 - 5

meter)

Xpand 15 (DMA-FOVE-15)

Xpand 25 (DMA-FOVE-25)

SVL Light Bar (IVSL-YLW300-xxx)

Bar light, blue (IVSL-LX520-470)

Bar light, red (IVSL-LX520-650)

DM503 high power illumination (DM503-HPIA-xxx)

Dimensions

Field of View and Reading Distances

16 mm lens for 1D codes (green) 25 mm lens for 1D codes(blue) 35 mm lens for 1D codes (red)

Device Distances in mm/1D min. code

16 mm lens

Distances in mm/1D min. code

25 mm lens

Distances in mm/1D min. code

35 mm lens

DM503 500 5 MIL 790 5 MIL 1100 5 MIL

980 10 MIL 1530 10 MIL

1270 13 MIL 1990 13 MIL

1460 15 MIL

16 mm lens for 1D codes (green) 25 mm lens for 1D codes(blue) 35 mm lens for 1D codes (red)

Device Distances in mm/1D min. code

16 mm lens

Distances in mm/1D min. code

25 mm lens

Distances in mm/1D min. code

35 mm lens

DM503 250 5 MIL 400 5 MIL 460 5 MIL

480 10 MIL 750 10 MIL 1070 10 MIL

620 13 MIL 970 13 MIL 1380 13 MIL

710 15 MIL 1120 15 MIL 1580 15 MIL

Connecting the Reader

Perform the following steps:

1. Mount the reader.

2. Connect the Ethernet cable to a computer or a switch.

3. Connect the breakout cable.

Otros manuales para DataMan 503

Tabla de contenidos

Otros manuales de Lector de código de barras de Cognex

Cognex

Cognex DataMan 8000 Series Manual de usuario

Cognex

Cognex DataMan 370 Series Instrucciones de funcionamiento

Cognex

Cognex DataMan 470 Series Manual de usuario

Cognex

Cognex DataMan 8072 DL Manual de usuario

Cognex

Cognex In-Sight 2800 Series Manual de usuario

Cognex

Cognex DataMan 8600 Series Manual de usuario

Cognex

Cognex DataMan 260 Series Manual de usuario

Cognex

Cognex DataMan 475 Verifier Manual de usuario

Cognex

Cognex DataMan 8072 Verifier Manual de usuario

Cognex

Cognex DataMan 300 Series Manual de usuario

Cognex

Cognex DataMan 8000 Series Manual de usuario

Cognex

Cognex MX-1000 Manual de usuario

Cognex

Cognex DataMan 8600 Verifier Series Manual de usuario

Cognex

Cognex DataMan 8072 DL Manual de usuario

Cognex

Cognex DataMan 8700 DX Manual de usuario

Cognex

Cognex DataMan 300 Series Manual de usuario

Cognex

Cognex DataMan 9500 Manual de usuario

Cognex

Cognex DataMan 8072 ER Manual de usuario

Cognex

Cognex DataMan 60 Series Manual de usuario

Cognex

Cognex DataMan 260 Manual de usuario

Cognex

Cognex DataMan 475 Manual de usuario

Cognex

Cognex DataMan 150 Manual de usuario

Cognex

Cognex DataMan 280 Series Manual de usuario

Cognex

Cognex DataMan 300 Series Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario