Code Alarm CA 650 Manual de usuario

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY

PRECAUTIONS may not apply. Please see your installing dealer for more information.

Owner's Manual

CA 650

Remote Vehicle Control System

Vehicle Security and Remote Start

System with Two Way Confirming

LCD Remote Control

Table of Contents

Using Your Remote Control .......................................................... 3

Arming the security system

Passive Arming

Hidden alarm function

Disarming the security system

Two stage door unlock*

Automatic rearm

Valet mode

Using Your Remote Control, continued .................................... 4

Activating trunk release*

Activating optional AUX 1*

Using the car finder feature

Using the personal protection alarm

2-car mode

Anti-car jacking mode

Using Your Remote Vehicle Starter ...............................5

Remote starting your vehicle

Entering your vehicle while it is running via remote vehicle start

Preheating or Precooling the vehicle’s interior

Using the “quick-stop” feature

Using Your Remote Vehicle Starter, continued....................... 6

Operating the 2 / 3 hour start up timer mode

Turbo timer mode*

Remote start safety features

Additional LCD Remote Control Features ............................... 7

LCD Icons and their Indications ............................................... 8

LED and Siren/Horn Indications ............................................... 9

Replacing Remote Control Batteries ..................................... 10

Emergency Override Procedure ............................................ 11

* May require additional installation labor, components and installation cost

Using Your Remote Control

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the LOCK icon button on the remote

control. The system will sound once and the parking lights will flash once, indicating the system is

armed. The doors will also lock at this time (if equipped and connected). The status indicator (red

warning light on the dash) will blink steadily, once per second. To arm the system silently, press the

LOCK and UNLOCK icon buttons for 1 second. The parking lights will flash 1 time, indicating the

system is armed, has locked the doors (if equipped and connected) and activated the starter disable

feature. The status indicator (red warning light on the dash) will blink steadily, once per second.

Passive Arming Bypass

If passive arming is enabled on your system, while the system is disarmed, Press the TRUNK button

twice, the system will respond with [1] chirp and the LED will turn “ON”. The security system will remain

in this temporally by-passed state for as long as you wish. To exit passive by-pass, press the

transmitter LOCK or UNLOCK button and the system will return to normal status.

Hidden Alarm Function

Press the TRUNK button first, within 3 seconds press the LOCK button to activate the hidden alarm

function. The security system will arm and with “Hidden Alarm Function”. The siren / horn will be

silenced even if the system is triggered while in the armed status but the 2-way remote will respond.

Disarming the Security System

To disarm the system press the UNLOCK icon button. The system will sound twice and the parking

lights will flash twice, and the doors will unlock (if equipped and connected). To disarm the system

silently, press the LOCK and UNLOCK icon buttons for 1 second. The parking lights will flash,

indicating the system is disarmed and has unlocked the doors (if equipped and connected).

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the UNLOCK icon button one time on the remote

control will unlock only the driver’s door. Press UNLOCK again within three seconds to unlock the

remaining doors.

Automatic Re-Arm

If this feature is enabled on your system, the security system will automatically re-arm itself 60 seconds

after disarming with remote transmitter. The Automatic Re-Arm feature will cancel if any door is opened

before the 60 second timer has elapsed.

Valet Mode

To engage valet mode:

1. Turn the ignition key to the ON position.

2. Press and hold the emergency override button.

3. The red dashboard mounted LED will light solid indicating that the system is in valet mode.

When valet mode is activated the dash mounted status LED will light solid, and all security functions

will be disabled.

To disengage valet Mode:

1. Turn the ignition key to the ON position.

2. Press and release the emergency override button.

3. The red dashboard mounted LED will turn off indicating that the system hasexited valet

mode.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for

more than 2 seconds. 3

Using Your Remote Control, continued

Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the TRUNK icon button on the remote

control for 2 seconds will open the vehicle’s trunk or hatch.

Activating Optional AUX 1 (Optional)

If this feature is enabled on your system, pressing the LOCK and TRUNK icon buttons on the remote

control simultaneously will activate an optional feature. This feature can be programmed for a wide

range of functions like power window or sunroof automation, please consult your installing dealer to

determine the functionality of your system.

Using the Car Finder Feature

When the system is armed press the LOCK icon button on the remote control to locate your vehicle.

The system will sound 6 times and the parking lights will flash 12 times.

Using the Personal Protection Alarm (Panic)

Press and hold the LOCK icon button on the remote control for 3 seconds to activate the personal

protection alarm. During panic mode, the normal function of the transmitter buttons will be

suspended. The transmitter’s LOCK and UNLOCK buttons can be used to lock and unlock the door

(if the option is installed). To stop the alarm, press and hold the LOCK button on the transmitter again

for 3 seconds. The system will automatically stop after 30 seconds.

2 Car Mode

It is possible to program your remote transmitter to operate 2 vehicles with a CA650 installed in each.

To active 2 car mode first enter TRANSMITTER FUNCTION MODE by pressing and holding the

TRUNK and STAR buttons for 3 seconds, the transmitter will give a loud beep, then press and

release the ”IIII

IIII

II” icon button. the LCD screen will display the ”IIII

IIII

II” icon and will now operate vehicle

#2. NOTE: The transmitter must first be programmed to the second vehicle.

Car Jack Mode

ACTIVE Car Jack mode: With ignition ON press and hold the LOCK and UNLOCK buttons for 2

seconds. The parking lights will turn on for 1.5 seconds to indicate Car Jack mode has been entered.

PASSIVE Car Jack mode: Turn the ignition ON, Car Jack mode is automatically entered.

TRIGGERING Car Jack mode: Car Jack mode will be triggered when a door is opened then closed.

When Car Jack mode is on and the system will act as follows;

1. 50 seconds after being triggered the siren will chirp for 15 seconds, durring this 15

seconds you will be alerted to push the valet button to turn off Car Jack mode. If Car Jack

mode is not turned off at this time it will advance to the next step.

2. Following the 15 second chirps (total time now 65 seconds) the siren will go into full

sound and the parking lights will start flashing.

3. 90 seconds after trigger in, addition to the siren and parking lights, the system will activate

the starter kill.THE SYSTEM WILL REMAIN INTHIS STATE UNTILLTHE BATTERY IS

DEPLEATED.

OVERRIDE THE SYSTEM TO TURN OFF CAR JACK MODE: Turn the ignition OFF then On and press

the valet button within 10 seconds. NOTE: If you have activated the password pin code you will need

to use your pin code to override Car Jack mode. (see your dealer about the password pin code

feature).

Using Your Remote Vehicle Starter

Remote Starting Your Vehicle

To activate the remote vehicle start function, press and release the STAR button on the remote control two

(2) times within 2 seconds. The system will sound, the parking lights will flash 1 time and the system will

check the vehicle to ensure it is safe to start. If all safety parameters are correct, the vehicle will start within

5 seconds. The vehicle’s parking lights will turn on (or flash depending on system settings) as a visual

indication that the vehicle has started and is running. Press and release the STAR button on the remote

control two (2) times within 2 seconds again to turn the vehicle off.

If your vehicle stalls or does not start, the system will pause 5 seconds, then try 2 more times to start the

vehicle (a total of 3 attempts). The system will pause 5 seconds between each start attempt. If the vehicle

does not start after the fourth attempt, the system will abort the remote vehicle start process.

Entering the Vehicle while it is Running via Remote Vehicle Start

1. Unlock the vehicle’s doors.

2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!

3. Insert the key into the ignition switch and turn to the ON or RUN position.

4. Press the brake pedal. The remote vehicle starter will disengage and the vehicle will operate normally.

Preheating or Precooling the Vehicle’s interior

Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the

system starts the vehicle, the heater or air conditioning will activate and heat or cool the vehicle’s interior to

your setting.

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior warm or cool), the

quick-stop feature allows you to do this while keeping your vehicle secure and your keys with you.

To engage quick stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot off the brake pedal, press and release the STAR button on

the remote control two (2) times within 2 seconds. The LED will flash 3 times to confirm

quick stop is entered.

3. Remove the keys from the ignition and exit the vehicle. Press the LOCK icon

button on the remote control to lock the vehicle’s doors if desired.

Note: Do not leave children or animals unattended in the vehicle when using the

quick-stop feature.

Using Your Remote Vehicle Starter, continued

Operating the 2 / 3 Hour Start Up Timer Mode

The system has the ability to start the vehicle every 2 or 3 hours with a MAXIMUM of 6 start cycles. This

feature is especially useful in cold climates where the only means to keep the engine and engine fluids

warm is to periodically start the engine.

WARNING!

Be certain that the vehicle is outdoors before using this or any remote starting device. A running engine

produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs.

DO NOT remote start the vehicle if it is garaged.

Selecting between 2 and 3 hour start up: (default 3 hour)

Selection is made in option programming.

To begin the 2 / 3 hour start up timer mode:

1. Activate the remote vehicle start feature using the remote control.

2. As soon as the vehicle is running and the parking lights have turned on immediately press

the TRUNK button 2 times within 2 seconds.

3. Press the STAR button within 3 seconds.

4. Press the brake pedal to stop the vehicle from running.

To exit the 2 / 3 hour start up timer mode:

1. Turn the Ignition ON, the LED and parking lights will flash 4 times and the siren/horn will

chirp four times to indicate the system has exited start up mode.

1. Activate the remote vehicle start feature using the remote control.

2. As soon as the vehicle is running and the parking lights have turned on immediately press

the TRUNK button then press and hold the STAR button for 2 seconds. The parking lights

will flash 4 times and the siren/horn will chirp for times indicating start up mode has exited.

Turbo Timer

To engage the Turbo Timer feature:

1. With the vehicle running via the ignition key and your foot off of the brake pedal.

2. Engage the vehicle’s parking brake and press the UNLOCK and STAR buttons simultaniously.

3. The vehicle’s parking lights will turn on to verify the Turbo Timer feature has been activated.

4. Turn the ignition key OFF, the vehicle will continue to run untill the pre-programmed time has

elapsed (1, 3, or 5 minutes)

To disengage the turbo timer feature:

1. Press the vehicle’s brake pedal.

2. Turn the safety control switch to the OFF position (optional).

Remote Start Safety Features

For safety and security reasons, the system will shutdown or prevent the remote vehicle starter from

activating if any of the following occur:

1. The vehicle hood is open.

2. The brake pedal is pressed prior to turning the ignition key to the ON position.

3. The engine is over-reved (tach checking only).

4. The safety control switch is turned to the OFF position (optional).

Additional 2-Way LCD Remote Control Functions

Check Vehicle Status

Press and release the TRUNK button and then simultaniously press the LOCK and UNLOCK buttons,

the transmitter will respond with one melody sound and display the current status of the vehicle.

LCD Remote Control Display Illumination

Press and release the TRUNK button on the LCD remote control one time. The display will illuminate for

5 seconds.

LCD Remote Control Vibrate or Tones

First enter TRANSMITTER FUNCTION MODE by pressing and holding the TRUNK and STAR buttons for 3

seconds, the transmitter will give a loud beep, then press and release VIBRATE icon button.

Page Call Out

With the ignition OFF, press the valet programming button for two seconds, the vehicle will chirp one time

and the 2-way transmitter will play the paging melody and display the call icon.

Bypassing The Shock Sensor

Press LOCK to arm the system then within 3 seconds press LOCK again.

NOTE: The system will only change the shock sensor setting for one arm cycle and will be defaulted back to

normal operation the next time the system is armed.

Battery Save Mode

While in POWER SAVE MODE the 2-way LCD transmitter will NOT look for any incoming signals from the

main unit untill a button is pressed. The LCD screen will display SAVE to indicate that power save mode

is ON. To enter power save mode first enter TRANSMITTER FUNCTION MODE by pressing and holding

the TRUNK and STAR buttons for 3 seconds, the transmitter will give a loud beep, then press and release

the SAVE icon button.

Clear Flashing Icons and Melody Sound

Press the TRUNK button, within 3 seconds simultaniously press the LOCK and STAR buttons. This will

clear the melody sound and flashing icons on the LCD screen.

Stopping LCD Trigger Melody

To stop the alarm trigger melody if the system has been triggered WITHOUT disarming the system, press

any button one time only, this will not send a command to the vehicle at this time and the alarm will

continue to sound.

Out of Range Indication

If this option is selected in programming the unit will check if it is within range every 20 minutes. If the

transmitter is within range the ANTENNA icon will be displayed on the LCD screen, if the remote is out

of range the transmitter will sound 5 short beeps and the ANTENNA icon will disappear.

LCD Remote Control ICON’s

IGN

ARM

SAVE

LOCK UNLOCK

SYSTEM ARMED VALET MODE

TRANSMITTING IN-RANGE INDICATOR

HOOD/TRUNK TRIGGER DOOR TRIGGER

WARN AWAY TRIGGER FULL SHOCK TRIGGER

IGNITION ON/TRIGGER ENGINE RUNNING

TIME CONTROL START 2 CAR MODE

BATTERY INDICATOR BATTERY SAVE MODE

PAGE FROM VEHICLE VIBRATE/SILENT MODE

LED and Siren/Horn Indications

LED Display Indications

LED Function

OFF DISARMED

SLOW FLASH ARMED

FASTFLASH PASSIVEARMING

ON (SOLID) VALETMODE

2FLASH... PAUSE ZONE 2 TRIGGER, HOOD/TRUNK

3FLASH... PAUSE ZONE 3 TRIGGER, DOOR

4FLASH... PAUSE ZONE 4 TRIGGER, SHOCK

5 FLASH... PAUSE ZONE 5 TRIGGER, IGNITION

Siren/Horn Indications

Chirps Function

1 ARM

2 DISARM

3 DOORAJARUPONARMING

4 DISARM/ TRIGGERED

6 CAR LOCATOR

Parking Light Flash Indications

Flashes Function

1 ARM

2 DISARM

3 DISARM/ TRIGGERED

12 CAR LOCATOR

ON (SOLID) REMOTESTARTED

Replacing Remote Control Batteries

2-way LCD Remote Control:

The AAA alkaline battery inside the 2-way LCD remote control should last approximately 1 year under

normal use. When the batteries become weak you will notice the remote control range (the distance

from the vehicle the remote control will work) deteriorate and the BATTERY icon on the LCD remote

control will show.

1. Slide the small release tab on the back of the remote control to the unlock position.

2. Gently slide the battery cover off of the remote control.

3. Remove the old AAA battery, observing the +/- symbols on the battery,

and replace with a new AAA battery.

4. Gently slide the battery cover on to the back of the remote control and lock the release tab in

place.

5. Test operation of the remote control.

1-Way 4 Button Remote Control:

The 12 volt battery (model GP23a) inside each remote control should last approximately 1 year under

normal use. When the batteries become weak you will notice the remote control range (the distance

from the vehicle the remote control will work) deteriorate and the small LED on the remote control will

dim. To replace the remote control batteries:

1. Gently unsnap the halves of the remote control apart.

2. Remove the12 volt battery out of the circuit board, observing the +/- symbols on the

batteries and replace with new 12 volt battery.

3. Gently snap the halves of the remote control back together.

4. Test operation of the remote control.

Tabla de contenidos

Otros manuales de Alarma de coche de Code Alarm

Code Alarm

Code Alarm ca 1151 Manual de usuario

Code Alarm

Code Alarm CA 521 Manual de usuario

Code Alarm

Code Alarm CATX130 Instrucciones de funcionamiento

Code Alarm

Code Alarm CA-670 Manual de usuario

Code Alarm

Code Alarm CA-160 Manual de usuario

Code Alarm

Code Alarm CATX120 Instrucciones de funcionamiento

Code Alarm

Code Alarm CATX2LED Instrucciones de funcionamiento

Code Alarm

Code Alarm CATX2LCD Instrucciones de funcionamiento

Code Alarm

Code Alarm F10 Manual de usuario

Code Alarm

Code Alarm CSI-200 Manual de usuario

Code Alarm

Code Alarm CA-330 Manual de usuario

Code Alarm

Code Alarm PROFESSIONAL CA 1045 Manual de usuario

Code Alarm

Code Alarm CATX520 Instrucciones de funcionamiento

Code Alarm

Code Alarm CA 1150 Manual de usuario

Code Alarm

Code Alarm CA-500 Manual de usuario

Code Alarm

Code Alarm CA-640 Manual de usuario

Code Alarm

Code Alarm CA 6551 SST Manual de usuario

Code Alarm

Code Alarm Professional Series CA 1550 Manual de usuario

Code Alarm

Code Alarm ca 1552 Professional Series Manual de usuario

Code Alarm

Code Alarm CA 170 Manual de usuario

Code Alarm

Code Alarm CA-125 Manual de usuario

Code Alarm

Code Alarm ca 2051 Manual de usuario

Code Alarm

Code Alarm CA- 550 Manual de usuario

Code Alarm

Code Alarm CSI-300 Manual de usuario

Manuales populares de Alarma de coche de otras marcas

Clifford

Clifford 3606X Manual de usuario

Ultra Start

Ultra Start 2500M SERIES Manual de usuario

Ultra Start

Ultra Start 650 Series Manual de usuario

Audiovox

Audiovox Prestige Platinum+ APS-511C Manual de usuario

Sparkrite

Sparkrite SRA8 Manual de usuario

Viper

Viper 4708V Manual de usuario

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manual

Falcon

Falcon Predator XL3 Guía del usuario

Audiovox

Audiovox Auto Security XR91 Instrucciones de funcionamiento

Clifford

Clifford Sabre II Manual de usuario

CrimeStopper

CrimeStopper CS-8717 Guía de inicio rápido

Ultra Start

Ultra Start 450 SERIES Manual de usuario

Scytek electronic

Scytek electronic Vectra X3 Manual de usuario

Excalibur

Excalibur AL-1860-EDPB Manual de usuario

Clifford

Clifford CYBER 2 Manual de usuario

Gemini

Gemini 7057 Manual de usuario

FlashLogic

FlashLogic FLRSBA PRESTIGE Manual de usuario

Magicar

Magicar FAI-440 Manual de usuario