Cobra POWRFLO Manual de usuario

23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016

www.cobrausa.com

05/10 1®

Instruction Manual >

606

0102B

Page

of 2

DOCUMENT NO. 0017 REV. A

Cobra recommends you always wear a helmet while riding. Please never operate your motorcycle while unde

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

Items Supplied >

–

INTAKE COVER W/ IN

TAKE SCREEN ASSEMBLY

1 –K&N® VENTURI AIR FILTER

1 –BILLET VELOCITY STACK

1 –MOUNTING PLATE

1 –SUPPORT BRACKET

1 –INTAKE GASKET

2 –O-RING, SILICONE

2 –BREATHER BOLT, 3/8”-16 X 1”

3 –BOLT, 1/4”-20 X 7/8”, BUTTONHEAD W/ LOCK PATCH

3 –BOLT, 1/4”-20 X 5/8”, HEX FLANGE

–

LOCK WASHER, 1/4” TOOTHED

Application(s) >

HARLEY:

SOFTAIL 2000-10

ROCKER 2008-10

DYNA 2000-10

Read all instructions carefully and completely before installing your new POWRFLO

Intake.

1. Remove the allen bolt from the center of the stock air cleaner to remove the cover. Remove the (3)

bolts securing the formed bracket located on top of the air filter. Then remove and discard the air filter,

air box and seals/gaskets.

2. Remove and discard the (2) stock breather bolts and (2) stock o-rings from the cylinder heads; save

the breather hoses for reuse during installation.

3. Insert (3) supplied 1/4”-20 x 3/4” buttonhead bolts with lock washers through the mounting holes in

the velocity stack and mounting plate. While holding that assembly together with one hand, insert the

(2) breather hoses through the mounting plate and into the velocity stack with the hoses rotated

outward, as shown in Figure 1. Make sure the hoses are bottomed out in the back of the velocity

stack.

4. Join together the assembly from Step 3 with the supplied support bracket and gasket then start

threading the (3) buttonhead bolts into the throttle body, but do not tighten.

VELOCITY

STACK

SUPPLIED

INTAKE

GASKET

MOUNTING

PLATE

FIGURE 1

(3) 1/4”

20 x 3/4”

BUTTONHEAD

BOLTS W/

LOCK PATCH

(2) SUPPLIED

O-RINGS

(2) SUPPLIED

BREATHER

BOLTS

(2) STOCK

BREATHER

HOSES

SUPPORT

BRACKET

(3) LOCK

WASHERS

VELOCITY STACK BACKSIDE

BREATHER SLOTS

ORIENT TO TOP

WHEN ASSEMBLED

23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016

www.cobrausa.com

05/10 2®

Instruction Manual >

606

0102B

Page 2 of 2

5. Place a supplied o-ring onto both supplied breather bolts. Insert the breather bolts through the

support bracket openings and into the cylinder heads and lightly snug. Now snug the (3) buttonhead

bolts evenly, and then fully tighten them to the throttle body. Tighten the (2) breather bolts.

6. Insert outer end of rubber hoses over nipples on breather bolts.

7. Place the supplied K&N®filter onto the velocity stack. Insert the intake screen assembly into the

POWRFLOTM intake cover so the holes in the bent tabs align with the threaded bosses.

8. Place the intake cover over the air filter and align threaded bosses with the mounting plate holes.

Insert the (3) supplied 1/4"-20 x 5/8” hex flange bolts through the mounting plate, intake screen and

into the intake cover then tighten. See Figure 2.

DOCUMENT NO

. 0018

REV. B

IMPORTANT

To achieve optimum performance from your new POWRFLOTM

Air Intake it is suggested

that you install a Cobra Fi2000®Digital Fuel Processor. Visit www.fi2000r.com

ASSEMBLY FROM

STEPS 3-6

K&N

VENTURI

AIR FILTER

(3) 1/4”

5/8

”

HEX FLANGE

BOLTS

INTAKE

SCREEN

INTAKE COVER

FIGURE

To clean your black air intake system use a liquid

based soap detergent, such as

dishwashing soap applied with a soft cloth and rinse with clean water. Note: Avoid

abrasive cleaning methods such as granular or dry cleansers, simple green, Scotch-Brite

or steel wool pads. Abrasives may breach the coating and shorten life.

CLEANING

INSTRUCTIONS:

Otros manuales de Accesorios para motocicletas de Cobra

Cobra

Cobra Fi2000 Manual de usuario

Cobra

Cobra Fi2000 Manual de usuario

Cobra

Cobra 602-3000 Manual de usuario

Cobra

Cobra 602-2704 Manual de usuario

Cobra

Cobra Fi2000 Manual de usuario

Cobra

Cobra Ride Loud Manual de usuario

Cobra

Cobra 01-3265 Manual de usuario

Cobra

Cobra 602-2615 Manual de usuario

Cobra

Cobra 4918 Manual de usuario

Cobra

Cobra 06-3750 Manual de usuario

Cobra

Cobra 602-2005 Manual de usuario

Cobra

Cobra 02-6468 Manual de usuario

Cobra

Cobra 02-4265 Manual de usuario

Cobra

Cobra 602-2500 Manual de usuario

Cobra

Cobra Fi200R Manual de usuario

Cobra

Cobra Fi2000 Manual de usuario

Cobra

Cobra PowrFlo 06-0467-01 Manual de usuario

Cobra

Cobra 602-1103B Manual de usuario

Cobra

Cobra Classic LT Manual de usuario

Cobra

Cobra 601-2108 Manual de usuario

Cobra

Cobra 602-2702 Manual de usuario

Cobra

Cobra 602-2600 Manual de usuario

Cobra

Cobra FXLR Manual de usuario

Cobra

Cobra 602-2000 Manual de usuario

Manuales populares de Accesorios para motocicletas de otras marcas

SRC

SRC B-TRK502-01-01-SL Manual de usuario

3M Speedglas 9100 MP Manual de usuario

hepco & becker

hepco & becker 6307520 00 01 Manual de usuario

HOMCOM

HOMCOM AA0-077 Manual de usuario

hepco & becker

hepco & becker 6307558 00 01 Manual de usuario

Wunderkind Custom

Wunderkind Custom 106503-F15 Guía del usuario

Dräger

Dräger HPS 3500 Manual de usuario

M-WAVE

M-WAVE SKI Manual de usuario

Kuryakyn

Kuryakyn 6212 Manual de usuario

hepco & becker

hepco & becker 6507504 00 01 Manual de usuario

Tool it

Tool it PROMAX LCD 9.13G Manual de usuario

Custom Dynamics

Custom Dynamics TruWrapz Manual de usuario

Roof

Roof RO200 CARBON Manual de usuario

Kabuto

Kabuto Japan IBUKI Manual de usuario

PUIG

PUIG 5051 Manual de usuario

rizoma

rizoma ZTH050 Manual de usuario

Joubert

Joubert 10001711 Manual de usuario

Sperian

Sperian Optrel p420 Manual de usuario