Clifford Prime Level Three Manual de usuario

Welcome to the world

of high-technology

vehicle security and convenience

Your Clifford Electronics Prime Level THREE security upgrade package adds extensive security features to

the keyless entry functions of your vehicles factory remote.

TO ARM SECURITY:

Lock the doors with your factory remote control.* The LED inside the car will flash

repeatedly to confirm that the starter motor is electronically immobilized and the

doors will be monitored.

TO DISARM SECURITY:

Unlock the doors with your factory remote control.* The LED will stop flashing and

the system will restore starter motor function. If your system is so equipped, the interior

lights will also turn on and stay on for 30 seconds or until you turn on the ignition.

* If your factory keyless entry system does not provide audible confirmation, the system can be wired to provide

two brief horn beeps upon locking/arming and one beep upon unlocking/disarming.

AutoArming™

This passive arming feature can be turned on (it is factory turned off) to automatically arm and lock 30

seconds after exiting if you forget to use the remote. For programming instructions, call Clifford Prime

Customer Service toll-free at 877-48-PRIME or download from

www.clifford.com/prime

D:...31-923 level 3 owners.vp

Mon Jul 26 16:07:59 1999

Color profile: Disabled

Composite Default screen

Starter AutoImmobilization

While armed, the starter motor is electronically immobilized. An optional triple-point upgrade is

available to additionally immobilize the ignition system and fuel pump for enhanced security.

LED status indicator

 Flashing = Armed & Locked  Off = Disarmed and unlocked  On = Valet mode

Optional CliffNet Wizard™ & DataPort Interface Connector

If you opted to have the Clifford DataPort interface connector installed, you can use our CliffNet

Wizard software to access your Prime system through your Windows 95/98 PC or your Windows CE

palmtop. CliffNet Wizard will show you right on the screen, all programmable feature settings. You can

change settings, customize features, view a chronological history of trigger and sensor activations, and

much more. Its actually fun! To learn more and download this free software, go to

www.clifford.com/wizard

Smart prior intrusion attempt alert

If the alarm sounded while you were away, the system will provide 3 horn beeps (if so wired) when you

remotely unlock to alert you to approach with caution.

D:...31-923 level 3 owners.vp

Mon Jul 26 16:07:59 1999

Color profile: Disabled

Composite Default screen

Smart AutoTesting™

If a

door

is ajar when you remotely arm, youll hear the usual 2 beeps (if so wired), then, 5 seconds later,

4 more beeps (this warning is not possible on vehicles that have delayed or dimming courtesy lights).

Valet Mode

Valet mode lets you override all security features if your factory remote fails or needs a new battery.

Coded valet mode via the valet switch

NOTE: If you lose the use of your remote (lost; dead battery; etc.), you can

turn off the alarm by enabling valet mode.

To enable valet mode, you enter a code on the switch mounted behind the underdash LED assembly.

Entering the code

To enter the code, toggle the valet switch to the left 2 times, then once to the right.

The system’s factory-set valet code is 2: left, left, right.

To set your own code, request programming instructions from Clifford Prime Customer Service at

877-48-PRIME or download from

www.clifford.com/prime

D:...31-923 level 3 owners.vp

Mon Jul 26 16:07:59 1999

Color profile: Disabled

Composite Default screen

To enable valet mode

1. Turn the ignition on or start the engine (you may also do this while the engine is running).

2. Enter your valet code (factory-set valet code is 2: left, left, right) on the switch mounted behind the LED

assembly.

Continue

holding the switch to the right for 5 seconds, then release. The LED will stay on for

ongoing visual confirmation of valet mode.

To exit valet mode and restore normal operation

1. Turn the ignition on or start the engine (you may also do this while the engine is running).

2. Enter your valet code (left, left, right). The LED will turn off.

User-selectable features

Many of your Prime systems features can be changed via a programming procedure. To do so, request

programming instructions by calling Clifford Prime Customer Service toll-free at 877-48-PRIME or

download from

www.clifford.com/prime

. Or use the CliffNet Wizard Windows software (see page 2).

877-48-PRIME  www.clifford.com/prime

D:...31-923 level 3 owners.vp

Mon Jul 26 16:08:00 1999

Color profile: Disabled

Composite Default screen

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Alarma de coche de Clifford

Clifford

Clifford Polaris 4 Manual de usuario

Clifford

Clifford Concept450 Manual de usuario

Clifford

Clifford Polaris 4 Manual de usuario

Clifford

Clifford Matrix 2.2X Manual de usuario

Clifford

Clifford AvantGuard 3 Manual de usuario

Clifford

Clifford Smart Siren 4 Manual

Clifford

Clifford ACE 2000 Manual de usuario

Clifford

Clifford 4606X Manual de usuario

Clifford

Clifford 20 Manual de usuario

Clifford

Clifford CallGuard Manual de usuario

Clifford

Clifford XL1000 Manual de usuario

Clifford

Clifford concept 50x Manual de usuario

Clifford

Clifford 590.4X Manual de usuario

Clifford

Clifford Concept 100 Manual de usuario

Clifford

Clifford 3305X Manual de usuario

Clifford

Clifford cyber Arrow 3 Manual de usuario

Clifford

Clifford GP500 Manual de usuario

Clifford

Clifford Sabre Manual de usuario

Clifford

Clifford Nova 3 Manual de usuario

Clifford

Clifford IntelliGuard 6000 Manual de usuario

Clifford

Clifford Auto Immobilizer Manual de usuario

Clifford

Clifford Nova III Manual de usuario

Clifford

Clifford intellivoice IQ Vechicle Security Manual de usuario

Clifford

Clifford ACE 7500 Manual de usuario

Manuales populares de Alarma de coche de otras marcas

Ultra Start

Ultra Start 2500M SERIES Manual de usuario

Ultra Start

Ultra Start 650 Series Manual de usuario

Audiovox

Audiovox Prestige Platinum+ APS-511C Manual de usuario

Sparkrite

Sparkrite SRA8 Manual de usuario

Viper

Viper 4708V Manual de usuario

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manual

Falcon

Falcon Predator XL3 Guía del usuario

Audiovox

Audiovox Auto Security XR91 Instrucciones de funcionamiento

CrimeStopper

CrimeStopper CS-8717 Guía de inicio rápido

Ultra Start

Ultra Start 450 SERIES Manual de usuario

Scytek electronic

Scytek electronic Vectra X3 Manual de usuario

Excalibur

Excalibur AL-1860-EDPB Manual de usuario

Gemini

Gemini 7057 Manual de usuario

FlashLogic

FlashLogic FLRSBA PRESTIGE Manual de usuario

Magicar

Magicar FAI-440 Manual de usuario

Viper

Viper 560XV Manual de usuario

SECO-LARM

SECO-LARM 300C Manual de usuario

Python

Python 660XP Manual de usuario