The multilevel back plate can be adjusted to dierent
heights to target dierent parts of your body.
Open the sauna door and stabilise the door with your
foot by exing the foot upwards. When lining up the
xture to the mounting pins, look for the reection in
the glass door to help with proper alignment
Once both pins are in position over the large opening,
soly slide down the unit making sure both pins have
engaged in the back plate and are well engaged.
There may be slight friction from the stand-o feet on
the back of the unit, which is normal. This is intentional
to provide a snug t to avoid raling or movement of
the unit when opening the sauna door.
7
Installation Instruction
2 / Aaching the Clearlight® Red Light Tower unit to the Door Mounting Kit.
With a rm grip, grab the centre of the unit between both pins and slowly move in an upward motion
Slide upward until there is no longer any friction between the door and the stand-o feet, and the unit
releases from the pins. Then pull straight out from the door. Move the unit to the desired height, and
repeat the process above, or completely remove the unit from the door.
3/ Removal and height adjustment of the unit
The plug is specially designed to be used in your
Clearlight® Sauna model. If not using the unit inside the
sauna, there are adapter cords available to plug into all
other household power outlets
Plug the unit into the available plug inside your sauna.
It will either be located in oor near the front of your sauna,
or on the inside front wall of the sauna.
4/ Plugging in the Unit
1
2
| 6
