Clearaudio Master Innovation Black Manual de usuario
User manual
© clearaudio
electronic GmbH, 2018/05 Made in Germany
Upgrade Innovation to
Master Innovation
Master Innovation Black
Picture with:
Clearaudio tonearm „Universal“
and clearaudio cartridge
„Goldnger Statement“.
Master Innovation Wood
Picutre with:
Clearaudio tonearm „TT1 MI“
and Clearaudio cartridge
„Goldnge Statement“.
User manual
2 © clearaudio electronic GmbH, 2018/05
Dear Clearaudio customer,
Congratulations to your choice to upgrade your
Innovation
to a
Master Innovation
turntable, a world
class turntable, handmade in Germany by Clearaudio electronic GmbH.
Like the model
Innovation
the
Master Innovation
has a resonance minimizing chassis construction in
a sandwich combination with the innovative motor unit (low noise level and high turning moments),
which guarantees total isolation of resonances from the turntable chassis, providing the best music
reproduction and authentic High End imaging.
The Clearaudio patented CMB-Bearing-Technology, an inverted bearing with jewelled and polished
ceramic bearing shaft and a bronzed liner, provides frictionless analogue enjoyment.
This user manual described the reconstruction from the turntable
Innovation
to the turntable
Master Innovation
.
For more information regarding the
Master Innovation
you will get a separate user manual.
We wish you a lot of musical enjoyments with your new Clearaudio
Master Innovation
turntable.
Clearaudio electronic GmbH
This section must be read before any connection is made to the mains supply.
WARNING
Do not expose your turntable to rain or humidity.
Do not handle mains leads with wet hands.
No naked ame sources, such as lighted candles, should be placed on the equipment.
CE-MARKING
EQUIPMENT MAINS POWER SETTING
Your Clearaudio product has been prepared to comply with the household power and safety requirements
that exist in your area. This product can be connected to 230 V or 110 V AC (50 Hz and 60 Hz).
COPYRIGHT
Recording and reproduction of any audio material may require the consent of the creator.
Please note relevant information given in the following:
- Copyright Act 1956
- Dramatic and Musical Performers Act 1958
- Performers Protection Acts 1963 and 1972
- Any relevant recent legal regulations.
The Clearaudio
Master Innovation
meets the regulations concerning electromagnetic
disturbance (EMC) and low-voltage appliances.
User manual
Made in Germany 3
Contents
1. Packing overview ................................................................... 4
2. List of components ................................................................. 5
3. Reconstruction Innovation to Master Innovation .................. 6 - 16
4. Fine adjustment of the motor ................................................. 16
5. Special notes ........................................................................... 17
6. Technical data ......................................................................... 18
Warranty – information .............................................................. 19
User manual
4 © clearaudio electronic GmbH, 2018/05
1. Packing overview
Pic. 1: Packing overview
Box 1 of 2:
Drive unit,
already pre-mounted at
factory, accessories
Box 2 of 2:
Stainless steel platter,
drive platter
(38 mm)
User manual
Made in Germany 5
2. List of components
Clearaudio’s special secure packaging for your
Master Innovation
turntable ensures safe
transportation. Please keep this original packaging, in case you need to transport or ship the
turntable at any point in the future.
Clearaudio
Master Innovation
components list:
Pic. 2: List of components
12
34
5
1. First drive unit, pre-mounted
(Box 1 of 2) 4. Drive bearing
2. Stainless steel sub-platter
(Box 2 of 2) 5. Accessoires:
Pulley, white gloves, 2x drive belts, hex
wrench (#8), bearing oil, user manual,
QCQ-Card, warranty card
3. Platter with magnets (28mm)
(Box 2 of 2)
User manual
6 © clearaudio electronic GmbH, 2018/05
3. Reconstruction Innovation to Master Innovation
The reconstruction of the turntable
Innovation
to
Master Innovation
is easy as most parts of the
turntable chassis are already pre-assembled and has been tested at the factory.
Please use the enclosed white gloves in order to avoid scratches or unwanted ngerprints on the
turntable parts or platters.
After the reconstruction the
Master Innovation
turntable requires a space for setup of at least
(in inch): 18.9 x 19.3.
18.90 inches
480 mm
19.29 inches / 490 mm
Pic. 3: Required setup space (with Clearaudio tonearm
Unify
)
User manual
Made in Germany 7
Before you can start to reconstruct the
Innovation
turntable to the
Master Innovation
please pay
attention that all bases of the
Innovation
turntable have the height of 40 mm!
If one of your bases has not the height of 40 mm, please contact the dealer, where you have
purchased your
Innovation
turntable.
1.)
Take o the tonearm base and the blind screw on the other base at your
Innovation
turntable
(as shown in Pic. 4).
Pic. 4:
Innovation
turntable backside
2.)
In the next step take o carefully the drive platter of your
Innovation
. Please keep all platters with
you, as you need the platters again for the upgrade to the
Master Innovation
.
Pic. 5: Taking o the drive platter
User manual
8 © clearaudio electronic GmbH, 2018/05
3.)
Now remove carefully the stainless steel platter with the mounting clip
(accessory of
Innovation
turntable).
Avoid major side forces to avoid any damages to the ceramic bearing!
4.)
Next please remove the bearing of your
Innovation
. For that unscrew carefully the screw on the
lower side of the turntable and pull the bearing out of the chassis.
Pic. 6: Taking o the stainless steel platter
Screw on the lower side
Pic. 7: Removing the bearing
User manual
Made in Germany 9
5.)
Take out the delivered drive bearing for the
Master Innovation
.
Please remove carefully any protective security tape from the bearing.
Now you can put the new bearing into the chassis (see pic. 6) and arm the bearing with the
delivered screw on the lower side of the turntable.
Pic. 8: Setup of the drive bearing
6.)
Now please exchange the pulley of the
Innovation
turntable with the delivered pulley.
Pulley
Innovation
Pic. 9: Exchange of the pulleys
User manual
10 © clearaudio electronic GmbH, 2018/05
Please pay attention that the exchanged
Master Innovation
pulley is ush mounted with the axis of
the motor.
Pic. 10: Setup of the
Master Innovation
pulley
Now the upgrade from the
Innovation
to the
Master Innovation
is completed and you can switch
over to the setup of the
Master Innovation
.
In the user manual for the
Master Innovation
you will nd the packing list, packing overview and of
course the whole description for the setup of the
Master Innovation
.
To make it easier for you, you can also go ahead with the following description:
7.)
In the next step remove carefully the lamination of the sensor on the upper surface of the turntable
chassis.
Please remove the lamination extreme carefully and avoid any soiling and scratches.
Take the stainless steel sub-platter again carefully with both hands and put it onto the bearing.
The lower side must show to the bearing. Through a lightly (!!) up and down movement the platter
will slip onto the bearing upper part
(Pic. 11 and 12).
Please remove the lamination extreme carefully and avoid any soiling and scratches.
Pulley for
Master Innovation
Distance is approx. 1,2 mm
Pic. 11: Setup of the sub platter Pic. 12: Setupf of the sub platter
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Placa giratoria de Clearaudio
Clearaudio
Clearaudio Emotion CMB Upgrade Kit Manual de usuario
Clearaudio
Clearaudio Perfomance SE Manual de usuario
Clearaudio
Clearaudio concept wood Manual de usuario
Clearaudio
Clearaudio Emotion SE Manual de usuario
Clearaudio
Clearaudio Peerformance Manual de usuario
Clearaudio
Clearaudio Concept Manual de usuario
Clearaudio
Clearaudio Master Innovation Series Manual de usuario
Clearaudio
Clearaudio Universal Manual de usuario
Clearaudio
Clearaudio double matrix professional SONIC Manual de usuario
Clearaudio
Clearaudio Pulley extractor device Manual de usuario
Clearaudio
Clearaudio Master Innovation Manual de usuario
Clearaudio
Clearaudio Double Matrix Professional Manual de usuario
Clearaudio
Clearaudio concept Signature Manual de usuario
Clearaudio
Clearaudio Charisma V2.1 MM Manual de usuario
Clearaudio
Clearaudio Stroboscope Testrecord Manual de usuario
Clearaudio
Clearaudio Statement TT1 Manual de usuario
Clearaudio
Clearaudio Satisfy Kardan Manual de usuario
Clearaudio
Clearaudio Statement TT1 Manual de usuario
Clearaudio
Clearaudio Master Innovation Manual de usuario
Clearaudio
Clearaudio Performance SE Manual de usuario
