Clearaudio Statement V2 Manual de usuario
User manual
© clearaudio electronic GmbH, 2022-11 Made in Germany
Statement V2
Pic. similar
User manual
Page 2 © clearaudio electronic GmbH, 2022-11
Dear Clearaudio customer,
Congratulations on your purchase of the
Statement
V2
turntable.
You have purchased a state-of-the-art turntable, the
Statement V2
, a world class product from
Clearaudio electronic GmbH.
The special resonance-optimised construction, the external motor-unit and the patented Clearaudio
-
CMB
-bearing-technology guarantees absolute speed stability, pure pleasure in listening and
reproduction absolutely faithful to the original.
Thank you very much your condence.
Please read this user manual carefully to ensure that your
Statement
V2
turntable is correctly
installed ready to take you to a new dimension of music reproduction.
We hope you will enjoy your new Clearaudio
Statement
V2
turntable.
Clearaudio electronic GmbH
Please read the warning before connecting your
Statement
V2
turntable to the mains supply.
User manual
Made in Germany Page 3
Safety instructions
1. General information
Check the turntable for any damage before using it. Do not connect the turntable if damaged!
Never connect the turntable if it has been dropped or gotten wet, contact your dealer to have the turntable checked.
Never expose the turntable to rain or moisture.
Never touch the power cord of the device with wet hands.
Regular visual inspections for defective insulation on the connection cable are also recommended for your own safety.
A damaged cable should be replaced immediately by a specialist!
Never pull on the power cord to unplug the device. Always pull directly on the plug!
The inside of the turntable is maintenance free. Never open the case or attempt to repair the unit yourself, since this
can lead to loss of warranty!
We recommend disconnecting the power supply from the mains if you do not operate the device for a longer period of
time.
The turntable does not feature an automatic shut-o mechanism.
Therefore, as soon as the stylus has reached the run-out groove, engage the tonearm lift and switch the turntable o.
Not suitable for children! Scope of delivery may contain small parts that can be swallowed.
2. Intended use
The
Statement
is a turntable for playing records.
The intended use of the
Statement
in accordance with the information provided in the user manual only.
The power supply may only be operated with maximum permissible connection values according to the technical data.
Any other use or modication of this product is not intended.
3. Location of installation
Avoid locations with direct sunlight, temperature uctuations and high humidity.
Likewise, avoid placing electronic devices near heaters, heat lamps, or other devices that produce heat.
The device is designed for operation at room temperature.
No objects with an open ame may be placed on or near the device (burning candles or similar).
4. Overload
The product is designed to comply with all necessary safety regulations. However, you should not leave the device
unattended under extreme loads.
5. Maintenance
Never use agressive cleaning detergent.
Donotusedryclothsforcleaningasthisgeneratesstaticelectricity. Suitable cleaning and care products fromClearaudio
are available from www.analogshop.de or from specialist retailers.
The bearing of the turntable platter can be lubricated every 2 years with the oil provided.
Put 1 or 2 drops of the oil into the bearing for lubrication.
User manual
Page 4 © clearaudio electronic GmbH, 2022-11
6. Health information
Permanently high volume can lead to various types of hearing damage. Use high volume responsibly!
IMPORTANT!
Before it is fully assembled there are strong magnetic elds around the main bearing,
these could interfere with heart pacemakers and so the Statement V2 should not be
setup by anyone with a pacemaker.The
Statement V2
turntable is extremely heavy and
should not be assembled by anyone with back problems.
7. Service
The
Statement
turntable should be repaired during the guarantee period by the manufacturer only, otherwise the
warranty claim expires. All Clearaudio products should only be serviced by specialist retailers.
If, despite the high production standard, a service is necessary, the
Statement
turntable must be send to Clearaudio
through your dealer.
8. Transport
Use the original packing material for further transportation of the
Statement
turntable, otherwise serious damage could
occur.
Be sure to pack the device exactly as it was shipped.
Safe transport is only guaranteed in the original packaging.
Proceed in reverse as described for assembly when packing.
Always remove the turntable platter and replace the foam securing the sub-platter and cover the bearing with tape as
well. Otherwise serious damage can occur.
Remove also the pulley from the motor axle to avoid any damage during transport.
Clearaudio assumes no liability for any damage that may occur due to incorrect packing.
9. Disposal
Do not dispose this product together with other waste.
WEEE Reg. No.: DE26004446
10. CE Marking
This electronic product corresponds to the applicable guidelines for obtaining the CE mark.
User manual
Made in Germany Page 5
Contents
1. Packaging overview..........................................4 - 5
2. Construction overview......................................6
3. Setup and operation .........................................7 - 15
4. Motor adjustment .............................................16
5. Troubleshooting................................................17
6. Technical data ..................................................18
Warranty information ...........................................19 - 20
User manual
Page 6 © clearaudio electronic GmbH, 2022-11
1. Packaging overview
The
Statement V2
turntable is packed and delivered on either a Euro pallet or two half size Euro
pallets. The Packing is specially made for the
Statement V2
turntable and should be retained for any
repacking.
Please note:
The
Statement V2
turntable is very heavy and will require at least two people to unpack and setup.
Attention / Warning:
IMPORTANT!
Before it is fully assembled there are strong magnetic elds around the main bearing,
these could interfere with heart pacemakers and so the Statement V2 should not be
setup by anyone with a pacemaker.The
Statement V2
turntable is extremely heavy and
should not be assembled by anyone with back problems.
The two wooden boxes contain the turntable stand and the pendulum weights, as well as ve (5)
separately packed cartons containing all other parts (e.g. massive metal cross, acrylic chassis,
bearings etc).
Please check the accessories contents according to the following list before you setup the turntable.
1. Two pairs of white gloves 5. Three bases as counter weights (40mm)
2. Two belts 6. Four bases as at pads
3. Tool for adjustment of stainless steel discs
(pendulum weight)
7. Polishing paste
4. Three bases as counter weights (20mm) 8. A set of hex wrenches
1
65
432
8
7
User manual
Made in Germany Page 7
1312
11109
9. Bearing oil 13. Bubble level gauges
10. Acrylic cleaner 14. Not shown: Two wooden blocks
11. Screwdriver 15. Not shown: User manual
12. Statement clamp 16. Not shown: Warranty card, Clearaudio
certicate card (QCQ)
User manual
Page 8 © clearaudio electronic GmbH, 2022-11
2. Construction overview
Pic. 1: Construction overview
User manual
Made in Germany Page 9
3. Set up and operation
1.
Select the position in which you will use the
Statement V2
turntable. Place the
Statement V2
turntable base in this
position on the four supplied feet.
2.
Place the two wooden blocks beneath the
Statement V2
base as shown.
Pic. 2: Placing the
Statement
Pic. 3: Placing the
Statement
User manual
Page 10 © clearaudio electronic GmbH, 2022-11
IMPORTANT!
Being careful not to damage the bearing spindle on top of the pendulum shaft, assemble the
pendulum, starting by sliding a solid metal disc over the pendulum shaft so that it rests on the
wooden blocks. Be sure to place a felt mat between each metal disc, building the pendulum with
three solid discs at the bottom, then six half-cut-away discs, then two more solid discs, nally adding
the solid disc engraved with the words Clearaudio
Statement V2.
Pic. 4: Placing the discs
Disc engraved with
„Clearaudio
Statement
“
Disc, solid
(2 pcs.)
Disc, half cut away
(6 pcs.)
Disc, solid
(3 pcs.)
Place a felt mat in
between each stainless
steel platters
Please note:
If you are using the
Statement V2 TT1
tangential tonearm, position the half-cut-away discs with the
cut-away section at the rear of the turntable.
3.
Place the four cork damping plates on top of the four
corner pillars.
Place 4 pcs. damping
plates if not assembled
already from the factory
Please note:
Again, being careful not to damage the bearing spindle on
top of the pendulum shaft, lower the stainless steel cross
frame over the pendulum shaft so that is rests on the four
cork damping plates.
Pic. 5: Placing the cork damping plates
Otros manuales para Statement V2
1
Tabla de contenidos
Otros manuales de Placa giratoria de Clearaudio
Clearaudio
Clearaudio Bluemotion & Satisfy Manual de usuario
Clearaudio
Clearaudio concept active Manual de usuario
Clearaudio
Clearaudio concept wood Manual de usuario
Clearaudio
Clearaudio Charisma V2 MM Manual de usuario
Clearaudio
Clearaudio Emotion SE Manual de usuario
Clearaudio
Clearaudio Master Innovation Manual de usuario
Clearaudio
Clearaudio Master Innovation Manual de usuario
Clearaudio
Clearaudio Smart Matrix Manual de usuario
Clearaudio
Clearaudio Smart Matrix Manual de usuario
Clearaudio
Clearaudio Maximum Solution Manual de usuario
Clearaudio
Clearaudio Tracer Manual de usuario
Clearaudio
Clearaudio smart matrix SILENT Manual de usuario
Clearaudio
Clearaudio Emotion Start Smart Manual de usuario
Clearaudio
Clearaudio Turbo Weight Manual de usuario
Clearaudio
Clearaudio TT3 Manual de usuario
Clearaudio
Clearaudio Innovation Compact Manual de usuario
Clearaudio
Clearaudio Innovation Compact Manual de usuario
Clearaudio
Clearaudio Double Matrix Professional SONI C Manual de usuario
Clearaudio
Clearaudio Concept Manual de usuario
Clearaudio
Clearaudio double matrix professional SONIC Manual de usuario
