Clear One CONVERGE PRO 2 Manual de usuario
Touch Panel Controller for CONVERGE®Pro 2
Quick-Start Guide
INTRODUCTION ............................................................................ 3
COMPONENTS INCLUDED........................................................... 4
PROVIDING POWER ..................................................................... 5
PROVIDING COMMUNICATIONS ................................................. 5
POWER AND COMMUNICATION ACCESSORIES..................... 10
CONFIGURE DEVICE SETTINGS................................................ 11
Configure Wi-fiSettingS ............................................................... 11
Configure ethernet uSing DhCP................................................... 13
Configure ethernet uSing aStatiC iP............................................. 13
Set Date anD time .......................................................................... 14
CONNECT TO A CONVERGE PRO 2 .......................................... 18
MOUNTING OPTIONS ................................................................. 20
Clearone tabletoP mount Kit ....................................................... 20
Clearone Wall mount Kit ............................................................. 21
thirD-Party VeSa mount .............................................................. 21
mounting holeS............................................................................. 21
CLEARONE CONTACTS.............................................................. 22
Quick-Start Guide
3
INTRODUCTION
Congratulations on your purchase of a ClearOne Touch Panel Controlerr
for the CONVERGE®Pro 2.
The Touch Panel Controller is a highly intuitive 10-inch, touch-screen
device that allows users to control their audio conference, including
managing contacts and placing and controlling calls. Flexible connectiv-
ity options and a choice of tabletop, wall, or VESA mounting options offer
an integrator-friendly solution that fits perfectly in any space.
Features include:
• 10.1” capacitive touch screen, 1280 x 800 resolution
• On-screen dialpad
• Make & receive calls
• Multi-party conference calls
• Ability to put calls on hold and transfer and forward calls
• Call history
• Phone book
• Favorites
• Microphone and speaker mute and volume controls
• Flexible mounting options
TOUCH PANEL CONTROLLER
4
COMPONENTS INCLUDED
Touch Panel Controller
Wi-Fi antenna and
Dust Cap (for use
when the antenna is
not attached)
AC Power Adapter
Quick-Start Guide
5
PROVIDING POWER
There are three ways to provide power to the Touch Panel Controller:
• AC Power Adapter attached to the power connector at the bottom
of the device.
• Ethernet connected to an PoE injector or PoE-capable switch via
the RJ45 connector at the bottom of the device.
• Ethernet connected to a P-link-capable ClearOne device via the
RJ45 connector at the bottom of the device.
PROVIDING COMMUNICATIONS
In order for a Touch Panel Controller to work, it must be connected to a
CONVERGE Pro 2 (CP2) device. In order for the telephony-specific Dialer
functions to work, the Touch Panel Controller must be connected to a
CONVERGE Pro 2 device that is either VoIP or Telco capable.
There are four ways to provide communications between the Touch Panel
Controller and a CP2:
TOUCH PANEL CONTROLLER
6
By serial connection, using the DB9 RS232 port to connect the Touch
Panel Controller directly to a CP2:
CONVERGE Pro 2
Touch Panel Controller
Legend
DB9 RS232
female to male cable
(50’, 100’, or 50’+100’)
Power Options:
A. Power Adapter
B. PoE Injector
C. PoE Ethernet
D. Power over P-link
Quick-Start Guide
7
By serial connection via a CP2 GPIO or USB Expander, using a serial
cable attached to the Phoenix Euroblock Adapter accessory:
Beamforming Mic Array 2
CONVERGE Pro 2
CP2 GPIO
Expander
Rear Panel
Touch Panel Controller
DB9 RS232
female to male cable
(50’, 100’, or 50’+100’)
Phoenix Euroblock to
DB9 RS232 adapter
CAT6 Ethernet cable
(50’, 100’, 150’, or 200’)
Legend
P-link
P-link
Power Options:
A. Power Adapter
B. PoE Injector
C. PoE Ethernet
D. Power over P-link
TOUCH PANEL CONTROLLER
8
By Wi-Fi connection:
Network Switch
Touch Panel Controller
CONVERGE Pro 2
Wi-Fi Router
CAT6 Ethernet cable
(50’, 100’, 150’, or 200’)
Legend
Power Options:
A. Power Adapter
B. PoE Injector
C. PoE Ethernet
D. Power over P-link
NOTE: If you connect the device by both Ethernet and Wi-Fi, the Ethernet connection
takes precedence over the Wi-Fi connection.
Quick-Start Guide
9
By Ethernet connection, by attaching a CAT5e or CAT6 cable to the RJ45
port at the bottom of the device:
CONVERGE Pro 2
PoE-capable Network Switch
Touch Panel Controller
Power Options (if not using a PoE-
capable Switch):
A. Power Adapter
B. PoE Injector
C. Power over P-link
CAT6 Ethernet cable
(50’, 100’, 150’, or 200’)
Legend
TOUCH PANEL CONTROLLER
10
POWER AND COMMUNICATION ACCESSORIES
Following is a list of ClearOne power/communications accessories:
Accessory Part No. Description
Serial Cable,
50 ft. (15.2m)
910-3200-504-50 DB9 RS232 serial cable with male connector on
one end and female connector on the other end.
Serial Cable,
100 ft. (30.5m)
910-3200-504-100 DB9 RS232 serial cable with male connector on
one end and female connector on the other end.
Serial to Phoenix
Euroblock Adapter,
1 ft. (30.5cm)
910-3200-505 Cable with DB9 RS232 serial female connector
on one end and Phoenix Euroblock connector on
the other end.
PoE Power Supply
kit for 3 devices
910-3200-202 PoE injector power supply kit for powering up to
three devices attached via P-link cables.
PoE Power Supply
kit for 1 device
910-001-004 PoE injector power supply kit for powering one
device attached via P-link cable.
CAT6 Ethernet
Cable, 50 ft. (15.2m)
910-3200-204-50 CAT6 Ethernet cable.
CAT6 Ethernet
Cable, 100 ft.
(30.5m)
910-3200-204-100 CAT6 Ethernet cable.
CAT6 Ethernet
Cable, 150 ft.
(45.7m)
910-3200-204-150 CAT6 Ethernet cable.
CAT6 Ethernet
Cable, 200 ft. (61m)
910-3200-204-200 CAT6 Ethernet cable.
NOTE: For detailed examples of combining power and communications, see the Touch
Panel Controller for CONVERGE Pro 2 User Manual.
Otros manuales para CONVERGE PRO 2
5
Tabla de contenidos
Otros manuales de Controladores de Clear One
