Clarke CPPRSS Manual de usuario

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MODEL NO: CPPRSS

PART NO:

PART NO: 6499630

CHEMICAL PLUNGER PUMP

INTRODUCTION

Thank you for purchasing this CLARKE chemical plunger pump,

Suitable for water, alcohol, petroleum, diesel, paraffin, lubricant, water-based chemicals, acid and alkaline solutions.

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

LIST OF CONTENTS

ASSEMBLY

•1xPump •1xOutlettube

• 1 x Handle assembly • 1 x Extension Inlet tube

• 2 x Nuts and Bolts • 1 x 2 piece telescopic extension with filter

FITTING THE OUTLET TUBE

1. Remove the nut from the pump as shown. 2. Place the nut over the outlet tube and back

onto the pump

FITTING THE HANDLE ASSEMBLY FITTING THE TELESCOPIC EXTENSION TUBE

1. Connect the handle as shown and secure at

each point using the small nuts and bolts.

1. Fit the telescopic extension with filter together

as shown

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

FITTING THE PUMP TO A BARREL

1. Fit the telescopic extension with filter to the pump.

• You can fit the extension inlet tube in between if

required.

2. Adjust the telescopic extension tube to the required length.

• The bottom of the telescopic extension should be just off

of the bottom of the barrel when fitted.

3. Screw the pump into the threaded opening of the barrel.

USING THE PUMP

1. Place a suitable container under the outlet tube.

2. Pump the handle to draw fluid from the barrel.

• The first time you use the pump, you may need to pump

the handle a few times to prime the pump.

• Each ‘pump’ of the handle will draw approximately 0.3L

of fluid.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

Container Adaptor Size 2" BSP

Max Flow 0.3 litres per stroke

Inlet Tube Length 300 mm

Inlet Tube Diameter 21.5mm

Outlet Tube Diameter 16.7mm

Maximum Drum Size 205 litres

Min-Max Height (with extension tube fitted) 1130 - 1400 mm

Dims (W x D x H) 485 x 90 x 1400 mm (fully extended)

Product Weight 1.2kg

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bomba de agua de Clarke

Clarke

Clarke C10 Manual

Clarke

Clarke IVP13A Manual de instalación y operación

Clarke

Clarke Strong Arm CS10PRH Manual de instalación y operación

Clarke

Clarke CBM100SS Manual de instalación y operación

Clarke

Clarke CU150 Manual de instalación y operación

Clarke

Clarke PW50 Manual de instrucciones

Clarke

Clarke CPE Series Manual de instrucciones

Clarke

Clarke CPRP560 Manual de instrucciones

Clarke

Clarke ISP10A Manual de instalación y operación

Clarke

Clarke CVPS Guía rápida

Clarke

Clarke HIPPO Jr Manual de instalación y operación

Clarke

Clarke HSE RANGE Manual de instrucciones

Clarke

Clarke SUBMERSIBLE PUMP Manual de instrucciones

Clarke

Clarke CPE20A1 Manual de instrucciones

Clarke

Clarke DFT12 Manual de instrucciones

Clarke

Clarke PS75A Manual de instrucciones

Clarke

Clarke SWP900A Manual de instrucciones

Clarke

Clarke DWP100A Manual de instrucciones

Clarke

Clarke CSE400A Manual de instalación y operación

Clarke

Clarke CVPW Guía rápida

Clarke

Clarke BIP1500 Manual de instrucciones

Clarke

Clarke CM1 Manual de instalación y operación

Clarke

Clarke PS75 Manual de instrucciones

Clarke

Clarke CSV4A Manual de instrucciones

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario