Clarke Air 25C Manual de instalación y operación

Long NozzleBlow Gun

Model : 25C

Part No : 3090155

OPERATING & MAINTENANCE

INSTRUCTIONS

0303

WARNING

Compressed air can be

dangerous. Ensure that you are

thoroughly familiar with all

precautions relating to the use

of compressors and

compressed air supply.

Please read these instructions carefully before operating the tool

Thank you for purchasing this CLARKE Long Nozzle Blow Gun

Before using the device, please read this manual thoroughly and carefully

follow all instructions given. This is for your own safety and that of others

around you, and is also to help you achieve long and trouble free service

from your new blow gun.

This simple to operate trigger action

blow gun can be used to blow away

dust and wood shavings as well as metal

filings and swarf.

Take great care when using this

appliance... DO NOT use high air

pressure when cleaning dust from

electrical or electronic components.

Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change

specifications at any time without prior notice.

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture

for a period of 12 months from the date of purchase. Please keep

your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been

abused or tampered with in any way, or not used for the pur-

pose for which it was intended.

Faulty goods should be returned to their place of purchase, no

product can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Accessories

A wide range of airline accessories is available from your nearest CLARKE dealer, for further information, contact your nearest dealer, or telephone

CLARKE International Sales department on 01992 565300.

PARTS & SERVICE TEL: 020 8988 7400

or e-mail as follows:

PARTS: [email protected]

SERVICE: [email protected]

Maintenance

IMPORTANT

Disconnect the gun from the air supply,

and relieve any pressure in the gun and

hose, before any disassembly.

The only maintenance other than to replace

worn or broken parts, is to keep the gun

clean and lubricated.

Occasionally clean the gun and lubricate

all moving parts, especially the trigger stud.

Inspect the gun and air hose for wear or

damage periodically, and replace if

necessary.

DO NOT use damaged or leaking hoses.

ALWAYS wear a suitable approved breathing mask, to protect against inhalation

of dust or fumes.

ALWAYS wear approved impact resistant safety goggles. Eye glasses are NOT

safety glasses.

ALWAYS disconnect the gun from the air supply when it is not in use, and before any

disassembly.

NEVER point gun towards people or animals. In the case of injury, seek expert

medical advice immediately.

NEVER allow children to use or play with this appliance.

SAFETY PRECAUTIONS

For your personal safety and that of others around you. Follow these

safety instructions carefully.

Blow guns should only be connected to an

airline precedded by a pre-set tamper-

proof pressure regulator set at a reduced

pressure from the normal 80 psi airline

supply.

If in any doubt, please contact your

nearest Clarke service department.

The air supply should be completely cllean

and dry.

Lubricators of any kind should not be used

with blow guns.

WARNING

Specifications

Model: ...................................... 25C

Part No: .................................... 3090155

Air Inlet Connector: ................ ¼”BSP

Minimum Compressor Size: .... 0.65HP

WARNING

Compressed air can be

dangerous. Ensure that you are

thoroughly familiar with all

precautions relating to the use of

compressors and compressed air

supply.

Este manual sirve para los siguientes modelos

Otros manuales de Herramientas eléctricas de Clarke

Clarke

Clarke CHG2000B Manual de usuario

Clarke

Clarke CMFTLi Manual de instrucciones

Clarke

Clarke CIR18LiC Manual de instalación y operación

Clarke

Clarke CSG1C Manual de instrucciones

Clarke

Clarke Air CAT149 Manual de instalación y operación

Clarke

Clarke CAT108 Manual de instalación y operación

Clarke

Clarke Strong-Arm AHP 26 Manual de instrucciones

Clarke

Clarke CBS16 Manual de instrucciones

Clarke

Clarke CPSB1 Manual de instrucciones

Clarke

Clarke Strong-Arm CSA30FPB Manual de instrucciones

Clarke

Clarke PSW1 Manual de usuario

Clarke

Clarke 6505512 Manual de instrucciones

Clarke

Clarke CDP10B Manual de instalación y operación

Clarke

Clarke CMFT250 Manual de instalación y operación

Clarke

Clarke X-Pro CAT202 Manual de instalación y operación

Clarke

Clarke CHT259 Manual de instrucciones

Clarke

Clarke CDP10B Manual de instrucciones

Clarke

Clarke CTC150LI Manual de instrucciones

Clarke

Clarke ECSS2 Manual de instrucciones

Clarke

Clarke CHT 459 Manual de usuario

Clarke

Clarke CSA20FBT Manual de instrucciones

Clarke

Clarke CWS200 Manual de instrucciones

Clarke

Clarke CONTRACTOR CON800 Manual de instalación y operación

Clarke

Clarke CBS43 Manual de instrucciones

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual