Cisco WAP131 Manual de usuario

Reboot and Reset Factory Default Settings on

the WAP131

Objective

The factory default reset erases all configuration settings that have been modified by the

user, and restores the device to its original settings. This may be helpful if you lose the

password to a device and wish to regain access.

Performing a reboot restarts the device with a saved configuration.

The objective of this article is to show you how to reset to factory default settings and how to

reboot a WAP131 Wireless Access Point.

Note: It is advised to save a backup copy of the configuration before beginning this process.

Refer to Download and Backup Configuration Files on the WAP131 and WAP351 for

additional information.

Applicable Devices

• WAP131

Software Version

• 1.0.0.39

Reset to Factory Default

There are two ways to reset the Access Point to the factory default configuration:

• Hardware reset

• Reset with the use of the web configuration utility

Hardware Reset

Step 1. Press and hold the Reset button located at the back of the device for approximately

ten seconds with a pin.

The Access Point reloads and is set to the default configuration settings.

Step 2. Login with the default credentials. The default username is cisco, and the default

password is cisco.

Reset with the use of the Web Configuration Utility

Step 1. Log in to the web configuration utility and choose Administration > Reboot. The

Reboot page opens:

Step 2. To reset the device, click the Reboot To Factory Default button.

A Confirm page appears:

Step 3. Click OK.

A Progress Bar appears:

Step 4. After the reboot is completed, login with the default credentials. The default

username is cisco, and the default password is cisco.

Rebooting the Device

There are two ways to reboot the Access Point:

• Hardware reboot

• Reboot with the use of the web configuration utility

Hardware Reboot

Step 1. Press the Power button to turn off the device. After 10 seconds have passed, press

the Power button a second time to power the device back on. The Access Point reboots and

is refreshed.

Note: The power button will not have any affect if the WAP is being powered with PoE

(Power over Ethernet).

Reboot with the use of the Web-based utility

Step 1. Log in to the web configuration utility and choose Administration > Reboot. The

Reboot page opens:

Step 2. To reboot the device, click the Reboot button.

A Confirm page appears:

Step 3. Click OK to continue with reboot.

A Progress Bar appears:

Step 4. The Login page appears. Login with the saved administration credentials.

Otros manuales para WAP131

3

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Cisco

Cisco

Cisco 1522AG - Aironet Lightweight Outdoor Mesh Access... Manual de usuario

Cisco

Cisco Meraki MR84 Manual

Cisco

Cisco 1552S Manual de usuario

Cisco

Cisco Aironet 1815i Manual de usuario

Cisco

Cisco Aironet 1810W Series Manual de usuario

Cisco

Cisco AT&T U-VERSE VEN401 Manual de usuario

Cisco

Cisco Aironet 1200 Series Manual de instalación y operación

Cisco

Cisco Aironet 1550 Series Manual de usuario

Cisco

Cisco Aironet 521 Manual de usuario

Cisco

Cisco AIR-MP20B Manual de usuario

Cisco

Cisco WAP121 Manual de usuario

Cisco

Cisco AIR-CAP1552H-x-K9 Manual de usuario

Cisco

Cisco AIR-AP1832I K9C Series Manual de usuario

Cisco

Cisco Aironet 1572EC Guía de referencia rápida

Cisco

Cisco Aironet 1240AG Series Manual

Cisco

Cisco Digistar EoC Manual de usuario

Cisco

Cisco Catalyst IW6300 Series Manual de usuario

Cisco

Cisco AIR-AP1131G-A-K9 Manual de usuario

Cisco

Cisco Aironet 1700 Guía de referencia rápida

Cisco

Cisco 1130AG - Aironet - Wireless Access Point Manual

Cisco

Cisco Aironet 3700 Series Guía de referencia rápida

Cisco

Cisco Meraki MR56 Manual de usuario

Cisco

Cisco Linksys Wireless-G WBP54GV2 Manual de usuario

Cisco

Cisco Meraki MR76 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario