Cisco UCS 5100 Manual de usuario

Auto Upgrade Blade Firmware Revision in UCS

Environment

Document ID: 110341

Contents

Introduction

Prerequisites

Requirements

Components Used

Network Diagram

Conventions

Main Task

Create Service Profile for Autoconfig Policies

Create Autoconfig Policies

Verify

Troubleshoot

Related Information

Introduction

Cisco Unified Computing System (UCS) has the concept of an automatic policy called Autoconfiguration

Policies. This policy is applied to any new blade that is installed in the UCS system. This policy is to allow

you to upgrade blades to your desired firmware revisions automatically, which eliminates the need to worry

that new or replaced hardware will need to be upgraded or downgraded to meet organizational needs.

This document illustrates how this is done by:

Creating a Service Profile• Creating Autoconfiguration Policies and add these Autoconfiguration Policies to the Service Profile

created

•

Prerequisites

Requirements

Cisco recommends that you have a working knowledge of the Cisco UCS hardware and software.

Components Used

The information in this document is based on Cisco UCS.

The information in this document was created from the devices in a specific lab environment. All of the

devices used in this document started with a default configuration. If your network is live, make sure that you

understand the potential impact of any command.

Network Diagram

A typical Cisco UCS topology looks like this:

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Main Task

Create Service Profile for Autoconfig Policies

Perform these steps:

In the navigation pane, select the Servers tab.1. Right−click Service Profile Template and select Create Service Profile.2.

Fill out the Name and Description in the Create Service Profile Template pop−up window.3.

Click Next.4.

If needed, assign any Storage and Networking to this Service Profile.5. Click Next.6.

If needed, assign Server Boot Order to this Service Profile.7. Click Next.8.

In Server Assignment, choose the Host firmware and Managament firmware to be applied to the

blades.

Click Next.10.

Click Finish.11.

Create Autoconfig Policies

After you have created the Service Profile, the next task is to create the Autoconfig Policies to apply to this

Service Profile. Perform these steps:

Log in to Cisco UCS Manager.1. In the navigation pane, select the Equipment tab.2. Select the Policies tab in the work pane.3. Select Autoconfig Policies.4. Click +.

The Create Autoconfiguration Policy window pops up.

Fill in the required fields within the Create Autoconfiguration Policy pop−up window.6. Make sure you tie this Autoconfiguration Policy to the Service Profile you have created.7. Click OK.8.

Verify

All new UCS Blades inserted into the UCS will automatically get associated to the Autoconfiguration Policy.

UCS will upgrade all firmware on the newly inserted blade to what was defined in the firmware policies.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

Cisco Systems, Inc.

Updated: Jul 20, 2009 Document ID: 110341

Otros manuales para UCS 5100

Tabla de contenidos

Otros manuales de Servidor de Cisco

Cisco

Cisco UCS X9508 Manual de usuario

Cisco

Cisco UCS B200 M4 Manual

Cisco

Cisco UCS C220 Instrucciones de instalación y mantenimiento

Cisco

Cisco TelePresence Manual de servicio

Cisco

Cisco UCS B440 M2 Manual de usuario

Cisco

Cisco UCS C24 Instrucciones de instalación y mantenimiento

Cisco

Cisco ISE-3315 Manual de usuario

Cisco

Cisco UCS B440-M1 Guía rápida

Cisco

Cisco C880 M5 Manual de usuario

Cisco

Cisco UCS B420 M4 Manual

Cisco

Cisco UCS B Series Manual de instalación y operación

Cisco

Cisco C460 M4 Manual de usuario

Cisco

Cisco C880 M4 Manual de usuario

Cisco

Cisco Meraki MX65 Manual de usuario

Cisco

Cisco CSACS-1121-K9 Manual de usuario

Cisco

Cisco SFS 7008P Instrucciones de funcionamiento y mantenimiento

Cisco

Cisco TD 92322GB Manual de usuario

Cisco

Cisco UCS C22 M3 Manual de usuario

Cisco

Cisco 7835-H2 - Media Convergence Server Manual de usuario

Cisco

Cisco TelePresence Server 7010 Manual de usuario

Cisco

Cisco UCS C3160 Instrucciones de instalación y mantenimiento

Cisco

Cisco Content Delivery Engine CDE100 Manual

Cisco

Cisco expressway ce1100 Manual de usuario

Cisco

Cisco UCS 5108 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario