Cisco B200 M3 Manual de usuario

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco B200 M3 Blade Server

Statement of Volatility

Publication Date: November 19, 2013

The Cisco B200 M3 blade server has multiple serial, electrically erasable, and programmable nonvolatile

memory components (EEPROM and Flash memory) that are used to store manufacturing hardware

identification and hardware configuration information. The majority of serial EEPROMs and flash

memories are not written by users and contain no customer information. Procedures for clearing the few

flash devices that can retain customer data are included in this document.

•Restoring the BIOS to the Factory Default Settings

•Restoring the LSI SAS Controller to the Factory Default Settings

•Restoring the CIMC to the Factory Default Settings

•Resetting the CMOS From UCS Manager

Restoring the BIOS to the Factory Default Settings

Use the following procedure to restore the BIOS to the factory default settings through the UCS Manager

remote KVM or a local KVM I/O cable that is connected directly to the blade server.

Step 1 Press F2 to access the BIOS setup.

Step 2 Click the Save and Exit tab.

Step 3 On the Save and Exit tab, click Load Default Values.

Step 4 Click Yes.

Step 5 Click Save and Exit or press F10.

Step 6 Click Yes to reboot the blade server.

Cisco B200 M3 Blade Server Statement of Volatility

Restoring the LSI SAS Controller to the Factory Default Settings

Use the following procedure to restore the LSI SAS controller to the factory default settings through the

UCS Manager remote KVM or a local KVM I/O cable that is connected directly to the blade server.

Step 1 Press Ctrl-H to log on to the web GUI.

Step 2 Click Start.

Step 3 Click the Controller Properties tab.

Step 4 Click Next.

Step 5 Click Set Factory Defaults.

Step 6 Click Yes.

Step 7 Click Submit.

Step 8 Press Ctrl-Alt-Delete to reboot the blade server.

Restoring the CIMC to the Factory Default Settings

Use the following procedure to restore the Cisco Integrated Management Controller (CIMC) to the

factory default settings.

Step 1 Shut down the blade server to power it down.

Step 2 Remove the blade server from the chassis for 30 seconds or longer to turn off the standby power.

Step 3 Insert the blade server back into the chassis to power it on, which will automatically reboot the CIMC

and restore it to its factory default settings.

Resetting the CMOS From UCS Manager

Use the following procedure to reset the CMOS from UCS Manager.

Step 1 In the UCS Manager navigation window, click the Equipment tab.

Step 2 On the Equipment tab, choose Equipment > Chassis > Chassis Number > Servers.

Step 3 Choose the server on which you want to reset the CMOS.

Step 4 In the Work pane, click the General tab.

Step 5 In the Actions area, click Recover Server.

Step 6 In the Recover Server dialog box, click Reset CMOS and then click OK.

Tabla de contenidos

Otros manuales de Servidor de Cisco

Cisco

Cisco UCS M3 Series Manual de usuario

Cisco

Cisco Catalyst 6800 Manual de usuario

Cisco

Cisco TelePresence Manual de usuario

Cisco

Cisco TelePresence Manual de servicio

Cisco

Cisco Firepower 1120 Manual de usuario

Cisco

Cisco UCS C250 Instrucciones de instalación y mantenimiento

Cisco

Cisco AS5200 - Universal Access Server Manual de usuario

Cisco

Cisco UCS C480 M5 Instrucciones de montaje

Cisco

Cisco UCS B200 M4 Manual de instalación y operación

Cisco

Cisco ONS 15454 SDH Manual de usuario

Cisco

Cisco UCS C3160 Instrucciones de instalación y mantenimiento

Cisco

Cisco AS5800 Manual de usuario

Cisco

Cisco UCS B200 M2 Manual de usuario

Cisco

Cisco TelePresence Server 7010 Manual de usuario

Cisco

Cisco UCS C24 M3 Manual de usuario

Cisco

Cisco UCS 5100 Manual de usuario

Cisco

Cisco MSE 3365 Manual de usuario

Cisco

Cisco UCS C210 M2 Manual del sistema

Cisco

Cisco N20-B6625-1 Manual del sistema

Cisco

Cisco AS5200-PWR-AC Manual de lista de piezas

Cisco

Cisco S195 Manual de usuario

Cisco

Cisco Content Delivery Engine CDE100 Manual

Cisco

Cisco UCS X9508 Guía de inicio rápido

Cisco

Cisco UCS C210 Instrucciones de instalación y mantenimiento

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario