Cisco C460 M4 Manual de usuario

Contents

Introduction

Problem

Potentially Impacted Systems:

Customer Visibility / Impact:

Solution

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Work Around 2 - Resetting to Factory Defaults via IMC CLI

Introduction

The intent of this document is to address the issue seen regarding Trusted Platform Module (TPM)

related System Event Logs (SEL) events on some C460 M4 servers. A small number of C460 M4

SPARE servers will see a critical SEL event related to TPM presence right out of the factory. The

instructions below will assist you in resolving servers impacted by this issue.

Problem

Potentially Impacted Systems:

About 614 SPARE C460 M4 Systems (Shipped between June 2nd 2014, and April 13th 2016.)

Customer Visibility / Impact:

Customers may see a critical SEL event similar to the one below on servers received from the

factory.

There is NO operational impact to the server, but the message may lead to unessary concern

resulting in a call to TAC. This has to do with the way TPMs were handeled in manufacturing.

C460 M4 systems keep a "Cached" value for TPM presence, indicating if a TPM was was ever

installed in the server - every server has a TPM installed durring testing. The C460 M4 also tracks

the current precense of the TPM, and since all servers ordered as spares ship without a TPM, the

system triggers an alarm thinking that the module that was once installed has been removed.

Solution

The work-arround below will allow you to quickly address this SEL event should you wish to

remove the messages. The work-arround involves resetting the Integrated Management Controller

(IMC) to factory default settings, clearing any cached TPM Presence value.

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Resting to Factory Defaults via IMC WebUI

Point a browser to the IMC IP, login, and navigate to the Admin --> Utilities tab1. Click the "Reset Cisco IMC to Factory Default Configuration" as shown in the image below.2.

3. You will be prompted with a pop up box. Click OK to proceed.

Note: The IMC will reset completely and you will need to reconfigure all settings. Please record

any information prior to the reset.

Work Around 2 - Resetting to Factory Defaults via IMC CLI

SSH to the IMC IP using the user's credentials.1. Type the following commands as shown below:2.

a. scope cimc

b. factory-default

3. Enter "y" to continue.

Note: The IMC will reset completely and you will need to reconfigure all settings.

Please record any information prior to the reset.

Tabla de contenidos

Otros manuales de Servidor de Cisco

Cisco

Cisco UCS C200 Instrucciones de instalación y mantenimiento

Cisco

Cisco IE-3000-8TC Manual de instrucciones

Cisco

Cisco AS5300 - Universal Access Server Documento técnico

Cisco

Cisco UCS C220 M3 Manual de usuario

Cisco

Cisco Nexus 7000 Series Manual de usuario

Cisco

Cisco UCS C220 Instrucciones de instalación y mantenimiento

Cisco

Cisco UCS 5100 Manual de uso y cuidado

Cisco

Cisco Firepower 2100 Series Manual

Cisco

Cisco UCS B440 M2 Manual de usuario

Cisco

Cisco Profile Series Manual de usuario

Cisco

Cisco Digital Media System 3.5 Manual de usuario

Cisco

Cisco ONS 15454 ETSI Manual de usuario

Cisco

Cisco UCS B460 M4 Manual

Cisco

Cisco CSACS-1121-K9 Manual de usuario

Cisco

Cisco UCS C220 Instrucciones de instalación y mantenimiento

Cisco

Cisco UCS C200 Instrucciones de instalación y mantenimiento

Cisco

Cisco NCS 1001 Manual de usuario

Cisco

Cisco 2501 - Router - EN Manual de usuario

Cisco

Cisco UCS C220 M3 Manual del sistema

Cisco

Cisco MXE 3500 Manual

Cisco

Cisco UCS B200 Manual de usuario

Cisco

Cisco AS5300-96VOIP-A Manual de usuario

Cisco

Cisco UCS C24 M3 Manual de usuario

Cisco

Cisco TelePresence Server 7010 Guía de referencia

Manuales populares de Servidor de otras marcas

HP

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario