Cisco UCS 5100 Manual de uso y cuidado
Common Tips in UCS Firmware Management
Document ID: 110475
Contents
Introduction
Prerequisites
Requirements
Components Used
Network Diagram
Conventions
Main Task
1. Download Firmware from Cisco.com
2.1 Firmware Management with GUI
2.2 Firmware Management with CLI
Verify
Troubleshoot
Related Information
Introduction
This document presents some common tips to simplify your daily firmware management process.
Prerequisites
Requirements
Cisco recommends that you:
Have a working knowledge of Cisco UCS Server Blade software and hardware.• Be familiar with the UCS manager GUI.• Understand the impact and implications of the different commands described in this document• Be familiar with the UCS components and topology. Refer to the diagram for a typical solution•
Components Used
The information in this document is based on Cisco UCS.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a default configuration. If your network is live, make sure that you
understand the potential impact of any command.
Network Diagram
A typical Cisco UCS topology looks something like this:
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.
Main Task
1. Download Firmware from Cisco.com
Complete these steps:
Navigate to the SW Center Homepage and select a Product Category.1.
Choose a product from the hierarchical tree that appears.2.
Select a Software Type if multiple Software Types exist for the product you selected.3.
Click the Image Name, and the details for that image appear with an option to download.4.
Click Image.bin. You must accept the standard Cisco End User License Agreement (EULA).
Once you accept the EULA, the download begins.
5.
2.1 Firmware Management with GUI
Before you perform firmware management, refer to prerequisites for firmware upgrade or downgrade. It is
recommended that all firmware management be handled through the GUI.
View Installed Firmware
Complete these steps in order to view installed firmware in UCS through the GUI:
Log into Cisco UCS Manager.1. In the Navigation pane, click the Equipment tab.2. Click the Firmware Management tab in the Work pane.3. Click the Installed Firmware tab.4.
Packages
The Packages tab:
Keeps track of all packages on the system• Shows deleted Images• When all Images are deleted, the package is removed from the tab•
Images
The Images tab:
Allows you to obtain information on individual Images in the package• Allows you delete the Images• Once all Images associated to a Package are deleted, the Package is removed from the Package tab•
Download Tasks
When you download a firmware image bundle, a Fabric Interconnect needs at least twice as much available
space as the size of the firmware image bundle. If the bootflash does not have sufficient space, delete the
obsolete firmware, core files, and other unnecessary objects from the fabric interconnect. Before you
download a new bundle, check the available free space on the Fabric Interconnects:
In the Navigation pane, select Equipment.1. Expand Fabric Interconnects, and select Fabric Interconnect #.2. Click the General tab in the Work pane to the right.3. Expand Local Storage Information.4. Check both fabric interconnects.5. Delete Images and Packages if space is limited.6.
Use the Download Tasks tab in order to download firmware. The firmware image name can be between one
and 16 alphanumeric characters. You cannot use spaces or any special characters, and you cannot change this
name after the object has been saved. The system downloads and unpackages the bundle and distributes it to
both fabric interconnects. You can watch the progress on the FSM tab.
From this screen, you can download, update, and activate firmware.
2.2 Firmware Management with CLI
Complete these steps in order to view installed firmware in UCS through the CLI:
Log into Cisco UCS through the CLI.1. Issue the scope system command.2. Enter the show firmware expand command.3.
View Installed Firmware
F340−31−17−FI−A#
F340−31−17−FI−A# scope system
F340−31−17−FI−A /system # show firmware expand
UCSM:
Running−Vers: 1.0(1e)
Activate−Status: Ready
Fabric Interconnect A:
Running−Kern−Vers: 4.0(1a)N2(1.1e)
Running−Sys−Vers: 4.0(1a)N2(1.1e)
Startup−Kern−Vers: 4.0(1a)N2(1.1e)
Startup−Sys−Vers: 4.0(1a)N2(1.1e)
Act−Kern−Status: Ready
Act−Sys−Status: Ready
Bootloader−Vers: v1.2.0(06/19/08)
scope firmware is a useful CLI command that allows you to:
Delete• Download• Scopeto download tasks•
Showdownload tasks, event, fsm, image, and package•
Image update and activation is done from the scope of individual components
scope firmware
F340−31−17−FI−A#
F340−31−17−FI−A# scope firmware
F340−31−17−FI−A /firmware # ?
delete Delete managed objects
download Download
exit Exit from command interpreter
scope Changes the current mode
show Show system information
F340−31−17−FI−A /firmware #
Verify
There is currently no specific verification information available for this configuration
Troubleshoot
There is currently no specific troubleshooting information available for this configuration.
Related Information
Technical Support & Documentation − Cisco Systems•
Contacts & Feedback | Help | Site Map
© 2014 − 2015 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.
Updated: Aug 10, 2010 Document ID: 110475
Otros manuales para UCS 5100
6
Tabla de contenidos
Otros manuales de Servidor de Cisco
Cisco
Cisco UCS B200 M3 Manual del sistema
Cisco
Cisco UCS C210 Instrucciones de instalación y mantenimiento
Cisco
Cisco C880 Series Instrucciones de montaje
Cisco
Cisco TelePresence MSE 8710 Manual de usuario
Cisco
Cisco UCS C3160 Instrucciones de instalación y mantenimiento
Cisco
Cisco UCS C Series Instrucciones de montaje
Cisco
Cisco UCS B200 M3 Manual
Cisco
Cisco ONS 15454 SDH Manual de usuario
Cisco
Cisco UCS C220 M3 Manual de usuario
Cisco
Cisco SCE 8000 10GBE Manual de usuario
Cisco
Cisco Profile Series Manual de usuario
Cisco
Cisco UCS X9508 Guía de inicio rápido
Cisco
Cisco PDS2000 Manual de usuario
Cisco
Cisco ASR 5000 Series Manual de instrucciones
Cisco
Cisco UCS C240 Instrucciones de instalación y mantenimiento
Cisco
Cisco AS5300 - Universal Access Server Manual de usuario
Cisco
Cisco B200 M3 Manual de usuario
Cisco
Cisco UCS C240 M3 Manual de usuario
Cisco
Cisco IP/TV 3400 Series Manual de usuario
Cisco
Cisco UCS E Series Instrucciones de funcionamiento y seguridad
