Cisco Meraki MV32 Manual de usuario

MV32 Installation Guide

MV32 Overview

The Cisco Meraki MV32 is a network fisheye camera that is exceptionally simple to deploy and configure due to its

integration into the Meraki Dashboard and the use of cloud augmented edge storage. The MV family eliminates complex

and costly servers and video recorders required by traditional solutions which removes the limitations typically placed on

video surveillance deployments.

Before mounting to any surface, ensure you have read through the placement guidelines below to ensure best field of

view.

Package Contents

In addition to the MV camera, the following are provided:

From top-left to bottom-right:

• 1 x MV32

• 1 x base mount wall template

• 1 x base mount plate

• 1 x T6 Torx key

• 3 x wall screws

• 3 x wall anchors

Powering the MV32

The MV32 features a 1000BASE-TX Ethernet port and requires 802.3af PoE minimally for operation. Route the Ethernet

cable from an active port on a PoE switch or PoE injector.

Note: Power over Ethernet supports a maximum cable length of 300 ft (100 m).

Placement Guidelines

The Meraki MV32 is a fisheye camera boasting a full 360 degree field-of-view of the area underneath the camera. The

resulting camera image provides an expansive view of its nearby surroundings. This becomes extremely useful when

you want to capture an overview of your entire scene and can take the place of multiple cameras. To ensure you have

sufficient camera coverage for your specific use case, the placement guidelines for MV32 are outlined along with

expected coverage quality.

Initial Considerations

While the MV32 enables you to achieve a broad overview of the area to gain situation awareness, it does not completely

replace the need for other cameras in your surveillance network. First, consider the goal(s) you hope to achieve with

your new fisheye camera. Some questions to ask yourself include;

1. What level of detail do you require from your image?

Note: You can change between different viewing options on the MV32. Read this article.

2. What distance from the camera’s center is this level of detail required?

3. Are there any restrictions around mounting cameras to walls and/or ceilings?

We recommend utilizing the fisheye camera to detect an event of interest, and a fixed lens or varifocal camera to identify

key details for further action. For example, if placing an MV32 in the center of a room, an MV12 or MV22 camera that

is placed facing key points of entry will provide you the level of detail in the event that person identification is required.

General Guidelines

To maximize the coverage of your MV32, the right placement and positioning is essential. The following tips and

guidelines should be considered when positioning your MV32:

•Mount the camera 10 - 14 ft (3 - 4.3 m) above the ground to optimize for object detail within 20 ft (6.1m) of the

surrounding area. At this height, the on-board analytics can detect objects within a radius of up to 25 ft (7.6 m) from

the camera’s center.

•Position your camera away from corners to fully utilize its 360 degree FoV. The ideal placement is typically on

the ceiling at or near the center of a room.

•Keep ambient lighting consistent. With a larger FoV, it can be difficult to maintain consistent lighting conditions

throughout the entire frame. Two areas of drastically different lux levels will impact the quality of your video stream.

Monitor your camera’s visibility during installation to determine if additional light sources are required to capture the

entire scene. Avoid placing cameras where light sources are pointed directly at the camera dome, as this can cause

degradation of image quality.

Coverage Guidelines

At the recommended height of 10-14 feet off the ground, the level of detail which can be captured from the camera is

represented below. The following screenshots will give you an idea of the level of detail you can expect to see from

certain distances away from the center of the camera. The subject is 5 ft 7 in (171 cm) tall and holding an MV gnome

which is 8 in (20 cm) tall.

• 0 to 10 feet: At this distance, detailed images can be captured which allow identification of an object or person.

Facial details can be discerned and small objects can be identified.

Note: If your surface is very high, you can use the Telescoping Pendant Mount to lower the mounting height of

the camera.

• 10 to 20 feet: At this distance, object and person identification is still possible, however some details will be lost.

• 20 to 40 feet: At this distance, details will be lost and identification of objects or people will become difficult. Smaller

objects may become invisible. If identification is needed at these distances, consider supplementing your camera

design with additional cameras.

Understanding the amount of detail required at a specific radius extending from your fisheye camera will allow proper

planning and design of your security camera system.

Frequently Asked Questions

Can I mount the MV32 on the wall?

If placed on a wall, half of the camera’s field of view will face the perpendicular ceiling. This does not properly use of the

360-degree field of view of this camera. The MV32 is better installed on a ceiling, where the more of the field of view

captures useful content. Additionally, the digital pan-tilt-zoom (DPTZ) feature of the MV32 is currently configured for

ceiling mounting.

Furthermore, the camera’s computer vision analytics function on training algorithms based on a top-down view of its

surroundings. Orientations differing from this model will limit the performance of the camera’s analytics. Therefore, it is

not recommended to install the MV32 perpendicular to the ground.

What happens if I place the camera on a surface higher than the recommended 10-14 ft?

Mounting the MV32 higher than the recommended maximum height of 14 feet will result in decreased image quality of

the surrounding area and impact the performance of the built-in people detection analytics. Placement at this height will

enable an overview of larger areas but impact the amount of recognizable detail in the image. If your surface is very

high, you can use the Telescoping Pendant Mount to lower the mounting height of the camera.

Can I replace all my cameras with a single MV32?

The MV32 is a great option to deploy if you desire a broad overview of the scene and to gain situational awareness. In

general, we recommend utilizing the fisheye camera to detect an event of interest, and a fixed lens or varifocal camera

to identify key details of the scene.

Pre-Install Preparation

You should complete the following steps before going on-site to perform an installation:

Configure Your Network in Dashboard

The following is a brief overview only of the steps required to add an MV32 to your network. For detailed instructions

about creating, configuring and managing Meraki Camera networks, refer to the online documentation

(https://documentation.meraki.com/MV).

1. Login to http://dashboard.meraki.com. If this is your ﬁrst time, create a new account.

2. Find the network to which you plan to add your cameras or create a new network.

3. Add your cameras to your network. You will need your Meraki order number (found on your invoice) or the serial

number of each camera, which looks like Qxxx-xxxx-xxxx, and is found on the bottom of the unit.

4. Verify that you the camera is now listed under Cameras > Monitor > Cameras.

Check and Configure Firewall Settings

If a ﬁrewall is in place, it must allow outgoing connections on particular ports to particular IP addresses. The most

current list of outbound ports and IP addresses for your particular organization can be found here.

DNS Configuration

Each MV32 will generate a unique domain name to allow for secured direct streaming functionality. These domain

names resolve an A record for the private IP address of the camera. Any public recursive DNS server will resolve this

domain.

If utilizing an on site DNS server, please whitelist *.devices.meraki.direct or configure a conditional forwarder so that

local domains are not appended to *.devices.meraki.direct and that these domain requests are forwarded to Google

public DNS.

Assigning IP Addresses

At this time, the MV32 does not support static IP assignment. MV32 units must be added to a subnet that uses DHCP

and has available DHCP addresses to operate correctly.

Installation Instructions

Note: Each MV32 comes with an instruction pamphlet within the box. This pamphlet contains detailed step by step

guides and images to assist in the physical install of the camera. A pdf of the pamphlet can be found here.

Note:During first time setup, the MV32 will automatically update to the latest stable firmware. Some features may be

unavailable until this automatic update is completed. This process may take up to 5 minutes due to enabling of whole

disk encryption.

Mounting Instructions

For most mounting scenarios, the MV32 wall mount provides a quick, simple, and flexible means for mounting your

device. The installation should be done in a few simple steps:

Note: Leave protective plastic cover on the optical dome, as this will prevent the optical dome from any damage during

installation.

1. First route the Ethernet cable through the ceiling surface or ceiling tile hole. Position the mounting template such that

the "Meraki MV32" text is aligned with your desired image orientation. This could mean orienting the image to align

North-to-South or with objects of interest within the field of view.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Cisco

Cisco

Cisco WVC210 - Small Business Wireless-G PTZ Internet Video... Manual de usuario

Cisco

Cisco 3421V Manual de usuario

Cisco

Cisco 3630 Manual de usuario

Cisco

Cisco PVC300 - Small Business Pan Tilt Optical Zoom Internet Camera... Manual de instrucciones

Cisco

Cisco CIVS-IPC-5010 Manual de usuario

Cisco

Cisco 6020 Manual de usuario

Cisco

Cisco WVC210 - Small Business Wireless-G PTZ Internet Video... Manual de usuario

Cisco

Cisco Small Business VC220 Manual de usuario

Cisco

Cisco TelePresence MX700 Manual de usuario

Cisco

Cisco 6020 Instrucciones de funcionamiento y seguridad

Cisco

Cisco 8020 Manual de usuario

Cisco

Cisco Small Business VC220 Manual de instrucciones

Cisco

Cisco Meraki MV13 Series Manual de usuario

Cisco

Cisco WVC210 - Small Business Wireless-G PTZ Internet Video... Manual de usuario

Cisco

Cisco Nexus 5010 Manual de usuario

Cisco

Cisco 3530 Instrucciones de funcionamiento y seguridad

Cisco

Cisco 3530 Manual de usuario

Cisco

Cisco WVC210 - Small Business Wireless-G PTZ Internet Video... Manual de usuario

Cisco

Cisco PVC2300 - Small Business Internet Video... Manual de usuario

Cisco

Cisco WVC80N Manual de usuario

Cisco

Cisco Small Business VC220 Manual de usuario

Cisco

Cisco Small Business VC240 Manual de usuario

Cisco

Cisco WVC80N Manual de usuario

Cisco

Cisco 2630 IP Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario