Cisco RV120W Manual de usuario

Otros manuales para RV120W

4

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Enrutador de red de Cisco

Cisco

Cisco RV130 Manual de instalación y operación

Cisco

Cisco ASR1004 - ASR 1004 Modular Expansion Base Manual de usuario

Cisco

Cisco 7200 VXR Series Manual de usuario

Cisco

Cisco ASR 1013 Manual de usuario

Cisco

Cisco Aironet 1000 Series Manual de usuario

Cisco

Cisco 8608 Manual de usuario

Cisco

Cisco NCS 5000 Series Manual

Cisco

Cisco ISR G2 Series Manual de usuario

Cisco

Cisco CRS-1 - Carrier Routing System Router Manual de usuario

Cisco

Cisco ASR 5000 Manual de usuario

Cisco

Cisco 2611 - Router - EN Manual de usuario

Cisco

Cisco 6000 series Manual de usuario

Cisco

Cisco 1603R Manual de usuario

Cisco

Cisco 2600 Series Manual de usuario

Cisco

Cisco XR 12000 Manual de usuario

Cisco

Cisco 1401 Manual de usuario

Cisco

Cisco 1710 Manual de usuario

Cisco

Cisco XR 12000 Manual de usuario

Cisco

Cisco ASR-920-12SZ-IM Manual de usuario

Cisco

Cisco ACE-4710-K9 Manual de instrucciones

Cisco

Cisco Catalyst 8540 MSR Manual de usuario

Cisco

Cisco ASR 5500 Manual de usuario

Cisco

Cisco RV130 Manual de instrucciones

Cisco

Cisco RV180 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

EnGenius

EnGenius ESR-9710 Manual de usuario

LevelOne

LevelOne FBR-1416 Manual de usuario

Dynacord

Dynacord Promatrix 6000 Manual de usuario

Lorex

Lorex F5D8230-4 Manual de usuario

Factory Reset and Reboot on RV120W and

RV220W

Objective

The router can be set to factory default if the Reset button on the router is pressed or

through the web configuration utility on the router. Press the Reset button on the back of the

router for 8 seconds to reset your router to its factory default settings. Any settings on the

router will be erased and the router IP address will become "192.168.1.1". Both the

username and the password will be "cisco".

Reboot is a soft operation which a user might need to use if there is a problem with software

or hardware. Reboot is handled by software and happens in automatic mode. Reset on the

other hand is a rough operation which a user might need when the device cannot restart or

be turned off.

This article explains how to reset your device through the reset button and also through the

configuration utility.

Applicable Devices

• RV120W

• RV220W

Software Version

• v1.0.4.17

Functions of the Reset Button

The button has two functions:

• Reboot — Press the button for at least 3 seconds but no more than 8 seconds.

• Reset — Press and hold in the button for more than 8 seconds. This resets the unit and

restores the factory defaults.

Reset the Router with the Reset Button

Note: Take note of the current settings of the device before resetting.

Resetting through Reset button can be done in two ways:

1. Press the Reset button of the router for 8 seconds. All the display LEDs light up to

indicate the start of the reset process.

2. If the normal reset does not work, unplug the power adapter and then plug it back in while

you press the Reset button.

Reboot the Router with the Reset Button

Reboot through Reset button can be done in only one way:

1. Press the Reset button of the router for at least 3 seconds but no more than 8 seconds.

The power LED of the router blinks to verify that the router has restarted.

Reboot the Router with the Web Configuration Utility

Step 1. Log in to the web configuration utility and choose Administration > Reboot. The

Reboot page opens:

Step 2. Click Reboot to proceed with the reboot of router.

Reset the Router with the Web Configuration Utility

Step 1. Log in to the web configuration utility and choose Administration > Restore

Factory Default. The Restore Factory Defaults page opens:

Step 2. Click Default to proceed with the restore of factory default settings.