Cisco ASR 903 Manual de usuario

Cisco Systems, Inc.

www.cisco.com

Cisco has more than 200 offices worldwide.

Addresses, phone numbers, and fax numbers

are listed on the Cisco website at

www.cisco.com/go/offices.

Cisco ASR 903 Router Hardware

Installation Guide

July 2013

Text Part Number: OL-25178-03

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this

URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display

output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in

illustrative content is unintentional and coincidental.

Cisco ASR 903 Router Hardware Installation Guide

iii

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-03

CONTENTS

About this Book ix

Document Revision History ix

Document Audience x

Document Organization x

Document Conventions x

Obtaining Documentation and Submitting a Service Request xi

CHAPTER

1Cisco ASR 903 router Overview 1-1

Cisco ASR 903 router Features 1-1

System Specifications 1-2

Power Supply Features 1-3

Redundancy 1-4

Dying Gasp 1-4

Status LEDs 1-4

DC Power Specifications 1-4

AC Power Specifications 1-6

Fan Tray 1-6

Fan Tray (A903-FAN) 1-7

Fan Tray (A903-FAN-E) 1-7

Air Plenum 1-8

RSP Modules 1-9

Supported RSPs 1-9

Supported RSP Features 1-10

RSP Redundancy 1-10

Network Timing Interfaces 1-10

RSP Interfaces 1-10

Interface Modules 1-11

Gigabit Ethernet SFP Interface Module 1-12

Gigabit Ethernet RJ45 Interface Module 1-13

10 Gigabit Ethernet XFP Interface Module 1-14

T1/E1 Interface Module 1-16

OC-3 Interface Module 1-16

Serial Interface Module 1-17

Temperature Sensor 1-20

Contents

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-03

Serial Number Label Location 1-20

Interface Numbering 1-20

Regulatory Compliance 1-21

CHAPTER

2Preparing for Installation 2-1

Safety Guidelines 2-1

Standard Warning Statements 2-2

Safety Guidelines for Personal Safety and Equipment Protection 2-3

Safety Precautions for Module Installation and Removal 2-3

Safety with Electricity 2-4

Power Supply Considerations 2-8

Preventing ESD Damage 2-8

Site Planning 2-9

General Precautions 2-9

Site Planning Checklist 2-9

Site Selection Guidelines 2-10

Environmental Requirements 2-10

Physical Characteristics 2-10

Air Flow Guidelines 2-11

Air Flow Guidelines for Enclosed Rack Installation 2-12

Floor Loading Considerations 2-12

Site Power Guidelines 2-12

Electrical Circuit Requirements 2-13

Site Cabling Guidelines 2-13

Asynchronous Terminal Connections 2-14

Interference Considerations 2-14

Rack-Mounting Guidelines 2-15

Precautions for Rack-Mounting 2-15

Rack Selection Guidelines 2-15

Equipment Rack Guidelines 2-16

Installation Checklist 2-18

Creating a Site Log 2-19

Receiving the Cisco ASR 903 Router 2-19

Chassis-Lifting Guidelines 2-20

Tools and Equipment 2-20

Unpacking and Verifying the Shipped Contents 2-21

CHAPTER

3Installing the Cisco ASR 903 Router 3-1

Prerequisites 3-1

Contents

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-03

Installing the Router in a Rack 3-1

Installing the Chassis Brackets 3-2

Installing the Router Chassis in the Rack 3-3

Installing the Chassis in the Air Plenum 3-4

Attaching the Cable Management Brackets 3-5

Installing the Chassis Ground Connection 3-7

Installing the Fan Tray 3-10

Installing the Dust Filter 3-10

Removing the Dust Filter 3-11

Removing and Replacing the Fan Tray 3-11

RSP Installation 3-13

Installing an RSP Module 3-14

Removing an RSP Module 3-15

Hot-Swapping an RSP Module 3-16

Interface Module Installation 3-17

Installing an Interface Module 3-17

Removing an Interface Module 3-18

Hot-Swapping an Interface Module 3-18

Installing the Power Supply 3-19

Preventing Power Loss 3-20

Power Connection Guidelines 3-20

Guidelines for DC-Powered Systems 3-20

Guidelines for AC-Powered Systems 3-21

Installing the DC Power Supply 3-21

Installing the DC Power Supply Module 3-21

Installing Terminal Block on the DC PEM Unit (A900-PWR550-D) 3-22

Installing Terminal Block Connector on the DC PEM Unit (A900-PWR550-D-E) 3-25

Activating the DC Power Supply 3-26

Removing and Replacing the DC Power Supply 3-26

Installing the AC power Supply 3-27

Installing the AC Power Supply Module 3-28

Activating the AC Power Supply 3-28

Removing and Replacing the AC Power Supply 3-29

Connecting the Cisco ASR 903 Router to the Network 3-30

Connecting Console Cables 3-30

Connecting to the Serial Port using Microsoft Windows 3-31

Connecting to the Console Port using Mac OS X 3-33

Connecting to the Console Port using Linux 3-33

Installing the Cisco Microsoft Windows USB Device Driver 3-34

Contents

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-03

Uninstalling the Cisco Microsoft Windows USB Driver 3-35

Connecting to the Auxiliary Port 3-36

Connecting a Management Ethernet Cable 3-38

Installing and Removing SFP and XFP Modules 3-38

Connecting a USB Flash Device 3-38

Removing a USB Flash Device 3-39

Connecting Timing Cables 3-39

Connecting Cables to the BITS Interface 3-39

Connecting Cables to a GPS Interface 3-41

Connecting Ethernet Cables 3-42

Connecting Cables to SFP Modules 3-43

Connecting T1/E1 cables 3-43

Installing the Cable Connector 3-43

RJ45 Cable Pinouts 3-44

Connecting Cables to the Patch Panel 3-44

Recommended Patch Panel 3-45

Connecting Serial Cables 3-45

Connecting the Fan Tray Alarm Port 3-47

Connector and Cable Specifications 3-47

CHAPTER

4Cisco ASR 903 Router Initial Configuration 4-1

Checking Conditions Prior to System Startup 4-1

Powering Up the Cisco ASR 903 Router 4-2

Verifying the Front Panel LEDs 4-5

Verifying the Hardware Configuration 4-5

Checking Hardware and Software Compatibility 4-5

Configuring the Cisco ASR 903 Router at Startup 4-5

Using the Console Interface 4-6

Configuring Global Parameters 4-6

Checking the Running Configuration Settings 4-7

Saving the Running Configuration to NVRAM 4-7

Safely Powering Off the Cisco ASR 903 Router 4-8

CHAPTER

5Troubleshooting 5-1

Pinouts 5-1

BITS Port Pinout 5-1

GPS Port Pinout 5-2

Time of Day Port Pinout 5-2

Alarm Port Pinout 5-3

Contents

vii

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-03

Console/Aux RJ45 RS232 Serial Port Pinout 5-3

T1/E1 Port Pinout 5-4

Serial Cable Pinouts 5-5

Management Ethernet Port Pinout 5-7

USB Console Port Pinout 5-7

USB Flash/MEM Port Pinout 5-7

Fiber-Optic Specifications 5-8

LED Summary 5-8

RSP LEDs 5-8

Interface Module LEDs 5-9

OC-3 Interface Module LEDs 5-10

T1/E1 Interface Module LEDs 5-11

Serial Interface Module LEDs 5-11

Power Supply LEDs 5-12

Fan Tray LEDs 5-13

Alarm Conditions 5-13

CHAPTER

ASite Log and Manufactures A-1

Manufactures A-3

NDEX

Contents

viii

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-03

-ix

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-05

About this Book

The preface describes the revision history, audience, organization, and conventions of Cisco ASR 903

Router Hardware Installation Guide. It also lists sources for obtaining additional information and

technical assistance from Cisco Systems.

•Document Revision History, page ix

•Document Audience, page x

•Document Organization, page x

•Document Conventions, page x

•Obtaining Documentation and Submitting a Service Request, page xi

Document Revision History

The following table lists the major changes made to this document for each release.

Revision Date Change Summary

OL-25178-05 19 November 2013 Updated fan tray, power supply connector, dust filter,

air plenum.

OL-25178-04 30 July 2013 Updated supported SFPs for IOS XE Release 3.10S.

OL-25178-04 3 June 2013 Updated supported SFPs for IOS XE Release 3.9(1).

OL-25178-03 3 April 2013 Updated supported SFPs for IOS XE Release 3.9.

OL-25178-03 29 November 2012 Updated supported SFPs for IOS XE Release 3.8.

OL-25178-03 23 August 2012 Added material for AC power supply, chassis air flow

information, and NEBS certification.

OL-25178-02 30 March 2012 Updated supported SFPs for IOS XE Release 3.6.

OL-25178-02 24 February 2012 Added power draw and installation torque values.

OL-25178-01 16 December 2011 First release published.

-x

Cisco ASR 903 Router Hardware Installation Guide

OL-25178-05

Chapter

Document Audience

This guide is intended for users who are responsible for installing the Cisco ASR 903 Series Aggregation

Services Router. It is intended for users who may not be familiar with the initial configuration and

troubleshooting tasks, the relationship among tasks, or the Cisco IOS software commands necessary to

perform particular tasks.

Document Organization

This guide includes the following chapters and appendix:

Document Conventions

This document uses the following conventions:

Title Description

Chapter 1, “Cisco ASR 903 router

Overview”

This chapter provides an overview of the

Cisco ASR 903 Router.

Chapter 2, “Preparing for

Installation”

This chapter provides site preparation guidelines

for installing the Cisco ASR 903 Router.

Chapter 3, “Installing the Cisco ASR

903 Router”

This chapter describes the Cisco ASR 903 Router

and how to install it.

Chapter 4, “Cisco ASR 903 Router

Initial Configuration”

This chapter describes how to start the

Cisco ASR 903 Router and create an initial

system configuration.

Chapter 5, “Troubleshooting” This chapter provides LED and pinout

information for troubleshooting purposes.

Appendix A, “Site Log and

Manufactures”

This provides a site log for tracking the

installation and maintenance activities of the

router.

Convention Indication

bold font Commands and keywords and user-entered text appear in bold font.

italic font Document titles, new or emphasized terms, and arguments for which you supply

values are in italic font.

[ ] Elements in square brackets are optional.

{x | y | z } Required alternative keywords are grouped in braces and separated by

vertical bars.

[ x | y | z ] Optional alternative keywords are grouped in brackets and separated by

vertical bars.

string A nonquoted set of characters. Do not use quotation marks around the string or

the string will include the quotation marks.

courier font Terminal sessions and information the system displays appear in courier font.

< > Nonprinting characters such as passwords are in angle brackets.

Otros manuales para ASR 903

Tabla de contenidos

Otros manuales de Enrutador de red de Cisco

Cisco

Cisco 1600 series Manual de usuario

Cisco

Cisco Cisco 12416 Manual del operador

Cisco

Cisco uBR924 Manual de instalación

Cisco

Cisco MWR 2941 Manual de funcionamiento

Cisco

Cisco 7200 Series Instrucciones originales

Cisco

Cisco RVS4000 - Gigabit Security Router Manual de instrucciones

Cisco

Cisco Card Cage and Backplane 7513-MX Manual de usuario

Cisco

Cisco 2600 Series Manual

Cisco

Cisco ASR1002 - ASR 1002 Router Manual de usuario

Cisco

Cisco RV132W Manual de usuario

Cisco

Cisco ASR 1000 Series Manual

Cisco

Cisco 10000 Series Manual de usuario

Cisco

Cisco ASR 1006 Manual de usuario

Cisco

Cisco o SOHO 77H Manual de usuario

Cisco

Cisco Linksys WRT54GS Instrucciones de funcionamiento originales

Cisco

Cisco 1100 Series Manual de instrucciones

Cisco

Cisco Small Business Pro SRP527W Manual de usuario

Cisco

Cisco 851-K9 - 851 Integrated Services Router Manual de usuario

Cisco

Cisco SPS2024 Manual de usuario

Cisco

Cisco Linksys RV042 Manual de usuario

Cisco

Cisco WGA54G Manual de usuario

Cisco

Cisco CRS-1 - Carrier Routing System Router Manual de usuario

Cisco

Cisco 3640 Series Manual de usuario

Cisco

Cisco 8600 Manual

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

EnGenius

EnGenius ESR-9710 Manual de usuario

LevelOne

LevelOne FBR-1416 Manual de usuario

Dynacord

Dynacord Promatrix 6000 Manual de usuario

Lorex

Lorex F5D8230-4 Manual de usuario