Cisco Cisco 7940 Manual de usuario

CISCO 7940/7960 IP PHONE USER GUIDE

Somerset I.S.D. - Documentation

Cisco Voice over

IP Phone

Cisco 7960 IP Phone

Note: The only difference between Cisco 7940 & 7960 is the number of lines.

Cisco 7960/7940 IP Phone Overview

Handset with Indicator Light

Functions like a traditional handset. The light strip at the top of the handset blinks when

the phone rings and will be set to remain lit when you receive a voice mail message.

Line or Speed Dial Buttons

Opens a new line, speed dials the number on the LCD screen, or ends a call. Cisco IP

Phone 7960 has six lines or speed dial buttons and the 7940 has two.

Cisco IP Phone Model Type

Indicates your Cisco IP phone model.

LCD Screen

Displays features such as time, date, your phone number, caller ID if available, line/call

status and soft key tabs.

LCD Display Contrast

1. Press the SETTINGS button

2. Use the SCROLL button to select the Contrast option on the Settings Menu

3. Press the Select soft key to display the contrast settings

4. Use the Up and Down soft keys to set the desired intensity of the LCD

display and press the OK soft key to save your settings

5. Press the Save soft key to save your selection and exit the Settings

“Soft Key” Buttons

Four interactive “soft keys” that provide available call features and functions.

Example: Handset on Cradle:

Redial NewCall CfwdAll more

Hold EndCall Resume more

Answer MeetMe Pickup more

GpickUp Trnsfer Park more

Confrn more

(note dark vs. light shading)

Example: Lift the Handset without Dialing anything:

Redial EndCall CfwdAll more

MeetMe PickUp GpickUp more

(note EndCall instead of NewCall)

Example: During a Call:

Hold EndCall Trnsfer more

Park Confrn more

Footstand Adjustment

Allows you to adjust the angle of the phone base.

Directories Button

Provides access to Call Histories and Directories

“?” or “i” Button

Displays help on your LCD screen for a phone button or function.

Setting Button

Provide access to phone settings such as Contrast and Ring Sound, Network

Configuration and Status.

Speaker Button

Toggles the Speaker On and Off.

Mute Button

Toggles the Mute On and Off.

Press the MUTE button to prevent the party from hearing you although you can still

hear them. The Mute button changes to red. To turn off mute, press the MUTE button

again.

Headset Button

Toggles the Headset (if connected) On and Off.

Volume Button

Increases or decreases the volume for the handset, headset or speakerphone (depending

on which is being used).

Press the Down button to decrease the volume of the handset, speakerphone, or headset

Press the UP button to increase volume of the handset, speakerphone, or headset

To save the volume setting, press the # key

Messages Button

Provides access to the Voicemail Messaging System.

Navigation Button (Toggle UP/DOWN Key) or “SCROLL Key”

Enables you to scroll through text and select features displayed on the LCD Screen

Dial Pad

Works exactly like the dial pad on a traditional phone.

Cisco 7960/7940 IP Phone Basic Features

Installing the IP Phone and Connecting to the Network

1. Connect an Ethernet cable to the Network port (middle port) on the phone.

2. Connect the handset and headset (if applicable) to their respective ports.

3. Connect the Ethernet cable from your Desktop PC to the Access Port on the IP

Phone (optional).

4. Connect the power plug to the DC48V AC Adapter port (optional).

Note: Before successfully installing the phone, the system administrator must prepare

the network for the phone.

Adjusting the Height of the Footstand

1. Push the footstand adjustment knob on the right-hand side of the phone.

2. With the button depressed, adjust the footstand to the desired height.

3. Depress the footstand adjustment knob.

Placing a Call

There are six options for placing a new call.

1. Lift the Handset and dial the number.

2. Press a Line button and dial the number.

3. Press the Speaker button and dial the number.

4. Press the Headset button and dial the number.

5. Press the NewCall soft key and dial the number.

6. Press a pre-configured Speed Dial button.

Internal Extension:

Dial the 4-digit extension

External Local Call:

Dial 9 + the entire 7-digit phone number

Long Distance:

Dial 9 + the entire 10-digit phone number (area code + number)

Note: After you press the 9 (for an outside line) you will hear a dial tone again to let

you know you are accessing an external line.

Note: Pick up the handset. If you do not hear a dial tone, press an available line button

to begin making the call.

Note: Press the SPEAKER button. If you do not hear a dial tone, press an available

line button to begin to make the call or press the NewCall soft key. If you do not hear a

dial tone, press an available line button to begin to make the call (the call will dial with

the speakerphone on).

Answering a Call

There are four options for answering a call.

1. Lift the Handset.

2. Press the Answer soft key.

3. Press the Speaker button.

4. Press the Headset button.

Note: If “Line 1” is ringing, pick up the handset and you will be automatically

connected to the call.

Note: If any other line is ringing, lift up the handset (or press the SPEAKER button)

and press the Answer soft key, OR press the line button next to the ringing line

End a Call

There are three options for ending a call.

1. Hang up the Handset.

2. Press the SPEAKER button.

3. Press the EndCall soft key and hang up.

Cisco 7960/7940 IP Phone Soft Features

Parking a Call

Park a call when you want to store the call and then retrieve the call from another IP

Phone. Call Park numbers are pre-configured by your system administrator. Follow the

below steps to park a call:

Step 1) During an active call, press the more soft key until you see the Park tab.

Step 2) Press the Park tab soft key. The LCD screen displays a special call park number

at which the call is stored.

Step 3) Make a note of the call park number and then hang up. The call is parked at that

number, allowing you to retrieve it from another phone.

Step 4) To retrieve the parked call from another phone, dial the call park number at

which the call is parked.

Note: You have a limited amount of time to retrieve the parked call before it reverts to

ringing at its original destination.

Transferring a Call

Follow these steps to Transfer a call to another extension.

Step 1) While on the call, press the Trnsfer soft key (this places the caller on hold).

Step 2) Dial the office extension to which you want to transfer the call.

Step 3) When it rings on the transferred to extension, press Trnsfer soft key again, or

when the party answers the call, announce the call and press the Trnsfer soft

key again.

Step 4) Hang up the phone or end the call.

Note: If the party refuses the call, press the Resume soft key to return to the original

call.

Forward All Calls

Call Forwarding allows you to redirect all incoming calls from your Cisco IP Phone to

another number.

Step 1) Press the CFwdALL soft key (you will hear two beeps).

Step 2) Dial the 4-digit extension to which all calls will be forwarded.

Note: Be sure to enter the number exactly as you would if you were placing a call to

that number. After you enter the number, an animated phone icon with a flashing right

allow appears in the upper-right corner of the LCD screen. The LCD also displays a

message confirming the number or extension to which your calls are being forwarded.

Cancel Forward All Calls

Step 1) Press the CfwdAll soft key (you will hear two beeps).

Note: The flashing right arrow on the LCD display will disappear indicating that Call

Forwarding has been deactivated.

Transfer Directly into a Voice mail Account (Optional)

Step 1) While on the call, press the Trnsfer soft key (this places the caller on hold)

Step 2) Press the Msgs soft key or dial the Voicemail Pilot # 1601

Step 3) Press the * key

Step 4) Enter the extension of the person you are transferring to (at this point, you

may announce the call, or go directly to step 5

Step 5) Press the Trnsfer Soft key to complete the transfer

Place a Call on Hold

Step 1) While on the call, press the Hold soft key

Step 2) To return to a call, press the Resume soft key

Step 3) If multiple calls are on hold, use the SCROLL button to select the desired

call then press the Resume soft key

Placing Conference Calls

To establish a conference call for the existing call.

Step 1) Press the More soft key and then press the ConFrn soft key (this will

automatically select a new line and place the other party on hold)

Step 2) Dial the 4-digit extension or 9 + (local or long distance number)

Step 3) When the party answers, press the ConFrn soft key again and the party

will be added to the conference call

Step 4) Repeat steps 1 through 3 to add additional parties to the conference call

Conference Call Options

Notes: To place a conference call on hold, press the Hold soft key (the other parties

can talk among themselves but they cannot hear you).

Notes: To place a conference call on speakerphone, press the SPEAKER button.

Notes: To mute a conference call on speakerphone, press the MUTE button to turn off

the microphone.

Items to Consider for Conference Calls

•Once the conference call initiator disconnects, no new conferees can be added

•When you place a call on hold, a beeping tone is generated every few seconds.

Consider using the mute instead of hold to avoid disrupting other callers.

•To abandon the addition of a conferee, press the Line button.

•

INITIATING a Meet-Me Conference Call

In a Meet-Me conference call, participants dial a pre-arranged conference number at a

specific time to meet on a call.

Step 1) Contact the network administrator and obtain a meet-me conference number.

Step 2) Lift the Handset and press the more soft key once to display the Meet-Me tab.

Step 3) Press the Meet-Me soft key.

Step 4) Dial the Meet-Me conference number obtained from the network administrator.

JOINING a Meet-Me Conference Call

Step 1) Dial the conference number provided by the Meet-Me conference initiator.

Note: You will be connected to the conference once the initiator has dialed in and

established the Meet-Me call.

Call Pickup

Call Pickup allows you to pick up incoming calls within your own group. A “group” is

defined by your system administrator and typically limited to a neighboring offices or

cubes within “ringing range” of each other. Activate call pickup so that an incoming

call delivered to another extension in your group rings on your extension.

Step 1) Pick-up the handset.

Step 2) Press the more key one time.

Step 3) Press the Pickup key. The call now rings on your phone.

Step 4) Press the answer key and you will be connected to the call.

Group Pickup (Optional)

You can answer a call to your extension outside your call group.

Step 1) As a phone rings at an extension outside of your call group, press a Line

button.

Step 2) Press the More key one time.

Step 3) Press the GPickup key.

Step 4) Dial the desired call pickup group number.

Step 5) Answer the incoming call that is redirected to your phone.

Redial the Last Number Called

Redialing the most recently dialed number.

Step 1) Lift the handset and press the Redial soft key

Note: You can also press the Redial soft key to activate the speakerphone and redial

the last number called.

Cisco 7960/7940 IP Phone Information Features

Accessing Online Help

Can be used in three ways:

1) Pressing the “?” and then any other key about which you would like information.

2) Pressing the “?” button twice quickly to view information about the selected

features.

3) Pressing the “?” button twice quickly during an active call to view network statistics

about the active call.

Call History Features

Step 1) To view missed calls, Press the DIRECTORIES button.

Step 2) Use the SCROLL button to select the desired call history option: Missed Calls,

Received Calls or Placed Calls.

Step 3) Press the Select soft key to display the desired call history.

Step 4) When you are finished, press the Exit soft key twice to exit the Directory

Menu.

Note: *** To speed dial a missed call, received call, or placed call, you must edit the

number and insert a 9 before the missed call or received call number. ***

Example:

Step 1) Press the DIRECTORIES button.

Step 2) Use the SCROLL button to select the desired call history (Missed Calls) option

in the Directory Menu.

Otros manuales para Cisco 7940

Este manual sirve para los siguientes modelos

Otros manuales de Teléfono IP de Cisco

Cisco

Cisco 7921G - Unified Wireless IP Phone VoIP Manual de instrucciones

Cisco

Cisco MCS 7800 Series Manual de usuario

Cisco

Cisco 7912 Manual de usuario

Cisco

Cisco DATAVOX 7941 Manual de usuario

Cisco

Cisco 9951 Standard Manual de usuario

Cisco

Cisco CP-7941G Manual de usuario

Cisco

Cisco 7945 Series Manual de usuario

Cisco

Cisco 6800 Series Manual de instrucciones

Cisco

Cisco Razorline 7975 Manual de usuario

Cisco

Cisco MCS 7800 Series Manual de usuario

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Manual de usuario

Cisco

Cisco 8945 Manual de usuario

Cisco

Cisco MCS 7800 Series Manual de usuario

Cisco

Cisco 7945 Series Manual de usuario

Cisco

Cisco 6941 - Unified IP Phone Slimline VoIP Manual de instrucciones

Cisco

Cisco 7965G - Unified IP Phone VoIP Manual de instrucciones

Cisco

Cisco MCS 7800 Series Manual de usuario

Cisco

Cisco 8841 Cómo utilizar

Cisco

Cisco 7921G - Unified Wireless IP Phone VoIP Manual de usuario

Cisco

Cisco 7962 Manual de usuario

Cisco

Cisco 9971 Standard Manual de usuario

Cisco

Cisco 7920 - Unified Wireless IP Phone VoIP Instrucciones originales

Cisco

Cisco IP Conference Station 7935 Manual de usuario

Cisco

Cisco DATAVOX 7941 Manual de usuario

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Polycom

Polycom Polycom VVX 600 Manual de usuario

Polycom

Polycom SoundPoint IP 450 Manual de usuario

Polycom

Polycom SoundPoint IP 650 Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

Avaya

Avaya Integral 5 R3.0 Manual de usuario

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Avaya

Avaya 4600 Series Manual de servicio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario

Nortel

Nortel i2050 Manual de usuario

Fiberme

Fiberme FAP260 Series Manual de usuario