Circutor Raption 50 Series Manual de usuario

Raption 50 Series

INSTRUCTION MANUAL

(M186B01-03-20A)

Raption 50

2Instruction Manual

Raption 50

3Instruction Manual

Disclaimer

Revision log

Date Revision Description

01/18 M186B01-03-18A Initial Version

03/18 M186B01-03-18B Changes in the following sections:

6.2.4. - 6.3.2. - 6.3.4. - 7.3. - 8.1. - 10.

10/19 M186B01-03-19A Changes in the following sections:

4.E.B. - 4.E.F. - 4.E.6. - 5.B.4.2

02/20 M186B01-03-20A

Changes in the following sections:

4.B. - 7.A. - 7.B. - 7.C. - 7.D. - 7.E. - 7.F. - 7.G. -

8.A. - 8.B.

CIRCUTOR, SA reserves the right to make modiﬁcations to the device or the unit speciﬁcations

set out in this instruction manual without prior notice.

CIRCUTOR, SA on its web site, supplies its customers with the latest versions of the device

speciﬁcations and the most updated manuals.

www.circutor.com

Raption 50

4Instruction Manual

Raption 50 Series

Instruction Manual

This document is copyrighted, 2017 by Circutor, S.A. All rights are reserved. Circutor,

S.A. reserves the right to make improvements to the products described in this

manual at any time without notice.

No part of this manual can be reproduced, copied, translated or transmitted in

any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

All other product names or trademarks are properties of their respective owners.

Raption 50

5Instruction Manual

Here is your guide to

use and conﬁgure

Raption 50 Series

Disclaimer ...............................................................................................................................3

Revision Log ...........................................................................................................................3

Here is your guide to use and conﬁgure Raption 50 Series ....................................5

1. So, hello! .............................................................................................................................8

2. Features ...........................................................................................................................10

A. Main features ..............................................................................................................10

B. Overview .......................................................................................................................11

C. Dimensions ..................................................................................................................12

D. Status Beacon lights .................................................................................................13

E. Connectors ...................................................................................................................14

3. How to use it? .................................................................................................................18

A. General .........................................................................................................................18

B. Starting a charging session ...................................................................................21

C. Special events starting a charge ..........................................................................24

D. Stopping a charging session ..................................................................................29

E. Charging information ................................................................................................31

F. Charging summary ....................................................................................................34

G. Emergency button .....................................................................................................36

H. Connectors status .....................................................................................................37

I. Consulting the connectors status ...........................................................................39

J. Errors .............................................................................................................................43

4. How to conﬁgure it? ......................................................................................................44

A. Introduction .................................................................................................................44

B. What is needed? .........................................................................................................45

C. Network topology .......................................................................................................46

D. LAN connection procedure .....................................................................................47

E. Setup Webpage ...........................................................................................................52

A. Dashboard ................................................................................................................53

B. Network .....................................................................................................................59

C. Security .....................................................................................................................61

D. Time ...........................................................................................................................62

E. Integrations ..............................................................................................................63

F. Taris .........................................................................................................................64

G. Services ....................................................................................................................66

H. Firmware ..................................................................................................................68

Raption 50

6Instruction Manual

5. Communications .............................................................................................................70

A. Introduction ...................................................................................................................70

B. Teltonika RUT 240 conﬁguration ............................................................................71

C. Sierra Wireless AirLink LS300 ................................................................................86

6. OCPP Integrations ...........................................................................................................96

A. Introduction ...................................................................................................................96

B. Previous requirements ..............................................................................................97

C. Starting up conﬁguration ..........................................................................................99

D. Checking conﬁguration ...........................................................................................107

7. Monitoring .......................................................................................................................108

A. Introduction ................................................................................................................108

B.PowerStudioclient-Connection...............................................................................109

C.PowerStudioclient-Overview...................................................................................111

D.PowerStudioclient-Devices......................................................................................117

E. PowerStudio client - Graphs ..................................................................................126

F.PowerStudioclient-Tables........................................................................................129

G.PowerStudioclient-Events........................................................................................133

8. Output power setup ......................................................................................................134

A. Introduction ................................................................................................................134

B. Maximum output power tor DC .............................................................................135

C. Maximum output power tor AC .............................................................................140

9. Technical Data ...............................................................................................................142

A. ELECTRICAL DATA Models : TRIO 63, TRIO, DUO, DUO CCS T2S32, DUO CHA

T2S32, CCS and CHA......................................................................................................134

B. ELECTRICAL DATA Model : TRIO 480 V .............................................................. 144

C. GENERAL DATA ........................................................................................................ 145

Need help? ...........................................................................................................................147

Guarantee ............................................................................................................................147

Raption 50

7Instruction Manual

Raption 50

8Instruction Manual

This manual contains all the necessary information for the proper use of the Charge

Point and helps the user to perform charging with a high level of eciency and safety.

The CIRCUTOR Charge Point provides the fastest way to charge electric vehicles

nowadays. Its innovative and original design provides a quick and intuitive way for

recharging the electric vehicles, according to the current regulations. It can carry

out loads into alternating current (AC) and direct current (DC), either individually or

simultaneously.

The unit integrates an intuitive user interface and easy to use, it is an 8” touch screen

by which all necessary for recharging operations are performed. It has been designed

vandal-proof in compliance with all requirements regarding IK indices. In addition, the

Charge Point also has a communications system that allows monitoring and control

remotely via OCPP and use XML parameters and information while the recharging is

being performed. This feature provides an easy way to integrate the Charge Point into

superior systems that allow to the owner or system manager monitor it.

• Compliant with IEC 61851; Electric vehicle conductive charging system

(IEC 61851-1, IEC 61851-22 and IEC 61851-23).

• Compliant with IEC 62196; Plugs, sockets-outlets, vehicle connectors

and vehicles inlets, Conductive charging of electric vehicles (IEC 62196-

1, IEC 62196-2 and IEC 62196-3).

• Compliant with CHAdeMO certiﬁcation.

• Meets the CCS speciﬁcation, ISO/IEC 15118 and DIN SPEC 70121.

• Directives: 2014/53/UE, Radio and Telecommunication Terminal

equipment; 2014/30/UE, Electromagnetic Compatibility (EMC);

2014/35/UE, Low Voltage directive.

• RFID complies with ISO 14443A/B

Raption 50

9Instruction Manual

So, hello!

Important safety instructions

• Read all the instructions before

using and conﬁguring the Charge

Point.

• Do not use the Charge Point for

anything other than electric vehicle

charging modes are expected in IEC

61851.

• Do not modify the Charge Point. If

modiﬁed, CIRCUTOR will reject all

responsibility and the warranty will

be void.

• Comply strictly with electrical

safety regulations according to

your country.

• Do not make repairs or

manipulations with the unit

energized.

• Only trained and qualiﬁed personnel

should have access to the electrical

parts inside the Charge Point.

• Check the installation annually by

qualiﬁed technician.

• Remove from service any item that

has a fault that could be dangerous

for users (broken connectors, caps

that don’t close...).

• Use only CIRCUTOR supplied spare

parts.

• Do not use this product if the

enclosure or the EV connector is

broken, cracked, open, or shows

any other indication of damage.

Read carefully all the instructions before using the

Charge Point.

Raption 50

10 Instruction Manual

AMain features

• HMI: there is a TFT colour touch screen of 8 inches, is the interface between the

Charge Point and the user. Provides detailed information for starting and stopping the

charge, including information concerning the recharge that is in progress (charge state

of the battery, charging time remaining, etc).

• RFID: there is a radio frequency reader that allows user authentication to proceed with

the recharging of the electric vehicle. At the discretion of the facility operator, the user’s

recharge also can be allowed or denied.

• User Management: provides a database that associates users with one or more

identiﬁcation cards, you can also assign consumption and charging logs.

• Beacons light: by a LED beacons located above connectors, it is indicated the charging

status of the socket/connector.

• Ethernet: the unit allows communicate using TCP / IP on an Ethernet network, giving

ﬂexibility to the system operator and management of the Charge Point.

• Remote monitoring and control in real-time 3G/4G: it can be done a remote device

connection or make OCPP integrations thanks to the integrated modem. In addition, by

using a standard Web browser, you can access to the Charge Point to monitor the status

of recharge and even run a Start / Stop remote.

• Historic charge transactions: the system is able to generate charging process

reports, according to the historical database of the Charge Point.

• Energy metering: Integrated meter, independent for AC and DC, is measuring power

and energy consumed by the EV during a charge session.

• OCPP integration: OCPP is a communication protocol between the Charge Point and

management platforms (BackOce) for comprehensive management of charging. This

integration allows, among other things, management and user authentication as well as

a variety of parameters to monitor during a recharge.

Otros manuales para Raption 50 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Circutor

Circutor

Circutor URBAN Series Manual de usuario

Circutor

Circutor ePARK M-S2 Manual de usuario

Circutor

Circutor URBAN M11 Manual de usuario

Circutor

Circutor Raption 150 Series Manual de usuario

Circutor

Circutor Raption 150 Series Manual de usuario

Circutor

Circutor URBAN Manual de usuario

Circutor

Circutor Raption 50 Series Manual de usuario

Circutor

Circutor URBAN WB DC Series Manual de usuario

Circutor

Circutor Wallbox eNext Series Manual de usuario

Circutor

Circutor Raption 150C Series Manual de usuario

Circutor

Circutor Raption Series Manual de usuario

Circutor

Circutor Raption 50 HV Manual de usuario

Circutor

Circutor URBAN Series Manual de usuario

Circutor

Circutor Wallbox ePark Series Manual de usuario

Circutor

Circutor Wallbox eNext Series Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario