Chore-Time H2 Guía de configuración

MODEL H2™ Feeding System

Installation and Operators Manual

MF830EJuly 2023

Chore-Time Warranty MODEL H2™ Feeding System

2MF830E

CTB, Inc., (“Chore-Time”), warrants each new CHORE-TIME®product manufactured by it to be free from

defects in material or workmanship for one-year from and after the date of initial installation by or for the original

purchaser. If such a defect is found by Chore-Time to exist within the one-year period, Chore-Time will, at its

option, (a) repair or replace such product free of charge, F.O.B. the factory of manufacture, or (b) refund to the

original purchaser the original purchase price, in lieu of such repair or replacement. Labor costs associated with

the replacement or repair of the product are not covered by the Manufacturer.

Additional extended warranties for the equipment and/or systems listed below are provided to the original

purchaser as follows (for all other CHORE-TIME®products purchased, the one-year warranty period shall

apply):

1. TURBO®and RLXfans, less motors - 3 years

2. TURBO®fan fiberglass housings, polyethylene cones, and cast aluminum blades - for the life of the product

3. TURBO®fan motors and bearings - 2 years

4. TURBO®fan components (including plastic shutters) - 3 years

5. Poultry feeder pans that becomes unusable within five years from the date of installation - Warranty prorated

after three years usage

6. Rotating centerless augers, excluding applications involving high moisture feed stuffsv(exceeding 18%), for

ten years from the date of installation. Note: MULTIFLO®and applications involving high moisture feed

stuffs are subject to a one-year warranty

7. Chore-Time manufactured roll-formed steel auger tubes for ten years from the date of installation

8. ULTRAFLO®Breeder Feeding System auger and feed trough are warranted for a period of five years from

the date of original installation against repeated breakage of the auger or wear-through of the feed trough

caused solely by the auger

9. ULTRAPAN®Feeding System augers are warranted for a period of five years from the date of installation againstlely

by the auger

Chore-Time Warranty

MODEL H2™ Feeding System Chore-Time Warranty

MF830E 3

CONDITIONS AND LIMITATIONS

1. The product must be installed by and operated in accordance with the instructions published by the

Manufacturer or Warranty will be void.

2. Warranty is void if all components of the system are not original equipment supplied by the

Manufacturer.

3. This product must be purchased from and installed by an authorized distributor or certified

representative thereof or the Warranty will be void.

4. Malfunctions or failure resulting from misuse, abuse, negligence, alteration, accident, or lack of

proper maintenance shall not be considered defects under the Warranty.

5. This Warranty applies only to systems for the care of poultry and livestock. Other applications in

industry or commerce are not covered by this Warranty.

Chore-Time shall not be liable for any consequential or special damage which any purchaser may suffer or claim

to suffer as a result of any defect in the product. “Consequential” or special damages” as used herein include, but

are not limited to, lost or damaged products or goods, costs of transportation, lost sales, lost orders, lost income,

increased overhead, labor and incidental costs and operational inefficiencies.

THIS WARRANTY CONSTITUTES THE MANUFACTURER’S ENTIRE AND SOLE WARRANTY AND

THIS MANUFACTURER EXPRESSLEY DISCLAIMS ANY AND ALL OTHER WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, EXPRESS AND IMPLIED WARRANTIES AS TO

MERCHANTIBILITY, FITNESS FOR PARTICULAR PURPOSES SOLD AND DESCRIPTION OR

QUALITY OF THE PRODUCT FURNISHED HEREUNDER.

Chore-Time Distributors are not authorized to modify or extend the terms and conditions of this Warranty in any

manner or to offer or grant any other warranties for Chore-Time products in addition to those terms expressly

stated above.

An officer of CTB, Inc. must authorize any exceptions to this Warranty in writing. Chore-Time reserves the right

to change models and specifications at any time without notice or obligation to improve previous models.

Effective: July 2023

CTB, Inc.

PO Box 2000

Milford, Indiana 46542-2000 USA

Phone (574) 658-4101

Email: choretime@choretime.com

Internet: www.choretime.com

Thank You

The employees of Chore-Time would like to thank your for your recent Chore-Time purchase. If a problem should

arise, your Chore-Time distributor can supply the necessary information to help you.

*Chore-Time Poultry Feeder Pan Pro Rata Schedule

Year from date of installation during which pan becomes unusable Charge to be paid by the purchaser for replacement.

0 - 1 years NO CHARGE

1 - 2 years NO CHARGE

2 - 3 years NO CHARGE

3 - 4 years 4/10 of then current list price

4 - 5 years 5/10 of then current list price

Contents

Topic Page

MF830E

Chore-Time Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Follow Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Decal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

DANGER: Moving Auger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

DANGER: Electrical Hazard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CAUTION: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

MODEL H2™ Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Manufacturer’s Recommendations: Birds per Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Glossary of Terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Planning the Floor Feeding System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

General Installation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Laying out the Suspension System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Suspension System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Power Lift Winch Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Installing the Main Winch Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Screw Hook Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Ceiling Hook Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Drop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Hopper Assembly Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

200# Hopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

100# Hopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Feeder Line Assembly & Suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Feeder Pan Assembly Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Feeder Pan and Tube Assembly Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Assemble and Suspend the Feeder Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Installing the End Control, Boot Assembly, and Auger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Auger Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Auger Brazing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Anti-Roost Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Mid-Line Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Meal-Time Feeding Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Controlling the Feeders (optional equipment). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Contents - continued

Topic Page

MF830E 5

General Management & Start-Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Initial Start-up of the Feeding System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

End Control and Mid Line Control Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Electro-guard Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Feeders with Flood Collars:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Feeders with Feed Chutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Feeders without Feed Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Floor Feeding System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Gear Head Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Mechanical Switch Adjustment procedure for Control Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Feeder Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Power Lift Winch Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Agri-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Trouble Shooting the Floor Feeding System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

End & Mid-Line Control Wiring Diagrams: Single Phase(ø) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

End & Mid-Line Control Wiring Diagrams: Three Phase(ø) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Parts Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

200# Hopper Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

100# Hopper Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Hopper Mount Bracket (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Single Boot Components Part No. 6822 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Twin Boot Components Part No. 6824. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Feeder Line Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Power Unit Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Power Unit Assembly Part Numbers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Model H2 End Control-Single Phase: 24397 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Model H2 End Control-Three Phase: 27762 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Model H2 Mid-Line Control-Single Phase: 25435. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Model H2 Mid-Line Control-3 Phase: 27760. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Winch (part no. 47687) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Miscellaneous Suspension Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

MODEL H2 Feeder Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

About This Manual MODEL H2™ Feeding System

6MF830E

The intent of this manual is to help you in two ways. One is to follow step-by-step in the order of assembly of your

product. The other way is for easy reference if you have questions in a particular area.

Important: Read ALL instructions carefully before starting construction.

Important: Pay particular attention to all SAFETY information.

• Metric measurements are shown in millimeters and in brackets, unless otherwise specified. “ " ” equals inches

and “ ' ” equals feet in English measurements.

Examples:

1" [25.4]

4' [1 219]

• Optional equipment contains necessary instructions for assembly or operation.

• Very small numbers near an illustration (i.e., 1257-48) are identification of the graphic, not a part number.

Note: The original, authoritative version of this manual is the English version produced by CTB, Inc. or any of its subsidiaries or divisions,

(hereafter collectively referred to as "CTB"). Subsequent changes to any manual made by any third party have not been reviewed nor

authenticated by CTB. Such changes may include, but are not limited to, translation into languages other than English, and additions to or

deletions from the original content. CTB disclaims responsibility for any and all damages, injuries, warranty claims and/or any other claims

associated with such changes, inasmuch as such changes result in content that is different from the authoritative CTB-published English

version of the manual. For current product installation and operation information, please contact the customer service and/or technical

service departments of the appropriate CTB subsidiary or division. Should you observe any questionable content in any manual, please

notify CTB immediately in writing to: CTB Legal Department, P.O. Box 2000, Milford, IN 46542-2000 USA.

Caution, Warning and Danger Decals have been placed on the equipment to warn of potentially dangerous

situations. Care should be taken to keep this information intact and easy to read at all times. Replace missing or

damaged safety decals immediately.

Using the equipment for purposes other than specified in this manual may cause personal injury and/or damage to

the equipment.

Safety–Alert Symbol

This is a safety–alert symbol. When you see this symbol on your equipment, be alert to the

potential for personal injury. This equipment is designed to be installed and operated as safely

as possible...however, hazards do exist.

Understanding Signal Words

Signal words are used in conjunction with the safety–alert symbol to identify the severity of the warning.

DANGER indicates an imminently hazardous situation which, if not avoided, WILL result in death or

serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, COULD result in death or

serious injury.

CAUTION indicates a hazardous situation which, if not avoided, MAY result in minor or moderate

injury.

About This Manual

Safety Information

MODEL H2™ Feeding System Safety Instructions

MF830E 7

Follow Safety Instructions

Carefully read all safety messages in this manual and on your equipment safety signs. Follow recommended

precautions and safe operating practices.

Keep safety signs in good condition. Replace missing or damaged safety signs.

Decal Descriptions

DANGER: Moving Auger

This decal is placed on the Panel Weldment.

Severe personal injury will result, if the electrical power is not

disconnected, prior to servicing the equipment.

DANGER: Electrical Hazard

Disconnect electrical power before inspecting or servicing equipment

unless maintenance instructions specifically state otherwise.

Ground all electrical equipment for safety.

All electrical wiring must be done by a qualified electrician in accordance

with local and national electric codes.

Ground all non-current carrying metal parts to guard against electrical

shock.

With the exception of motor overload protection, electrical disconnects and

over current protection are not supplied with the equipment.

CAUTION:

Use caution when working with the Auger—springing Auger may cause personal

injury.

Safety Instructions

Manboot 3/98

General MODEL H2™ Feeding System

8MF830E

Information

The Chore-Time MODEL H2™ Feeding System has been designed to feed broilers from day old though grow-

out, and turkeys from day old through 8 weeks.

The H2 Feeders with Feed Windows are specifically designed to fill the feeder pan with feed while the birds are

very young. This insures the birds know where to get feed and have easy access to it.

Using this equipment for any other purpose or in a way not within the operating recommendations specified in this

manual will void the warranty and may cause personal injury.

This manual is designed to provide comprehensive planning and installation information. The Table of Contents

provides a convenient overview of the information in this manual.

MODEL H2™ Features

The Model H2 Feeder is available with Feed Chutes. This feature

allows easy filling of the Feeder Pan when birds are very young.

Recommended usage: Broilers & Turkeys

The Model H2 Feeder is available without feed windows for use at the

grow-out end of a house.

Recommended usage: Broilers & Turkeys

The Model H2 Feeder is available with a Flood Collar. This feature

allows easy flooding of the Feeder Pans when birds are very young.

Recommended usage: Broilers

General

Figure 1. Model H2 with Feed Chutes

Figure 2. Model H2 without

Feed Windows

Figure 3. Model H2 with Flood Collar

MODEL H2™ Feeding System General

MF830E 9

The windows in the feeders may be closed to reduce the amount of feed into the feeder pan.

The H2 Feeder Pans have the ability to swing down to facilitate wasy

cleaning without needing to fully remove the feeder pans see figure 4.

Figure 5 shows the Pan Adjustment Tab numbers. Adjusting the H2 Feeder

Pan to different settings shanges the feed level in the pan. Chore-Time

recommends starting out broilers at setting #2 and turkeys at setting #4.

If the feeder pans do require adjustment, gently pull the pan away from on to

the stuts to release. Reset the pan in the other two struts. Gently, pull the pan

into the appropriate setting on the third strut.

Refer to the Section for additional operation recommendations.

Figure 4. Hanging Feeder Pans

Figure 5. Pan Adjustment

General MODEL H2™ Feeding System

10 MF830E

Manufacturer’s Recommendations: Birds per Pan

*Notice: Please be advised that the maximum number of birds that may be successfully produced per

feed pan may vary based upon such factors as climate, housing type or style, bird breeds, genetic

factors of the birds at issue, grower management practices, etc. All other environmental and

management circumstances, such as proper bird density per house, access to adequate nutrients in feed,

access to adequate water supply, proper ventilation, adequate health care for the birds, and other similar

factors, must meet industry standards and recommendations, if any, of applicable bird breeder

companies.

* NOTICE: The above Manufacturer’s recommendations do not constitute a product warranty and are

in no way to be considered as a guarantee of performance for poultry production. In addition, the above

information in no way alters or revises the terms and conditions of any applicable Chore-Time

manufacturer’s warranty.

Type Max weight and/or

weeks of age

Feeders Number of birds/pan

Broiler 4.5lbs/2kg. Revolution 12, Models C2

Plus, C2Plus S, C, H2, H2 Plus

60 - 90

Broiler 7lbs/3.1kg Revolution 8, C2 Plus, C2 Plus

S, G Plus, G Plus S, C, H2, H2

Plus

55 - 75

Broiler 9lbs/4.0kg Revolution 8, G Plus, G Plus

45 – 65

Broiler Breeder Pullet – rearing 0 – 18 weeks C2 Plus (Breeder),

C2 Plus S (Breeder)

14 - 15

Broiler Breeder Pullet –rearing 0 – 18 weeks

Hi-Yield

C2 Plus (Breeder),

C2 Plus S (Breeder)

12-14

Broiler Breeder Male –rearing 0 -- 18 weeks C2 Plus (Breeder), C2 Plus S

(Breeder), G Plus (Breeder), G

Plus s (Breeder)

11-13

Broiler Breeder Layer 17 + weeks C2 Plus (Breeder),

C2 Plus S (Breeder)

13 - 14

Broiler Breeder Layer 17 + weeks

Hi-Yield

C2 Plus (Breeder),

C2 Plus S (Breeder)

12 - 13

Broiler Breeder Male 17 + weeks G Plus (Breeder), G Plus S

(Breeder)

8-10

Commercial Layer Pullet –

rearing

0 – 20 weeks Revolution 12, C2Plus, H2, H2

Plus

40-60

Commercial Layer 18 + weeks Revolution 12, C2 Plus, C, H2,

H2 Plus

30 - 40

Turkey Poult 0 – 5 weeks Revolution 8, H2 Plus, H2, G

Plus, G Plus S

60 - 65

Turkey Poult 0 – 10 weeks Revolution 8, G Plus, H2 Plus,

40 - 50

Turkey Female 5 + weeks ATF, ATF Plus 60

Turkey Male 5 + weeks ATF Plus 40 - 50

Ducks 0 – 3 weeks G Plus, G Plus S 60 - 70

Ducks 4 – 8 weeks G Plus, G Plus S 50 - 60

Tabla de contenidos

Otros manuales de Maquinaria agrícola de Chore-Time

Chore-Time

Chore-Time Konavi Pullet Feeding System Guía de configuración

Chore-Time

Chore-Time ATF Guía de configuración

Chore-Time

Chore-Time 55 Manual de usuario

Chore-Time

Chore-Time Turbo-Cool Especificaciones

Chore-Time

Chore-Time C Manual de usuario

Chore-Time

Chore-Time 75 Manual de usuario

Chore-Time

Chore-Time 75 Especificaciones

Chore-Time

Chore-Time REVOLUTION 8 Guía de configuración

Chore-Time

Chore-Time 108 FLEX-AUGER Guía de configuración

Chore-Time

Chore-Time H2 PLUS Especificaciones

Chore-Time

Chore-Time C2 PLUS Guía de configuración

Chore-Time

Chore-Time G PLUS Guía de configuración

Chore-Time

Chore-Time REVOLUTION Guía de configuración

Chore-Time

Chore-Time Chore-Tronics 2 Manual de usuario

Chore-Time

Chore-Time 55 Instrucciones de funcionamiento

Chore-Time

Chore-Time Hopper 56284 Guía de configuración

Chore-Time

Chore-Time KONAVI Guía de configuración

Chore-Time

Chore-Time 108 FLEX-AUGER Manual de usuario

Chore-Time

Chore-Time Auger Connector Manual de usuario

Chore-Time

Chore-Time TURBO-COOL 46963 Manual de usuario

Chore-Time

Chore-Time REVOLUTION 8 Guía de configuración

Chore-Time

Chore-Time ULTRAFLO Series Especificaciones

Chore-Time

Chore-Time LIBERTY Feeding System Guía de configuración

Chore-Time

Chore-Time Control Manual de usuario

Manuales populares de Maquinaria agrícola de otras marcas

GSi

GSi PNEG-2314 Manual de usuario

Checchi & Magli

Checchi & Magli TEXDRIVE Manual de usuario

Amazone

Amazone Cenius 4003-2TX Manual de usuario

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manual de usuario

Cima

Cima BLITZ Instrucciones de funcionamiento y mantenimiento

Amazone

Amazone CombiDisc 3000 Instrucciones de instalación

HE-VA

HE-VA Disc-Roller XL Contour Manual de usuario

AGT

AGT AGT-SSFM Manual de usuario

Milestone

Milestone 72-84 Manual de usuario

KUHN

KUHN Hector 3000 Manual de usuario

Krone

Krone X-Disc 6200 Manual de usuario

Eliet

Eliet DZC450 Manual de usuario

Taarup

Taarup BIO+ B4000 Manual de usuario

Garland

Garland SHAKER 310 DPG Manual de usuario

stable comfort

stable comfort StableWall System Manual de usuario

Raven

Raven AccuBoom Manual de usuario

International

International 710 Manual de usuario

Ashland

Ashland HDW-3217-14 Manual de usuario