Charder MS 2100 Manual de usuario

Manufactured by:

Charder Electronic Co., Ltd.

No.103, Guozhong Rd, Dali Dist.

Taichung City 412, Taiwan (R.O.C.)

IN-0933 [5005F] 04/ 2016

MS 2100 -

veterinary scale

USER MANUAL

Please keep the instruction manual at hand all the time for future reference.

TABLE OF CONTENTS

PREFACE................................................................................................. 2

GENERAL INFORMATION .................................................................... 2

SAFETY INSTRUCTION ........................................................................ 2

ENVIROMENTAL ................................................................................... 3

CLEANING.............................................................................................. 3

MAINTENANCE ..................................................................................... 3

WEIGHING OPERATION ....................................................................... 4

WARRANTY-LIABILITY........................................................................ 4

DISPOSING OF THE SCALE.................................................................. 5

SPECIFICATIONS ................................................................................... 6

KEY FUNCTIONS................................................................................... 7

POWER SUPPLY..................................................................................... 8

HOW TO SWITCH ON THE SCALE....................................................... 8

ERROR MESSAGE.................................................................................. 9

ERROR MESSAGE

3. UNDER ZERO

If zero count is below the setting range, the

display will show “Errl” message. The scale

will turn off in 30 seconds if the status

continues.

4. OVERLOAD

If the total load exceeds the maximum capacity

of the scale, the display will show “Err”

message. The weight must be removed

immediately from the surface.

2. OVER ZERO

If zero count is higher than the setting range,

the display will show“Err” message. The scale

will turn off in 30 seconds if the status

continuous.

1. LOW BATTERY

If battery is discharged, the display will show

LOW. The operator should replace the

battery.

PREFACE

Thank you for choosing CHARDER MEDICAL product. All features of this

product were designed to state of the art and are optimized for simple and

straightforward use. If you have any queries or experience any problems

not addressed in the operating instructions, please contact your

CHARDER MEDICAL service partner, or visit us on the Internet at

www.chardermedical.com

GENERAL INFORMATION

We strongly recommend you use the scales on flat and hard surface. Any

soft surface, like carpet will cause inaccuracy.

SAFETY INSTRUCTION

Before putting the device into use, please read with care the

information given in the Operating Instructions. They contain important

instructions for installation, proper use and maintenance of the device.

The manufacturer shall not be liable for damages arising out of failure to

heed the following instructions:

When using electrical components under increased safety requirements,

always comply with the appropriate regulations.

Improper installation will render the warranty null and void.

Ensure the voltage marked on the power supply unit matches your mains

power supply.

This device is designed for use indoors.

Observe the permissible ambient temperatures for use

The device meets the requirements for electromagnetic compatibility. Do

not exceed the maximum values specified in the applicable standards.

If you have any problem, contact your local CHARDER MEDICAL service

partner.

ENVIROMENTAL

All batteries contain toxic compounds; disposal of batteries should be

delegated to a competent organisation, complying with the deposit of

Poisonous Waste Regulation 1972.

Please do not incinerate batteries.

The optimum operating temperature for the scale is 5℃to +35℃; although

it will operate at higher and lower temperatures the scales battery life will

be adversely effected.

CLEANING

We would recommend using alcohol based wipes or similar when cleaning

the scales.

Please do not use large amounts of water when cleaning the scales as this

will cause damage to the scales electronics, you should also refrain from

using corrosive liquids or high pressure washers.

Always disconnect the scales from the mains power supply before

cleaning.

MAINTENANCE

The scale does not require any routine maintenance. However, we

recommend checking the scale’s accuracy at regular intervals. The

regularity of these checks is dependent on the level of use and the state of

the scale. If any inaccuracies occur, please contact your local dealer or

CHARDER MEDICAL service partner.

POWER SUPPLY

The MS 2100 uses 9V alkaline battery or AC adapter as its power supply.

CAUTION: always connect the AC adapter to the MS 2100 before

connecting to the mains power supply. Disconnect from the mains power

supply before disconnecting the adapter from the MS 2100.

HOW TO SWITCH ON THE SCALE

Switching on the scale by pressing button ON/OFF.

Scale is ready for use when LCD shows “8888” and then “0.00”

To ensure correct weighing

1. Place the scale on stable, level surface.

2. Place an animal on platform and press hold.

3. Wait briefly until the weight shown on the display.

4. You will acquire the weight of animal.

KEY FUNCTIONS

KEYS

ON/TARE/OFF

1. Press to switch on the scale.

2. Press to tare the weight of subject and acquire net weight.

kg/lb

1. Press to switch between kg or lb.

HOLD

1. Press to lock the weight.

2. Press HOLD key again to release and disable the function.

WEIGHING OPERATION

Before reading detailed instructions on how to use all the weighing

functions that are built into your scale, please read the following important

guidelines:

Always be sure that the display shows `Zero` before use, if it does not then

please press the ZERO key.

The Professional Medical scale is designed to detect when a stable weight

is achieved, the indicator will `bleep` twice to indicate a stable weight value,

your reading should be taken at this point.

WARRANTY-LIABILITY

If a fault or defect is present on receipt of the unit which is within

CHARDER MEDICAL’s scope of responsibility, CHARDER shall have the

right to either repair the fault or supply a replacement unit. Replaced parts

shall be the property of CHARDER. Should the fault repairs or replacement

delivery not be successful, the statutory provisions shall be valid. The

period of warranty shall be two years, beginning on the date of purchase.

Please retain your receipt as proof of purchase. Should your scale require

servicing, please contact your dealer or CHARDER MEDICAL Customer

Service.

No responsibility shall be accepted for damage caused through any of the

following reasons: Unsuitable or improper storage or use, incorrect

installation or commissioning by the owner or third parties, natural wear,

changes or modifications, incorrect or negligent handling , overuse,

chemical, electrochemical or electrical interference or humidity, unless this

is attributable to negligence on the part of CHARDER MEDICAL.

If operating, climatic or any other influences lead to a major change in

conditions or material quality, the treaty for perfect unit functioning shall be

rendered null and void. If CHARDER provides and individual warranty, this

means that the unit supplied will be free of faults for the length of the

warranty period.

DISPOSING OF THE SCALE

This product is not to be treated as regular household waste, but should be

handed in to an electrical/electronic equipment recycling centre.

You can obtain further details from your local council, your municipal

waste disposal company or the firm which you purchased the product.

SPECIFICATIONS

Model # MS 2100

Maximum

Capacity

44 lb / 20 kg

Readability ½ oz / 10 g

Accuracy

±1oz / ±20g

Weighing Unit lb / kg

Power Supply 9V alkaline battery

9V -12V AC adapter

Dimension 520 * 300mm

LCD Display 1.0” LCD display with 4 active digits

Tray Stainless Steel Platform

Operating

Temperature 5°C / 35°C

Keys kg/lb, ON/TARE/OFF, HOLD

Tabla de contenidos

Otros manuales de Escala de Charder

Charder

Charder MHS2710 Manual de usuario

Charder

Charder R260 Manual de usuario

Charder

Charder MS5410 Manual de usuario

Charder

Charder MBF6000 Manual de usuario

Charder

Charder MS-3500 Manual de usuario

Charder

Charder MS 5460 Manual de usuario

Charder

Charder MS3450 Manual de usuario

Charder

Charder MS3830 Manual de usuario

Charder

Charder P520 Manual de usuario

Charder

Charder MS-6121R Manual de usuario

Charder

Charder MS4970 Manual de usuario

Charder

Charder MS5461 Manual de usuario

Charder

Charder MHS2510/2610 Manual de usuario

Charder

Charder MS7301 Manual de usuario

Charder

Charder MS2510 Manual

Charder

Charder MS4200 Manual de usuario

Charder

Charder MS 5900 Manual de usuario

Charder

Charder MS 6000 Manual de usuario

Charder

Charder MS 6111 Manual de usuario

Charder

Charder R250 Series Manual de usuario

Charder

Charder W320 Manual de usuario

Charder

Charder MS5810 Manual de usuario

Charder

Charder W310 Manual de usuario

Charder

Charder MS 2400 Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario