Channel Vision 6535 Manual de usuario

6535

1080P 2 Megapixel Mini Dome IP Camera w/POE

IR LEDs & Two Way Audio

• Intelligent Entertainment • Infrastructure • Security Solutions

Table Of Contents

Introduction ................................................................................ Page 3

Safety Warnings.......................................................................... Page 4

Cable Pin Out.............................................................................. Page 5

Camera Assembly....................................................................... Page 6

IP Setup....................................................................................... Page 7-13

Configuring Internet Explorer....................................................... Page 14 Live

Viewing........................................................................................ Page 15-16

Configuration............................................................................... Page 17

System Configuration.................................................................. Page 18

User Management....................................................................... Page 19

System Update............................................................................ Page 20

Network....................................................................................... Page 21-25

ONVIF ........................................................................................ Page 26

Video Settings............................................................................. Page 27-33

Event List.................................................................................... Page 34-35

Schedule..................................................................................... Page 36

Port Forwarding......................................................................... Page 37

UPNP Port Forwarding............................................................... Page 38

Factory Reset............................................................................. Page 39

Specifications............................................................................. Page 40

Warranty...................................................................................... Page 41

The 65 is a

Built-in web server allows a user to view high quality, real-time video with Internet Explorer browser.

Multi-Stream H.264, MJPEG and MPEG

Live video can be recorded to an NVR and played back remotely, as well as viewed from many mobile

phones and other devices.

Designed for large commercial projects with 100’s of cameras or a single family house requiring a camera at

the front door.

Android, iPhone & iPad app available from the respective store

2.8mm fixed focal length lens

36 Camera CMS (Central Management software, included) will allow you to see all of your cameras

anywhere in the world in multiple locations at the same time

High definition 1080P at 30FPS

Digital Wide Dynamic Range

Power Over Ethernet or 12vDC power supply

Two Way Audio

Micro SD card recording slot inside camera

6535 Features:

Channel Vision’s 6535 IP mini dome camera offers superior image quality with a 2 megapixel CMOS sensor

and has the ability to capture images up to 1920 x 1080 pixels.

With H.264 compression, less bandwidth and storage space are used, while delivering full resolution at max

frame rate with faster speeds over the internet. Monitoring can be done anywhere an internet connection is

available even from a Smart-phone. The 6535 also features event triggered motion recording.

35 1080p 2 Megapixel Mini Dome IP Camera w/POE, IR and Two Way Audio.

Model 6535

6535

Safety Warnings

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions for future reference.

3. Heed all warnings.

4. Follow all instructions.

5. Clean only with a dry cloth.

6. Install in accordance with these instructions.

7 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

that produce heat.

8. Do not defeat the safety purpose of the polarized-type plug. A polarized plug has two blades with

one wider than the other. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete

outlet.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point of exit from the apparatus.

10. Only use attachments/accessories specified by Channel Vision.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the inside of the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

13. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the

user to presence of uninsulated dangerous voltage within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

14. The exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance accompanying the appliance.

15. Inside of apparatus shall not be exposed to dripping or splashing and objects filled with liquids.

CAUTION: To reduce the risk of electric shock,

do not remove the cover (or back). There are no

user-serviceable parts inside, refer servicing to

qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN !

The breakout cable on Channel Vision’s IP Cameras are used for motion detection, event triggering,

alarm notifications etc.

The provided interface connections are explained below.

1. Audio Output ( Audio Out + Ground)

An audio output that can be fed into an amplifier

2. Audio Input

A microphone is built into this IP camera

3. Reset to factory default

To restore your IP camera to Channel Vision default settings, unplug the power supply from the

camera. Then, plug in power cable and press the “reset” button on the camera for 30 seconds. Once

30 seconds have passed, remove the electric wire and plug in the Ethernet cable. Use IP installer to

find the camera IP. (Default is http://192.168.1.200) Default username and password is “admin”

Cable Pin Out

PoE (Power Over Ethernet)

Power over Ethernet (PoE) is a technology that integrates power into a standard LAN infrastructure. It

enables power to be provided to the network device, such as an IP phone or a network camera, using

the same cable that is used for the network connection.

The PoE switch eliminates the need for power outlets at the camera locations and enables an easier

application of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7 days a week operation.

The recommended requirement for a PoE switch is 802.3at, 30.0W.

The minimum requirement for a PoE switch is 802.3af 15W.

If using a PoE switch that does not meet these specifications, full functionality may not be supported.

WARNING: DO NOT CUT THE BREAKOUT CABLE.

CUTTING THE CABLE WILL VOID THE WARRANTY ON THE DEVICE.

To access the micro

SD card slot and

reset button, remove

the camera cover.

Camera Assembly

Pop out the plastic tab to run your wires through the hole.

Use screws to mount the bottom of camera to the ceiling or the wall. After adjusting the lens, tighten the

screws.

Your IP Camera comes set to DHCP by default. This means that, just like your laptop computer or desktop PC, an IP

address is automatically assigned to the IP camera by your router. This, combined with UPnP (Universal Plug and

Play), will make the IP setup of the IP camera a quick and easy task to accomplish.

*For the best security, Channel Vision recommends you use a static IP setting and standard port forwarding.

1. Open IP installer. This is located on your software disk.

2. An IP address should already be assigned

In the example below, the router has assigned 192.168.1.199 to the IP Camera

3. Double click on the name of the IP Camera. This will open the IP camera in your default browser

Option One: Assigning an IP Address (DHCP)

Connecting To The IP Camera (DHCP)

5. The first time you connect to the camera via Internet Explorer, it will ask you to install the ActiveX control.

Internet Explorer 6, 7, 8, or 9 must be used to run this ActiveX control.

4. You will be prompted for a username and password.

The default username is ‘admin’

The default password is ‘admin’

Installing The ActiveX Control

1. Use the software, “IP Installer” to assign the IP address to your IP Camera.

You can find "IP Installer" in the supplied CD.

2. Execute IP Installer, located on your disk under the folder “Software”

3. If Windows prompts you to unblock IP Installer, you must select “unblock”

There are 3 options of IP configuration:

A. Fixed IP (Public IP or Virtual IP)

B. DHCP (Dynamic IP)

C. Dial-up/DSL (PPPoE)

"IP Installer" will search all IP Cameras connected to your LAN network.The user can

click “Search Device” to search again.

Double click the camera name to go directly to the camera

Option Two: Assigning an IP Address (Static)

Assigning an IP Address (Static) /cont

4. Click the start icon on your computer.

5. Type the word “run” and select enter on your keyboard.

6. Type in ‘cmd’ and press enter on your keyboard, or press ok.

7. Type in ‘ipconfig /all’ into the DOS prompt that appears. Press “Enter”.

8. Write down your computer’s IP address.

Do not use the same IP address as the computer in the IP Camera.

In the example below, the computer’s IP address is 192.168.1.74.

The IP address of the IP camera must be different than the IP address in the computer.

Each network-able device in your network has an IP address assigned.

The IP chosen for your IP Camera is not the same address as any other device on your network.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Channel Vision

Channel Vision

Channel Vision 6125 Manual de usuario

Channel Vision

Channel Vision 6117 Manual de usuario

Channel Vision

Channel Vision 6401 Manual de usuario

Channel Vision

Channel Vision 6144 Manual de usuario

Channel Vision

Channel Vision 6810 Manual de usuario

Channel Vision

Channel Vision 6010 Manual de usuario

Channel Vision

Channel Vision 6125 Manual de usuario

Channel Vision

Channel Vision 6115 Manual de usuario

Channel Vision

Channel Vision 6710 Manual de usuario

Channel Vision

Channel Vision 6333-O Manual de usuario

Channel Vision

Channel Vision 6405 Manual de usuario

Channel Vision

Channel Vision 6533 Manual de usuario

Channel Vision

Channel Vision 6010 Manual de usuario

Channel Vision

Channel Vision 6105 Manual de usuario

Channel Vision

Channel Vision 6010-B Manual de usuario

Channel Vision

Channel Vision 6325-S Manual de usuario

Channel Vision

Channel Vision 6821-0 Manual de usuario

Channel Vision

Channel Vision 6330 Manual de usuario

Channel Vision

Channel Vision 6332-0 Manual de usuario

Channel Vision

Channel Vision 6200 Series Manual de usuario

Channel Vision

Channel Vision 5102-FMC-II Manual de usuario

Channel Vision

Channel Vision 6127 Manual de usuario

Channel Vision

Channel Vision 6531 Manual de usuario

Channel Vision

Channel Vision 6005 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario