Central Pneumatic 68247 Instrucciones de montaje
!"#$%
&'(')*+,-*./0(')/*1)2*3))4255...631-0+-7-/'83)69+:
;:1'<*+,-*)/93='91<*(,44+-)*1)2*4-+>,9)(,44+-)?31-0+-7-/'83)69+:
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20k
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6 Item 68247
GH@;IJ KL;MHINKO PHNOI;OHOQ;NOGIHRRHINKO
I10</*+7*Q+=)/=)(
Safety ......................................................... 2
Installation .................................................. 4
Specifications ............................................. 4
Operation .................................................... 8
Maintenance ............................................... 8
Parts List and Diagram .............................. 10
Warranty .................................................... 12
SHMONOT*GJPUKRG*HOV*V;@NONINKOG
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
NPLKMIHOI*GH@;IJ*NO@KMPHINKO
T/=/-1<*G17/)W*S1-='=8(
* SHMONOT*M/1>*1<<*(17/)W*.1-='=8(*1=>*'=()-,9)'+=(6***
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
G1X/*1<<*.1-='=8(*1=>*'=()-,9)'+=(*7+-*7,),-/*-/7/-/=9/6
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
1. S+-Y*1-/1*(17/)W
a. Z//4*.+-Y*1-/1*9</1=*1=>*./<<*<')6
Cluttered or dark areas invite accidents.
b. Z//4*93'<>-/=*1=>*0W()1=>/-(*1.1W*
7-+:*1=*+4/-1)'=8*-/8,<1)+-6
2. L/-(+=1<*(17/)W
a. G)1W*1</-)B*.1)93*.31)*W+,*1-/*>+'=8*1=>*
,(/*9+::+=*(/=(/*.3/=*+4/-1)'=8*)3'(*
-/8,<1)+-6**V+*=+)*,(/*)3'(*-/8,<1)+-*.3'</*
W+,*1-/*)'-/>*+-*,=>/-*)3/*'=7<,/=9/*+7*
>-,8(B*1<9+3+<*+-*:/>'91)'+=6 A moment
of inattention while operating a regulator
may result in serious personal injury.
b. [(/*4/-(+=1<*4-+)/9)'X/*/A,'4:/=)6**
H<.1W(*./1-*HOGND144-+X/>*/W/*
4-+)/9)'+=*>,-'=8*(/),4*1=>*,(/6
Page 3@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6Item 68247
GH@;IJKL;MHINKOPHNOI;OHOQ; NOGIHRRHINKO
3. M/8,<1)+-*,(/*1=>*91-/
a. G)+-/*1=*'></*-/8,<1)+-*+,)*+7*)3/*
-/193*+7*93'<>-/=*1=>*>+*=+)*1<<+.*
4/-(+=(*,=71:'<'1-*.')3*)3/*-/8,<1)+-*
+-*)3/(/*'=()-,9)'+=(*)+*+4/-1)/*')6
b. P1'=)1'=*)3/*-/8,<1)+-6**Z//4*)3/*-/8,<1)+-*
9</1=*7+-*0/))/-*1=>*(17/-*4/-7+-:1=9/6**
@+<<+.*'=()-,9)'+=(*7+-*<,0-'91)'=8*
1=>*931=8'=8*199/((+-'/(6**Z//4*>-WB*
9</1=*1=>*7-//*7-+:*+'<*1=>*8-/1(/6**
Q3/9Y*7+-*:'(1<'8=:/=)*+-*0'=>'=8*+7*
:+X'=8*41-)(B*0-/1Y18/*+7*41-)(*1=>*
1=W*+)3/-*9+=>')'+=*)31)*:1W*177/9)*)3/*
-/8,<1)+-\(*+4/-1)'+=6**N7*>1:18/>B*31X/*
)3/*-/8,<1)+-*-/41'-/>*0/7+-/*,(/6
c. [(/*)3/*-/8,<1)+-*'=*199+->1=9/*.')3*)3/(/*
'=()-,9)'+=(B*)1Y'=8*'=)+*199+,=)*)3/*.+-Y'=8*
9+=>')'+=(*1=>*)3/*.+-Y*)+*0/*4/-7+-:/>6 Use
of the regulator for operations different from those
intended could result in a hazardous situation.
4. G/-X'9/
a. ]1X/*W+,-*-/8,<1)+-*(/-X'9/>*0W*1*
A,1<'7'/>*-/41'-*4/-(+=*,('=8*+=<W*'>/=)'91<*
-/4<19/:/=)*41-)(6 This will ensure that
the safety of the regulator is maintained.
H'-*M/8,<1)+-*G17/)W*S1-='=8(
1. M'(Y*+7*0,-()'=8*D*>+*=+)*1>^,()*-/8,<1)+-*3'83/-*
)31=*:1-Y/>*:1_':,:*4-/((,-/*+7*1))193:/=)6
2. M'(Y*+7*'=^,-W*D*>+*=+)*>'-/9)*1'-*
()-/1:*1)*4/+4</*+-*1=':1<(6
3. V+*=+)*,(/*)+*(,44<W*0-/1)3'=8*1'-6
4. Z//4*-/8,<1)+-*./<<DX/=)'<1)/>6**
V+*=+)*9+X/-*-/8,<1)+-*>,-'=8*,(/6
5. Drain Air Filter daily and after use.
Internal rust causes tank failure and explosion.
6. Do not remove the valve cover or
adjust internal components.
7. Do not use the air hose to move the regulator.
8. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
9. All air line components, including hoses, pipe,
connectors, filters, etc., must be rated for a minimum
working pressure of 160 PSI, or 150% of the
maximum system pressure, whichever is greater.
10. Industrial applications must follow OSHA guidelines.
11. Maintain labels and nameplates on the
regulator. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. This product is not a toy.
Keep it out of reach of children.
13. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
*GH&;*I];G;*NOGIM[QINKOG6
Page 4 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6 Item 68247
GH@;IJ KL;MHINKO PHNOI;OHOQ;NOGIHRRHINKO
G4/9'7'91)'+=(
Operating Pressure 0 -160 PSI
Air Inlet and Outlet Size
Inlet: 1/2″ -14 NPT (female thread)
Outlet: 1/4″ - 18 NPT (male thread)
Features Replaceable air filter element
Filter 40 micron
N=()1<<1)'+=
*M/1>*)3/*;OINM;*NPLKMIHOI*GH@;IJ*NO@KMPHINKO*(/9)'+=*1)*)3/*0/8'=='=8*+7*)3'(*
:1=,1<*'=9<,>'=8*1<<*)/_)*,=>/-*(,03/1>'=8(*)3/-/'=*0/7+-/*(/)*,4*+-*,(/*+7*)3'(*4-+>,9)6
O+)/2 For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
O+)/2 This air tool may be shipped with protective plugs covering the air ports. Remove these plugs before set up.
IK*LM;&;OI*G;MNK[G*NO`[MJ*@MKP*;aLRKGNKO2*
[(/*+=<W*9</1=B*>-WB*-/8,<1)/>B*9+:4-/((/>*1'-*)+*4+./-*)3'(*)++<6***
V+*=+)*,(/*+_W8/=B*91-0+=*>'+_'>/B*9+:0,()'0</*81(/(B**
+-*1=W*+)3/-*0+))</>*81(*1(*1*4+./-*(+,-9/*7+-*)3'(*)++<6
@,=9)'+=(
H'-*N=</)*L+-)
M/8,<1)+-*]1=></
M/8,<1)+-
I1=Y
V-1'=*L<,8
H'-*&1<X/
T1,8/
Page 5@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6Item 68247
GH@;IJKL;MHINKOPHNOI;OHOQ; NOGIHRRHINKO
N=()1<<1)'+=
bU CQ
@'8,-/*H
1. Thread the Regulator Handle into the Air Regulator
only a couple of turns. V+*=+)*)'83)/=*')6**
I'83)/='=8*')*.'<<*(/)*)3/*-/8,<1)+-*)+*3'83*
4-/((,-/B*4+(('0<W*91,('=8*4-+4/-)W*>1:18/*
.3/=*7'-()*9+==/9)'=8*)3/*1'-*(,44<W6
2. Incorporate an in-line shutoff valve, and
quick coupler for best service, as shown on
Figure B on page 6 and Figure C on page 7. *
H=*'=D<'=/*(3,)+77*01<<*X1<X/*'(*1=*':4+-)1=)*
(17/)W*>/X'9/*0/91,(/*')*9+=)-+<(*)3/*1'-*
(,44<W*/X/=*'7*)3/*1'-*3+(/*'(*-,4),-/>6**
I3/*(3,)+77*X1<X/*(3+,<>*0/*1*01<<*X1<X/*
0/91,(/*')*91=*0/*9<+(/>*A,'9Y<W6
O+)/2 Wrap all threaded connectors before
connecting them with pipe thread seal
tape (PTFE) to prevent leaking.
3. Attach an air hose to the compressor’s air outlet.
Connect the air hose to the air inlet of the unit.
O+)/2*Air flow, and therefore tool performance,
can be hindered by undersized air supply components.
The air hose must be long enough to reach
the work area with enough extra length to
allow free movement while working.
4. Check that the regulator handle is loose.
5. Close the in-line shutoff valve between
the compressor and the tool.
6. Turn on the air compressor according to
the manufacturer’s directions and allow it
to build up pressure until it cycles off.
7. Inspect the air connections for leaks.
Repair any leaks found.
H'-*Q+==/9)'+=*G/),4
1. Connect the regulator valve, an inline shut off
valve and a 1/4″ NPT air hose to the Compressor’s
Quick Coupler. The air hose must be long
enough to reach the work area with enough extra
length to allow free movement while working.
O+)/2 H=*'=D<'=/*(3,)+77*01<<*X1<X/*'(*1=*':4+-)1=)*
(17/)W*>/X'9/*0/91,(/*')*9+=)-+<(*)3/*1'-*(,44<W*/X/=*
'7*)3/*1'-*3+(/*'(*-,4),-/>6**I3/*(3,)+77*X1<X/*(3+,<>*
0/*1*01<<*X1<X/*0/91,(/*')*91=*0/*9<+(/>*A,'9Y<W6
2. Depending on the tool that will be used
with this regulator, incorporate additional
components, such as an in-line oiler, a filter,
or a dryer (all sold separately), as shown on
Figure B on page 6 and Figure C on page 7.
Consult air tool’s manual for needed accessories.
Page 6 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6 Item 68247
GH@;IJ KL;MHINKO PHNOI;OHOQ;NOGIHRRHINKO
@'8,-/*U2**L+-)10</*H'-*G,44<W*G/),4
G
A
E
E
H
F
B
Non-lubricated
Tools
Lubricated
Tools
A
B
C
C
DA
V/(9-'4)'+= @,=9)'+=
A Air Hose Connects air to tool
B Filter Prevents dirt and condensation from damaging tool or workpiece
C Regulator Adjusts air pressure to tool
D Lubricator (optional) For air tool lubrication
E Coupler and Plug Provides quick connection and release
F Leader Hose (optional) Increases coupler life
G Air Cleaner / Dryer (optional) Prevents water vapor from damaging workpiece
H Air Adjusting Valve (optional) For fine tuning airflow at tool
Page 7@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6Item 68247
GH@;IJKL;MHINKOPHNOI;OHOQ; NOGIHRRHINKO
@'8,-/*Q2**G)1)'+=1-W*H'-*G,44<W*G/),4
N
L
L O
M
C
C
Non-lubricated Tools
Lubricated
Tools
H
I
I
J
JKH
F
G
E
Slope
F
F
B
B
A
A
CD
V/(9-'4)'+= @,=9)'+=
A Vibration Pads For noise and vibration reduction
B Anchor Bolts Secures air compressor in place
C Ball Valve Isolates sections of system for maintenance
D Isolation Hose For vibration reduction
EMain Air Line - 3/4″ minimum recommended Distributes air to branch lines
F Ball Valve To drain moisture from system
GBranch Air Line -1/2″ minimum recommended Brings air to point of use
H Air Hose Connects air to tool
I Filter Prevents dirt and condensation from damaging tool or workpiece
J Regulator Adjusts air pressure to tool
K Lubricator (optional) For air tool lubrication
L Coupler and Plug Provides quick connection and release
M Leader Hose (optional) Increases coupler life
N Air Cleaner / Dryer (optional) Prevents water vapor from damaging workpiece
O Air Adjusting Valve (optional) For fine tuning airflow at tool
Page 8 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6 Item 68247
GH@;IJ KL;MHINKO PHNOI;OHOQ;NOGIHRRHINKO
K4/-1)'=8*N=()-,9)'+=(
*M/1>*)3/*;OINM;*NPLKMIHOI*GH@;IJ*NO@KMPHINKO*(/9)'+=*1)*)3/*0/8'=='=8*+7*)3'(*
:1=,1<*'=9<,>'=8*1<<*)/_)*,=>/-*(,03/1>'=8(*)3/-/'=*0/7+-/*(/)*,4*+-*,(/*+7*)3'(*4-+>,9)6
M/8,<1)+-*H-/1*G/)*[4
1. Designate a work area that is clean and well-lit.
The work area must not allow access by
children or pets to prevent injury.
2. Locate the Regulator on a flat level surface to
ensure proper pump lubrication and to prevent
damage to the unit. Keep at least 12″ of space
around the unit to allow air circulation.
3. Route the power cord from the regulator to
the grounded wall outlet, along a safe path
without creating a tripping hazard or exposing
the power cord to possible damage.
T/=/-1<*K4/-1)'+=
O+)/2 At the beginning of the day’s first use of the
Air Regulator, check for air leaks by applying soapy
water to connections while the Air Regulator is pumping
and after pressure cut-out. Look for air bubbles. If air
bubbles are present at connections, tighten connections.
Do not use the Air Regulator unless all connections are
air tight, the extra air leaking out will cause the regulator
to operate too often, increasing wear on the regulator.
SHMONOTc IK*LM;&;OI*G;MNK[G*
NO`[MJ*HOV*V;HI]*@MKP*
;aLRKGNKO2
V+*=+)*/_9//>*C!d*LGN
1. Adjust the Regulator Knob (1C) so that the
air output is enough to properly power the
tool, but the output will not exceed the tool’s
maximum air pressure at any time. Turn the
knob clockwise to increase the pressure and
counter-clockwise to decrease pressure. Adjust
the pressure gradually, while checking the
air output gauge (6B) to set the pressure.
2. Make sure the air tool’s throttle or switch is in the
off position. Connect the air tool to the air hose.
3. Open the in-line Shutoff Valve.
4. Use the air tool as needed.
5. After the job is complete, turn the
compressor’s Power Switch OFF.
6. Disconnect the Air Regulator.
7. Close the in-line Shutoff Valve.
8. Bleed air from the tool then disconnect the tool.
9. Drain the Air Filter/Regulator of water daily. With the
unit under pressure, open the Drain Plug (14A) to
expel any accumulated moisture from the Air Filter.
10. Clean, then store the Air Regulator indoors.
P1'=)/=1=9/*1=>*G/-X'9'=8
*L-+9/>,-/(*=+)*(4/9'7'91<<W*/_4<1'=/>*'=*)3'(*:1=,1<*:,()*
0/*4/-7+-:/>*+=<W*0W*1*A,1<'7'/>*)/93='9'1=6
IK*LM;&;OI*G;MNK[G*NO`[MJ*@MKP*HQQNV;OIHR*KL;MHINKO2*
I,-=*)3/*L+./-*G.')93*eK@@f*1=>*,=4<,8*)3/*M/8,<1)+-*7-+:*')(*/</9)-'91<*+,)</)*
0/7+-/*4/-7+-:'=8*1=W*'=(4/9)'+=B*:1'=)/=1=9/B*+-*9</1='=8*4-+9/>,-/(6
IK*LM;&;OI*G;MNK[G*NO`[MJ*@MKP*M;T[RHIKM*@HNR[M;2*
V+*=+)*,(/*>1:18/>*/A,'4:/=)6**N7*10=+-:1<*=+'(/*+-*X'0-1)'+=*+99,-(B*
31X/*)3/*4-+0</:*9+--/9)/>*0/7+-/*7,-)3/-*,(/6
Page 9@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6Item 68247
GH@;IJKL;MHINKOPHNOI;OHOQ; NOGIHRRHINKO
Q</1='=8B*P1'=)/=1=9/B*1=>*R,0-'91)'+=
1. U;@KM;*;HQ]*[G;B inspect the general
condition of the air regulator. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. H@I;M*[G;B wipe external surfaces of
the regulator with a clean cloth.
3. SHMONOTc**N7*)3/*(,44<W*9+->*+7*)3'(*
-/8,<1)+-*'(*>1:18/>B*')*:,()*0/*-/4<19/>*
+=<W*0W*1*A,1<'7'/>*(/-X'9/*)/93='9'1=6
P1'=)/=1=9/*G93/>,</
Following are general guidelines for maintenance checks of the Air Regulator.
O+)/2 The environment in which the regulator is used, and the frequency of use will affect how often
you will need to check the Air Regulator components and perform maintenance procedures.
V1'<W2
a. Make sure all nuts and bolts are tight.
b. Drain moisture from air tank.
c. Check for abnormal noise or vibration.
d. Check for air leaks.*
e. Wipe off any oil or dirt from the regulator.**
* To check for air leaks, apply soapy water to joints while
the Air Regulator is pressurized. Look for air bubbles.
** To clean the regulator surface, wipe with
a damp cloth, using a mild detergent or mild solvent.
S//Y<W2
a. Inspect Air Filter.
g,1-)/-<W*h/X/-W*b*:+=)3(i2
a. Tool Disassembly, Cleaning, and Inspection:
Have the internal mechanism cleaned, inspected,
and lubricated by a qualified technician.
H'-*@'<)/-*P1'=)/=1=9/
Check the Air Filter weekly to see if it needs replacement.
Replace the filter more often if regulator is used in dirty environments.
3. Periodically remove the Filter (6A), rinse
it out with water and put it back in.
4. To access the air filter:
a. Secure the Top Nut (1A) in a vise.
b. Loosen and remove the Bottom Nut (13A).
c. Pull off the Housing (7A), exposing
the Filter Assembly.
d. Disassemble the Filter Assembly. Keep track of
assembly order. (Housing is not shown.)
See Figure D.
5. Remove the Filter.
6. Check that the Large Plate and Cup are in
place, and replace with a new Filter.
7. Reassemble Filter Assembly according to
assembly order described in Figure D.
O+)/2 Retaining Ring should slide on tightly
against the Filter Washer and Filter. If it
is loose, the Filter will not function.
8. Replace the Housing.
O+)/2 Rubber Seals on Nuts and Housing must
be in good condition before reassembly.
9. Thread Bottom Nut back on to Stud. Tighten.
I+4*L<,8
U+))+:*L<,8
R1-8/*L<1)/
Q,4
@'<)/-
@'<)/-*S1(3/-
M/)1'='=8*M'=8
@'8,-/*V*
Page 10 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD"""D"!!DE%F%6 Item 68247
GH@;IJ KL;MHINKO PHNOI;OHOQ;NOGIHRRHINKO
L1-)(*R'()*1=>*V'18-1:
LR;HG;*M;HV*I];*@KRRKSNOT*QHM;@[RRJ
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
L1-)(*R'()*1=>*V'18-1:*H
L1-) V/(9-'4)'+=
1A Top Nut
2A Filter Cap
3A Gasket
4A Large Plate
5A Cup
6A Filter
7A Housing
8A Filter Washer
9A Retaining Ring
10A Stud
11A Gasket
12A Filter Base
13A Bottom Nut
14A Drain Plug
CH
bH
$H
EH
!H
%H
"H
FH
CdH
CCH
C#H
CbH
C$H
#H
H'-*'=</)*
4+-)
M/9+->*L-+>,9)\(*G/-'1<*O,:0/-*]/-/2*
O+)/2 If product has no serial number, record month and year of purchase instead.
O+)/2 Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Specify UPC 193175366740 when ordering parts.
Tabla de contenidos
Otros manuales de Pistola de clavos de Central Pneumatic
Central Pneumatic
Central Pneumatic Contractor 97526 Manual de usuario
Central Pneumatic
Central Pneumatic 97525 Manual de usuario
Central Pneumatic
Central Pneumatic 69927 Manual de usuario
Central Pneumatic
Central Pneumatic 92917 Manual de instalación
Central Pneumatic
Central Pneumatic Contractor 97524 Manual de usuario
Central Pneumatic
Central Pneumatic 46309 Manual de usuario
Central Pneumatic
Central Pneumatic 40115 Manual de usuario
Central Pneumatic
Central Pneumatic 42528 Manual de lista de piezas
Central Pneumatic
Central Pneumatic 41164 Guía de referencia rápida
Central Pneumatic
Central Pneumatic Contractor 97526 Manual de lista de piezas
Central Pneumatic
Central Pneumatic 93257 Manual de usuario
Central Pneumatic
Central Pneumatic 68020 Manual de usuario
Central Pneumatic
Central Pneumatic 41209 Manual de usuario
Central Pneumatic
Central Pneumatic Professional 97512 Manual de usuario
Central Pneumatic
Central Pneumatic 98733 Manual de instalación
Central Pneumatic
Central Pneumatic 93680 Manual de usuario
Central Pneumatic
Central Pneumatic 92359 Manual de usuario
Central Pneumatic
Central Pneumatic 93656 Manual de usuario
Central Pneumatic
Central Pneumatic 68019 Manual de instalación
Central Pneumatic
Central Pneumatic 68027 Manual de usuario
Manuales populares de Pistola de clavos de otras marcas
Black & Decker
Black & Decker 492848-00 Manual de usuario
HOLZMANN MASCHINEN
HOLZMANN MASCHINEN TN90 Manual de usuario
Metabo HPT
Metabo HPT NR 3690DC Manual de instrucciones
Surtek
Surtek CN650 Dimensiones y guía de instalación
Makita
Makita GF600 Manual de usuario
Parkside
Parkside PET 25 B1 Manual de usuario
