Casio QV-5700 - 2 Manual de usuario
DELETING IMAGES
119
DELETING IMAGES
You can delete the currently displayed image, one or more
selected images, all the images in one or more selected fold-
ers, or all the images in the camera’s memory.
IMPORTANT!
• Image deletion cannot be undone. Before deleting an
image, make sure you no longer need it or you have a
back-up copy saved on your computer, on diskette, or
on some other medium. Be especially careful with
“Deleting All Unprotected Images” operation, which
deletes all unprotected images in memory.
• A protected image cannot be deleted. See “Protecting
Images Against Deletion” on page 125 for details on
protecting and unprotecting images.
• Delete operations are disabled when all of the images
on the camera’s memory card are protected.
Deleting the Displayed Image
Use the following procedure when you want to delete the
image that is currently on the monitor screen.
1.
Align the power/function switch with .
2.
Rock the control button to the left or right, or
rotate the selector dial to scroll through im-
ages and display the image you want to delete.
3.
Press AE-L .
4.
In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
• If you change your mind and do not want to delete the
image, select “No” instead.
5.
Click the control button.
• Displaying a panorama or movie image in step 2 of the
above procedure causes all of the images that make
up the panorama or movie to be deleted.
DELETING IMAGES
120
NOTE
• The camera does not maintain open spaces in its
memory. Deleting an image causes images following
the deleted image to be shifted up to fill in the empty
space created by the deletion. Note that images are
renumbered when they are shifted.
Deleting Selected Images
The following procedure lets you select one or more image
for deletion.
1.
Align the power/function switch with .
2.
Press MENU.
3.
Select “Delete” “Select” and then rock the
control button to the right.
4.
Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to delete.
5.
Rock the control button up or down to toggle
the displayed image’s icon on and off.
100-1 100-2 100-3
100-1 100-2
01010001.JPG 01010003.JPG01010002.JPG
01010003.JPG
File Names:
01010001.JPGFile Names:
DELETING IMAGES
121
• Any image marked with the icon is marked for de-
letion. It will be deleted when you perform the next
step of this procedure.
• You can repeat steps 4 and 5 to mark and unmark
multiple images if you want.
6.
Click the control button.
7.
In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
• If you change your mind and want to cancel the delete,
select “No” instead.
8.
Click the control button.
Deleting All Images in Selected Folders
Use the following procedure to select one or more folder for
deletion of all their images.
1.
Align the power/function switch with .
2.
Press MENU.
3.
Select “Delete” “Folder” and then rock the
control button to the right.
4.
Rock the control button to the left or right, or
rotate the selector dial to display the folder
whose images you want to delete.
5.
Rock the control button up or down to toggle
the displayed folder’s icon on and off.
DELETING IMAGES
122
• Any folder with the icon is marked for deletion. All
its images will be deleted when you perform the next
step of this procedure.
• You can repeat steps 4 and 5 to mark and unmark
multiple folders if you want.
6.
Click the control button.
7.
In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
• If you change your mind and want to cancel the delete,
select “No” instead.
8.
Click the control button.
Deleting All Unprotected Images
Use the following procedure when you want to delete all of
the images currently on the camera’s memory card.
1.
Align the power/function switch with .
2.
Press MENU.
3.
Select “Delete” “All” and then rock the con-
trol button to the right.
4.
In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
• If you change your mind and want to cancel the delete,
select “No” instead.
5.
Click the control button.
MANAGING IMAGES
123
MANAGING IMAGES
The image management capabilities of the camera make it
easy to keep track of images. You can protect images
against deletion, and even use its DPOF feature to specify
images for printing.
Folders and Files
When you shoot the first image on a particular day, the cam-
era automatically creates a folder for that date. All subse-
quent images you shoot on that day are stored in the same
folder.
•For full details about the organization of folders on the
memory card, see “Using a Memory Card to Transfer Im-
age Data”on page 149.
Folders
A folder is created automatically whenever you shoot the
first image on a particular date. The name assigned to the
folder is based on the current date, as described below. You
can have up to 900 folders on a memory card at the same
time (subject to storage capacity restrictions).
Example: Folder created on July 19, which is the 100th
folder on the memory card
•The actual number of files you will be able to store on a
memory card depends on the capacity of the card, image
quality settings, etc.
100_0719
Serial number
Underbar
Month
Day
MANAGING IMAGES
124
11070026.JPG
Month
Day
Serial number
Extension (.JPG/.TIF/.AVI)
Files
Each folder can contain up to 250 image files. If you try to
save the 251st image to a folder, the camera automatically
creates a new folder and stores the image there. The names
assigned to files are based on the current date, as shown
below.
Example: 26th image shot on November 7
•In addition to image files, memory card also contains a
number of other files used by the system for image data
management.
•The actual number of files you will be able to store on a
memory card depends on the capacity of the card, image
quality settings, etc.
•Panorama images are stored as groups of multiple indi-
vidual images.
•If there are more than 250 image files in a folder (due to
copying from another digital camera or other source), only
the first 250 (in name sequence) can be played back.
MANAGING IMAGES
125
Protecting Images Against Deletion
Image protection guards against accidental deletion of im-
ages stored on the camera’s memory card. A protected im-
age cannot be deleted until it is unprotected (page 119). You
can protect and unprotect a single specific image, all the im-
ages in a particular folder, or all images currently on the
memory card.
Protecting Selected Images
1.
Align the power/function switch with .
2.
Press MENU.
3.
Select “Protect”“Select”and then rock the
control button to the right.
4.
Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to protect.
5.
Rock the control button up or down to toggle
the displayed image’s icon on and off.
•Any image marked with the icon is marked for pro-
tection. It will be protected when you perform the next
step of this procedure. Any image without the icon
will be unprotected.
•You can repeat steps 4 and 5 to turn on the icon
for multiple images if you want.
6.
Click the control button to protect all the im-
ages marked for protection, and unprotect the
unmarked images.
MANAGING IMAGES
126
Protecting and Unprotecting All Images
in Selected Folders
1.
Align the power/function switch with .
2.
Press MENU.
3.
Select “Protect”“Folder”and then rock the
control button to the right.
4.
Rock the control button to the left or right, or
rotate the selector dial to display the folder
whose images you want to protect.
5.
Rock the control button up or down to toggle
the displayed folder’s icon on and off.
•Any folder with the icon is marked for protection.
All its images will be protected when you perform the
next step of this procedure. All images in any folder
without the icon will be unprotected.
•You can repeat steps 4 and 5 to turn on the icon
for multiple folders if you want.
6.
Click the control button to protect the images
in all the folders marked for protection, and
unprotect the images in the unmarked folders.
MANAGING IMAGES
127
Protecting and Unprotecting All Images
1.
Align the power/function switch with .
2.
Press MENU.
3.
Select “Protect”“All”and then rock the con-
trol button to the right.
4.
Select the memory protection setting you
want, and then click the control button to apply
it.
To do this:
Protect all images on the memory card
Unprotect all images on the memory card
Select this:
On
Off
DPOF
The letters “DPOF”stand for “Digital Print Order
Format”, which is a format for recording on a
memory card or other medium which digital cam-
era images should be printed and how many
copies of the image should be printed. Then you
can print on a DPOF-compatible printer or at a
professional print service from the memory card
in accordance with the file name and number of
copies settings recorded on the card.
With this camera, you should always select im-
ages by viewing them on the monitor screen.
Do not specify images by file name without
viewing the file contents.
■DPOF Settings
File name, number of copies, date
MANAGING IMAGES
128
Making DPOF Settings for Particular Im-
ages
1.
Align the power/function switch with .
2.
Press MENU.
3.
Select “DPOF”“Select”and then rock the
control button to the right.
4.
Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to print.
5.
Use the button operations described below to
make the DPOF settings you want.
If you want to do this:
Decrease the number of
copies value
Increase the number of cop-
ies value
Toggle printing of the record-
ing date on and off
Do this:
Rock the control button
down.
Rock the control button up.
Press DISP.
•Note that some printers may not support recording
date printing.
•An image selected for printing is marked by the
icon.
•An image for which printing of the recording date is
turned on is marked with the icon.
•You can repeat steps 4 and 5 to make DPOF settings
for multiple image files, if you want.
6.
After you are finished making the settings you
want, click the control button to complete the
procedure.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara digital de Casio
Casio
Casio Exilim EX-Z30 Manual de usuario
Casio
Casio EExilim X-FH25 Manual de usuario
Casio
Casio Exilim EX-Z1050 Guía de solución de problemas
Casio
Casio EX-F1 - EXILIM Pro Digital Camera Manual de usuario
Casio
Casio Exilim EX-S100 Manual de usuario
Casio
Casio EX-M20U - 2 Manual de usuario
Casio
Casio Exilim EX-Z600 Manual de usuario
Casio
Casio QV-R62 Manual de servicio
Casio
Casio EXILIM EX-Z88 Manual de usuario
Casio
Casio QV-R40 Manual de programación
Casio
Casio Exilim EX-Z5 Manual de usuario
Casio
Casio Exilim EX-Z400 Manual de usuario
Casio
Casio EXILIM EX-ZR300 Manual de usuario
Casio
Casio EX-S2/EX-M2 Manual de usuario
Casio
Casio Exilim EX-ZR850 Manual de usuario
Casio
Casio EXILIM EX-ZS5 Manual de usuario
Casio
Casio EX-M20 - 1 Manual de usuario
Casio
Casio EX-MR1 Manual de usuario
Casio
Casio EXILIM EX-Z670 Manual de usuario
Casio
Casio QV-10C Instrucciones de instalación y mantenimiento
