Casio EX-S3 - 3 Manual de usuario
DELETING FILES
83
DELETING FILES
You can delete a single file, or you can delete all files
currently in memory.
IMPORTANT!
•Note that file deletion cannot be undone. Once you
delete a file, it is gone. Make sure you really do not
need a file anymore before you delete it. Especially
when deleting all files, make sure you check all the
files you have stored before proceeding.
•A protected file cannot be deleted. To delete a
protected file, unprotect it first (page 86).
•Delete cannot be performed when all the files in
memory are protected (page 87).
Deleting a Single File
Perform the following steps when you want to delete a
single file.
1.
In the PLAY mode,
press [왔] ( ).
2.
Use [왗] and [왘] to scroll through files and
display the one you want to delete.
3.
Use [왖] and [왔] to select “Delete”.
•To exit the file delete operation without deleting
anything, select “Cancel”.
4.
Press [SET] to delete the file.
•Repeat steps 2 through 4 to delete other files, if you
want.
5.
Press [MENU] to exit the menu screen.
DELETING FILES
84
Deleting All Files
The following procedure deletes all unprotected files
currently in memory.
1.
In the PLAY mode, press [왔] ( ).
2.
Use [왖] and [왔] to select “All Files Delete”,
and then press [SET].
3.
Use [왖] and [왔] to select “Yes”.
•To exit the file delete operation without deleting
anything, select “No”.
4.
Press [SET] to delete all the files.
IMPORTANT!
•If a file cannot be deleted for some reason, the
message “The function is not supported for this file.”
appears when you try to delete it.
FILE MANAGEMENT
85
FILE MANAGEMENT
The file management capabilities of the camera make it
easy to keep track of images. You can protect files against
deletion, and even use its DPOF feature to specify images
for printing.
Folders
Your camera automatically creates a directory of image
storage folders in its built-in Flash memory or on the
memory card.
Memory Folders and Files
An image you record is automatically stored in a folder,
whose name is a serial number. You can have up to 900
folders in memory at the same time. Folder names are
generated as shown below.
Example: Name of the 100th folder.
Each folder can hold files numbered up to 9,999.
Trying to store the 10,000th file in a folder causes the next
serially numbered folder to be created. Folder names are
generated as shown below.
Example: Name of the 26th file
Extension
CIMG0026.JPG
Serial number (4 digits)
•The actual number of files you will be able to store on a
memory card depends on the image quality settings,
capacity of the card, etc.
•For details about the directory structure, see “Memory
Directory Structure”on page 124.
100CASIO
Serial number (3 digits)
FILE MANAGEMENT
86
4.
Use [왖] and [왔] to
select “On”, and then
press [SET].
•A file that is protected is
indicated by the
mark.
•To unprotect a file, select
“Off”in step 4, and then
press [SET].
5.
Press [MENU] to exit the menu screen.
Protecting Files
Once you protect a file it cannot be deleted (page 83). You
can protect files individually or you can protect all files in
memory with a single operation.
To protect a single file
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY”tab,
select “Protect”, and
then press [왘].
3.
Use [왗] and [왘] to scroll through files and
display the one you want to protect.
FILE MANAGEMENT
87
To protect all files in memory
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY”tab, select “Protect”, and
then press [왘].
3.
Use [왖] and [왔] to select “All Files : On”, and
then press [SET].
•To unprotect all files, press [SET] in step 3 so the
setting shows “All Files : Off”.
4.
Press [MENU] to exit the menu screen.
DPOF
The letters “DPOF”stand for “Digital Print
Order Format”, which is a format for
recording on a memory card or other medium
which digital camera images should be
printed and how many copies of the image
should be printed. Then you can print on a
DPOF-compatible printer or at a professional
print service in accordance with the file name
and number of copies settings recorded on
the card.
With this camera, you should always select images by
viewing them on the monitor screen. Do not specify images
by file name without viewing the file contents.
■DPOF Settings
File Name,
number of copies,
date
FILE MANAGEMENT
88
5.
Use [왖] and [왔] to specify the number of
copies.
•You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
6.
To turn on date stamping for the prints, press
[DISP] so
12
12
1
is displayed.
•To turn off date stamping for the prints, press [DISP]
so
12
12
1
is not displayed.
•Repeat steps 4 through 6 if you want to configure
other images for printing.
7.
After all the settings are the way you want,
press [SET] to apply them.
To configure print settings for a single
image
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY”tab,
select “DPOF”, and
then press [왘].
3.
Use [왖] and [왔] to select “Select images”,
and then press [왘].
4.
Use [왗] and [왘] to
display the image you
want.
FILE MANAGEMENT
89
To configure print settings for all images
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY”tab, select “DPOF”, and
then press [왘].
3.
Use [왖] and [왔] to select “All images”, and
then press [왘].
4.
Use [왖] and [왔] to
specify the number of
copies.
•You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
5.
To turn on date stamping for the prints, press
[DISP] so
12
12
1
is displayed.
•To turn off date stamping for the prints, press [DISP]
so
12
12
1
is not displayed.
6.
After all the settings are the way you want,
press [SET] to apply them.
FILE MANAGEMENT
90
Exif Print
Exif Print is an
internationally supported,
open standard file format
that makes it possible to
capture and display vibrant
digital images with accurate
colors. With Exif 2.2, files
include a wide range of
shooting condition
information that can be
interpreted by an Exif Print
printer to produce better-
looking prints.
IMPORTANT!
•Information about the availability of Exif Print
compatible printer models can be obtained from each
printer manufacturer.
PRINT Image Matching II
Images include PRINT Image Matching
II data (mode setting and other camera
setup information). A printer that
supports PRINT Image Matching II
reads this data and adjusts the printed
image accordingly, so your images
come out just the way you intended
when you recorded them.
*Seiko Epson Corporation holds the
copyright for PRINT Image Matching and
PRINT Image Matching II.
FILE MANAGEMENT
91
1.
Use the DPOF procedure on page 87 to
specify the images in file memory that you
want to print.
2.
Connect the USB cradle to the printer.
USB
PHOTOCHARGEUSB
REC
PLAY
MENU
DISPSET
•Also, connect the AC adaptor to the USB cradle and
plug the AC adaptor into an electrical outlet.
3.
Set the camera on the USB cradle.
4.
Turn on the printer.
5.
Press the USB cradle
[USB] button.
•This displays the print
menu on the camera’s
monitor screen.
Using USB DIRECT-PRINT
Your camera supports USB
DIRECT-PRINT, which was
developed by Seiko Epson
Corporation. When connected
directly to a printer that supports
USB DIRECT-PRINT, you can
select images to be printed and
start the print operation directly
from the camera.
DPOF settings (page 87) are used
to determine which images and how
many copies should be printed.
FILE MANAGEMENT
92
6.
Load paper for printing the images into the
printer.
7.
Configure print quality, paper, and other
settings for your printer.
•See the user documentation that comes with your
printer for details about configuring its settings.
8.
On the camera’s monitor screen, use [왖] and
[왔] to select “Print”, and then press [SET].
•This automatically starts printing of the images you
specified with the DPOF procedure.
•If you want to print the same batch of images again,
press the [USB] button on the USB cradle.
•A message appears on the monitor screen, followed
by the DPOF setting screen (page 87), if there are no
DPOF settings currently configured on the camera to
control the printing operation. If this happens,
configure the required DPOF settings and then
perform step 6 of the above procedure again.
•If you want to change the current DPOF settings,
select “DPOF”on the print menu to display the
DPOF setting screen (page 87).
9.
After printing is complete, turn off the camera
and remove it from the USB cradle.
IMPORTANT!
•Contact your printer manufacturer for information
about models that support USB DIRECT-PRINT,
upgrades, etc.
•Never disconnect the USB cable, or perform any
camera or USB cradle operation while printing is in
progress. Doing so causes a printer error.
•To interrupt an ongoing print operation, perform the
required operation on the printer.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara digital de Casio
Casio
Casio EX-Z700 - EXILIM Digital Camera Manual de usuario
Casio
Casio EX-FR200 Manual de usuario
Casio
Casio EX-Z270 - EXILIM Digital Camera Manual de usuario
Casio
Casio QV-770 Manual de usuario
Casio
Casio Exilim EX-Z4U Manual de instrucciones y seguridad
Casio
Casio QV-2400UX Manual de usuario
Casio
Casio QV-4000 Manual de usuario
Casio
Casio EX S12 - EXILIM CARD Digital Camera Manual de usuario
Casio
Casio QV-70 Manual de usuario
Casio
Casio EX-Z700 - EXILIM Digital Camera Manual de usuario
Casio
Casio QV-R3 Manual de usuario
Casio
Casio QV-70 Manual de usuario
Casio
Casio EX-Z35 - EXILIM Digital Camera Manual de usuario
Casio
Casio EX-Z700 - EXILIM Digital Camera Guía de instalación
Casio
Casio EXILIM EX-H35 Manual de usuario
Casio
Casio QV-30 Manual de usuario
Casio
Casio QV-4000 Manual de usuario
Casio
Casio EX-S1 - EXILIM Digital Camera Guía de solución de problemas
Casio
Casio EXILIM EX-FH20 Manual de usuario
Casio
Casio EXILIM K1123PCM2DMX Manual de usuario
