Carrier KSACN1001AAA Manual de usuario

Specifications subject to change without notice. OM-KSACN1001AAA-01

Owner’s Manual

Fig. 1 — Wired Controller

NOTE: Images are for illustration purposes only. Actual models may differ slightly.

Wired Remote Controller

7 Day Programmable Thermostat

Ductless Systems

KSACN1001AAA

2 Specifications subject to change without notice. OM-KSACN1001AAA-01

TABLE OF CONTENTS

PAGE

SAFETY CONSIDERATIONS...........................................................................................3

WIRED CONTROLLER FEATURES AND FUNCTIONS...............................................5

WIRED CONTROLLER DISPLAY ...................................................................................6

WIRED CONTROLLER FUNCTIONS .............................................................................7

INITIAL SETUP..................................................................................................................8

WEEK AND DAY SETTINGS FOR WEEK 1 ................................................................15

WEEKLY TIMER OPERATION .....................................................................................17

WEEK AND DAY SETTINGS FOR WEEK 2 ................................................................23

WIRED CONTROLLER ERROR CODES ......................................................................32

QUERIES AND SETTINGS .............................................................................................33

STATIC PRESSURE QUERY FUNCTION.....................................................................34

TECHNICAL INDICATION AND REQUIREMENT .....................................................39

NOTE: In order to properly service the wired controller, read this manual carefully prior to operating the

unit. Keep this manual after reading for future reference.

0M-KSACN1001AAA-01 Specifications subject to change without notice. 3

SAFETY CONSIDERATIONS

Installing, starting up, and servicing air-conditioning equipment can be hazardous due to system

pressures, electrical components, and equipment location (roofs, elevated structures, etc.). Only

trained, qualified installers and service mechanics should install, start-up, and service this equipment.

Untrained personnel can perform basic maintenance functions such as cleaning coils.

When working on the equipment, observe precautions in the literature and on tags, stickers, and labels

attached to the equipment.

Follow all safety codes. Wear safety glasses and work gloves. Keep a quenching cloth and fire

extinguisher nearby when brazing. Use care in handling, rigging, and setting bulky equipment.

Read these instructions thoroughly and follow all warnings or cautions included in the literature and

attached to the unit. Consult the local building codes and National Electrical Code (NEC) for special

requirements. Recognize safety information.

This is the safety-alert symbol . When you see this symbol on the unit and in instructions or

manuals, be alert to the potential for personal injury. Understand these signal words: DANGER,

WARNING, and CAUTION. These words are used with the safety-alert symbol.

DANGER identifies the most serious hazards which will result in severe personal injury or death.

WARNING signifies hazards which could result in personal injury or death. CAUTION is used to

identify unsafe practices which may result in minor personal injury or product and property damage.

NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or

operation.

4 Specifications subject to change without notice. OM-KSACN1001AAA-01

ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury or death. Before beginning any modification or

installation of this kit, ensure the main electrical disconnect is in the OFF position. Ensure power is

disconnected to the fan coil unit. On some systems both the fan coil and the outdoor unit may be on the

same disconnect. Tag the disconnect switch with a suitable warning label. There may be more than one to

disconnect.

CAUTION

EQUIPMENT DAMAGE HAZARD

Failure to follow this caution may result in equipment damage or improper operation. Do not install the wired

controller in an area subjected to excessive steam, oil or sulfide gas. Doing so may damage the controller

and/or cause it to fail.

CAUTION

0M-KSACN1001AAA-01 Specifications subject to change without notice. 5

WIRED CONTROLLER FEATURES AND FUNCTIONS

Fig. 2 — Wired Controller

Features:

•LCDdisplay

• Malfunction code display for error code

display

• 4-way wire layout design, smooth rear

surface makes it easier to position the wires

and install the controller

• Room temperature display

• Weekly timer

Functions:

• Mode: select AUTO-LOW-DRY-HEAT-FAN

• Fan Speed: AUTO/LOW/MEDIUM/HIGH

• Timer ON/OFF

• Temperature Setting

• Weekly Timer

• FOLLOW ME

• Turbo

• 24-Hour System

• 12-Hour System

• Freeze Protection

•Sleep

• Auto-restart

• Automatic airflow test

• Child Lock

• LCD display

•Clock

6 Specifications subject to change without notice. OM-KSACN1001AAA-01

WIRED CONTROLLER DISPLAY

Fig. 3 — Wired Controller Display

1. Operation mode indication

2. Fan speed indication

3. Temperature display

4. Lock indication

5. °F / °C indication

6. Room temperature indication

7. Follow Me function indication

8. Sleep mode indication

9. Electric Auxiliary Heat/Turbo Function

NOTE: AHU models only have Turbo function.

10. Left-Right Swing (not available)

11. Clock display

12. ON/OFF Timer

13. Timer Display

12345

13 12

0M-KSACN1001AAA-01 Specifications subject to change without notice. 7

WIRED CONTROLLER FUNCTIONS

Fig. 4 — Wired Controller Functions

1. Power

2. Mode

3. Day Off/Del

4. Adjust

5. Confirm

6. Timer

7. Fan Speed

8. Back

9. Swing (not available)

10. Function

11. Copy

12. IR (Infrared) Signal Receiver

611

8 Specifications subject to change without notice. OM-KSACN1001AAA-01

INITIAL SETUP

Set the current day and time

NOTE: The Wired Controller can be powered ON or

OFF during this step.

1. Press TIMER for 2 seconds or more to set

the current date and time. The TIMER display

flashes (see Fig 5).

Fig. 5 —Timer

2. Press the UP or DOWN arrow (Fig. 8) to

set the week day; the selected week day

will flash (Fig. 7).

Fig. 6 —Up or Down Arrows

Fig. 7 — Days of the Week

3. Press TIMER to confirm. If there is no

button pressed within 10 seconds, the

displayed week day will be saved.

4. Press the UP or DOWN arrows (Fig. 6) to

set the current time. Press repeatedly to

adjust the current time in 1-minute

increments. Press and hold to adjust the

current time continuously. Press TIMER to

confirm. If there is no button pressed within

10 seconds the displayed time is saved.

Fig. 8 — Week Day and Time

5. Time scale selection: Press TIMER (See

Fig. 5 — on page 8) and DAY OFF (Fig. 9)

for 2 seconds to alternate the clock time

display between the 12 hour and 24 hour

formats.

Fig. 9 — Timer

ex. Monday 11:20

0M-KSACN1001AAA-01 Specifications subject to change without notice. 9

Start and Stop Operation

•PressPOWER to power on the controller.

Fig. 10 — Power

Freeze Protection

Fig. 11 — Freeze Protection

With the unit is in HEAT mode press the down

arrow until the setpoint is 60°F (16°C). Press the

down arrow two times within one seconds to

activate the FREEZE PROTECTION function

(heating set back). The unit will now operate at a

set temperature of 46°F (8°C). The indoor unit

display shows FP. No icon appears on the remote

control.

NOTE: This function is only available in the

HEATING mode.

Under this function, the unit heats at high fan

speed until the space temperature is 46°F (8°C).

This mode can also be deactivated by pressing

POWER, MODE, FAN SPEED, TIMER, or either

ADJUST arrow.

To Set the Operation Mode

•PressMODE (see Fig. 12) to set the

OPERATION MODE (see Fig. 13) (HEAT

function is invalid for a COOL only type unit).

Fig. 12 — Mode

Fig. 13 — Operation Modes

When the mode is selected as emergency

heating (single-on electric auxiliary heating)

mode, the AUX icon appears in the MODE area,

the fan speed displays AUTOMATIC WIND, the

fan speed key no longer responds.

There are no SLEEP, FREEZE PROTECTION,

TURBO functions in the emergency HEATING

mode.

When the mode is selected as HEATING +

ELECTRIC AUXILIARY HEATING mode, the

icons appear in the mode area and the TURBO

function does not respond.

10 Specifications subject to change without notice. OM-KSACN1001AAA-01

Room Temperature Setting

1. Press the

DOWN

arrow (Lower or Raise

(see Fig.14)) to set the room temperature.

NOTE: This function in unavailable in FAN mode.

Fig. 14 — Up or Down Arrows (Lower and

Raise)

Indoor Setting Temperature Range:

62°F~86°F (17°C~30°C)

2. °F and °C Scale Selection - Press and

hold the UP or DOWN arrow for 3 seconds

to alternate the temperature display

between the °F and °C scale.

Fan Speed

•PressFAN SPEED to set the fan speed.

NOTE: This function is unavailable when the unit is

in AUTO or DRY mode.

Fig. 15 — Fan Speed

Keypad Tone

Enable Keypad Tone

•PressSWING and FUNC. together (Fig. 16)

for 3 seconds to enable the keypad tone.

Disable Keypad Tone

•PressSWING and FUNC. together (Fig. 16)

for 3 seconds to disable the keypad tone.

Fig. 16 — Keypad Tone Set

Lower

Raise

HIGHAUTO LOW MED

Tabla de contenidos

Otros manuales de Termostato de Carrier

Carrier

Carrier ComfortVu TB-24 Instrucciones de funcionamiento

Carrier

Carrier Aquazone 50QE900-NPWS Manual de usuario

Carrier

Carrier TST-EEPC06111SCS00 Manual de usuario

Carrier

Carrier Cool Share Web-Programmable Thermostat Manual de usuario

Carrier

Carrier Debonair 33CSSN2-WC Manual de usuario

Carrier

Carrier DEBONAIR 33CS Instrucciones y recetas

Carrier

Carrier Comfort Non-Programmable Manual de usuario

Carrier

Carrier 33AW-CS1 Manual de usuario

Carrier

Carrier TSTATCCPB101 Manual de usuario

Carrier

Carrier 53DFS250-SL Manual de usuario

Carrier

Carrier Programmable Dual Fuel Thermostats Instrucciones y recetas

Carrier

Carrier 33CS Manual de usuario

Carrier

Carrier TSTATCCPB501 Guía

Carrier

Carrier Infinity SYSTXCCITW01 Manual de usuario

Carrier

Carrier XCT 7 40VCC727FQEE Manual de usuario

Carrier

Carrier EDGE Pro Manual de usuario

Carrier

Carrier AQUAZONE 50QE900 Manual de usuario

Carrier

Carrier Connect 33CONNECTSTAT43FX Manual de usuario

Carrier

Carrier A07051 Manual de usuario

Carrier

Carrier 33CS400-01 Manual de usuario

Carrier

Carrier 33CS400-01 Manual de usuario

Carrier

Carrier A07049 Manual de usuario

Carrier

Carrier KSACN0901AAA Manual de usuario

Carrier

Carrier 53DFS250-HW Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Honeywell

Honeywell T6811 Manual de usuario