Canon Inner Finisher Additional Tray-A1 Manual de referencia

(1/2)

Canon Service Bulletin COPIER

Issued by Canon Europa N.V.

Location:

OPTION TRAY ASSEMBLY

Subject:

Preventing additional finisher tray from being detached

Detaile:

The additional finisher tray is detached/The error code E540 is indicated

<Cause>

The additional finisher tray lifts the slide guide when coming up. At this time the slide guide inclines, and is

warped toward the direction A (see the photo below) together with the upper height panel. Due to this, the

additional finisher tray comes free from the L-shape rim of the slide guide and gets on the rim.

As a result, the additional finisher tray bumps into the slide guide when coming down, leading to detachment

of the additional finisher tray or the error code E540-0001 (upper tray ascent/descent motor clock error).

F-1

Model:

Additional Finisher Tray-A1

Ref No.:

Acc-397

(F3-T01-00W-10027-01)

Date:

25-06-04

[1] Additional Finisher Tray

[2] Slide Guide

[3] Upper Height Panel

Acc-397

(2/2)

The slide guide stopper to prevent the upper height panel from being warped is included with the additional

finisher tray A1 product.

(Attach the slide guide stopper when installing the additional finisher tray A1.)

Service Work:

Attach the slide guide stopper to the finisher frame when either of the foregoing symptoms occurs. For attaching

procedure, see the attached file "Slide Guid Stopper Installation Procedure".

F-2

Service Parts:

Affected Machines:

JLE01606 and later

[1] Slide Guide Stopper

[2] Finisher Frame

Description Part Number Q'ty I.C. P.C.

Old

New Stopper, Guide,

Slide FC5-6994-000 0->1 Q17

Slide Guid Stopper Installation Procedure

1) In the case of the Finisher-Q1/R1, open the front

door [1], remove the 3 screws [2], and detach the

front cover [3].

2) In the case of the Saddle Finisher-Q2/R2, open

the front cover [1].

3) In the case of the Finisher-Q1/R1, remove the 3

screws [1], and detach the rear cover [2].

4) In the case of the Saddle Finisher-Q2/R2, detach

the cable cover [1], remove the 6 screws [2], and

detach the rear cover [3].

5) Remove the 2 screws [1], and open the upper

cover of the finisher; then, detach the upper left

cover [3] as if to pull out the claw [2].

6) Remove the screw [1], and detach the slide guide

stopper [2]; then, slide the slide guide [3] upward to

detach. The removed slide guide stopper will not be

used later.

7) Before mounting the slide guide, which is

contained in the carton box, on the finisher, place

the lubricant (permanent lubricant G2) [1] at five

points on the slide guide and spread it over the slide

guide. (The locations for lubricant application are

indicated in [2] in the slide guide.)

8) Wipe off the extra lubricant with lint-free paper,

so that only a slight amount of lubricant is left on

the surface.

! If you fail to completely wipe off the extra

lubricant, it may adhere to copy paper.

9) Slide-in the slide guide from top to the finisher.

10) Peel off the liner from the double-faced tape [2]

adhered to the supplied slide guide stopper [1] at

two positions.

11) Using the screw (RS tight, M3 x 8) [3] removed

in step 6, install the slide guide stopper.

12) Mount the upper left cover, rear cover, and front

cover (in the case of the Finisher-Q1/R1) of the

finisher.

Otros manuales para Inner Finisher Additional Tray-A1

Otros manuales de Accesorios de impresora de Canon

Canon

Canon Super G3 FAX Board-AH1 Manual de usuario

Canon

Canon NP6218 Cómo utilizar

Canon

Canon PFI-101 Manual de usuario

Canon

Canon Finisher-R1 Manual de servicio

Canon

Canon Color Network Multi-PDL Printer Kit-C1 Manual de usuario

Canon

Canon NP6330 Cómo utilizar

Canon

Canon Super G3 FAX Board-AS Manual de usuario

Canon

Canon DADF-R1 Manual de usuario

Canon

Canon E3730A Manual de usuario

Canon

Canon Additional Finisher Tray-C1 Manual de operación y mantenimiento

Canon

Canon Super G3 2nd Line FAX Board-AM1 Manual de usuario

Canon

Canon SELPHY BU-20 Guía de configuración

Canon

Canon Inner Finisher Additional Tray-A1 Manual de operación y mantenimiento

Canon

Canon DADF-N1 Manual de usuario

Canon

Canon DADF-P1 Manual de usuario

Canon

Canon iP4000 - PIXMA Photo Printer Manual de usuario

Canon

Canon Two-Knife Booklet Trimmer-A1 Manual de usuario

Canon

Canon Additional Finisher Tray-C1 Manual de usuario

Canon

Canon Cassette Feeding Module-J1 Manual de operación y mantenimiento

Canon

Canon BW Voice Guidance Board-A1 Manual de usuario

Canon

Canon BC-05 Manual de usuario

Canon

Canon imagePROGRAF SS-41 Manual de usuario

Canon

Canon Duplex Unit-A1 Manual de usuario

Canon

Canon Paper Deck-V1 Manual de usuario

Manuales populares de Accesorios de impresora de otras marcas

Star Micronics

Star Micronics TSP800 Series Manual de usuario

REA

REA JET HR pro 2K Manual de usuario

HP Laserjet,Color Laserjet 4si Manual de usuario

oliser

oliser MS 45 Manual de usuario

Roland

Roland DU2-64 Instrucciones y recetas

Xerox

Xerox EFI EXP6000 Manual de usuario

Sharp

Sharp FO-1MK Manual de usuario

Labelmate

Labelmate PM-300 Manual de usuario

Epson

Epson T6248 Manual de funcionamiento

Epson

Epson OT-BZ20 Manual de usuario

Ricoh

Ricoh LCIT RT5100 Guía de inicio rápido

GBC

GBC 16 Series Manual de usuario

Develop

Develop SD-509 Manual de usuario

Kyocera

Kyocera KM-6230 Manual

Triumph Adler

Triumph Adler DF-710 Manual

Citizen

Citizen CBM-202PC Series Manual de usuario

Codonics

Codonics Virtua 1VCX-LR833 Guía de referencia

TonerRefillKits

TonerRefillKits ReChargX RX126 Manual de usuario