Canon PowerShot N2 Manual de usuario
Sending still images and movies between two Canon-brand
cameras (Wi-Fi function) (PowerShot N2)
You can connect two cameras via Wi-Fi and send images between.
NOTE
•Only Canon-brand cameras equipped with a Wi-Fi function can be connected to
wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be
connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this method.
•Connections require that a memory card be in the camera.
•Keep your fingers or other objects off the Wi-Fi antenna area. Covering this may
decrease the speed of your image transfers.
•Depending on the condition of the network you are using, it may take a long time
to send movies. Be sure to keep an eye on the camera battery level.
•Up to 50 images can be sent together at once. One movie up to five minutes (or
one digest movie up to 13 minutes) can be sent.
•On the screen, wireless signal strength is indicated by the following icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
Connecting the cameras via Wi-Fi
Perform the following operations on both of the cameras to be connected.
1. Press the <Playback> ( ) button to turn the camera on.
2. Touch [Wi-Fi].
NOTE
When making Wi-Fi settings for the first time, a screen will appear for you to register a
nickname for the camera.
Touch inside the frame to access the keyboard, and then enter a nickname. This nickname will be
displayed on the screen of target devices when connecting to other devices via Wi-Fi.
3. Touch [ ].
4. Drag your finger up or down on the screen to choose [Add a Device].
NOTE
•Once a camera is added, the camera nickname will be displayed on the screen in step 4.
To connect to a camera again, simply choose the camera nickname from the list.
5. The following screen appears.
Perform steps 1 4 on the other camera as well.
Camera connection information will be added when [Start connection on target camera] is
displayed on both camera screens.
Once the other camera is registered, the screen for sending images will appear. Please see step 7
and later steps for instructions on how to send images.
6. Once both cameras are connected, a screen similar to the following one will be displayed.
NOTE
•Once you have connected to devices via the Wi-Fi menu, recent destinations will be
listed first when you access the Wi-Fi menu. You can easily connect again by choosing
the device. You can register new devices by dragging left or right to access the device
selection screen.
•If you prefer not to display recent target devices, touch [FUNC.], and then choose
[MENU] > [ ] tab > [Wi-Fi Settings] > [Target History] > [Off].
•To add multiple cameras, repeat the above procedures starting from step 2.
Sending Images to a Camera Individually
7. Touch [Send this image].
NOTE
•You can choose the resolution (size) of images to send by touching [ ] on the image
transmission screen.
•Movies cannot be resized.
8. The following screen appears.
After the image has been sent to the target camera and the [Transfer completed] message
appears, return to step 7.
Sending Multiple Images
9. Touch [Select and send].
10. The following screen appears.
•Touching an image to send will label it with a [ ] icon.
•To cancel selection, touch the image again. [ ] is no longer displayed.
•If you move the zoom ring toward [ ], the camera will switch to single-image display.
You can also drag left or right across the screen to choose images.
•After you finish choosing images, touch [OK].
11. The following screen appears.
NOTE
•You can choose the resolution (size) of images to send.
•Movies cannot be resized.
Touch [Send].
•[Transfer completed] is displayed after the image is sent, and the image transfer screen is
displayed again.
•To disconnect, touch [ ] in the upper right, and then touch [OK] on the confirmation
screen.
Otros manuales para PowerShot N2
2
Tabla de contenidos
Otros manuales de Cámara digital de Canon
Canon
Canon EOS EOS 300D Manual de usuario
Canon
Canon PowerShot S120 Manual de usuario
Canon
Canon PowerShot SD580 IS Manual de usuario
Canon
Canon PowerShot A60 Instrucciones de montaje
Canon
Canon EOS 650 Manual de usuario
Canon
Canon WP-DC39 Manual de usuario
Canon
Canon PowerShot S2IS Manual de usuario
Canon
Canon PowerShot A2100 IS Manual de usuario
Canon
Canon Powershot SD970 IS Digital Elph Manual de usuario
Canon
Canon POWERSHOT SD870IS Manual de usuario
Canon
Canon A-1 Manual de usuario
Canon
Canon Powershot SD40 Manual de usuario
Canon
Canon Powershot SX40 HS Manual de usuario
Canon
Canon PowerShot SX210 IS Manual de usuario
Canon
Canon Powershot SD1400 IS Manual de usuario
Canon
Canon PowerShot S1IS Manual de usuario
Canon
Canon EOS RP Manual de usuario
Canon
Canon EOS-1 DX Mark III Instrucciones de montaje
Canon
Canon PowerShot S110 Digital ELPH Manual de usuario
Canon
Canon WP-DC51 Manual de usuario
