Canon IXUS 275 HS Manual de usuario
CEL-SV7CA211
ENGLISH
Getting Started
2
Package Contents
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-11LH*1
Battery Charger
CB-2LFE
Wrist Strap*2
*1 Do not peel off the adhesive covering from a battery pack.
*2 For attachment instructions, refer to the Camera User Guide that can be downloaded
from the Canon website.
• Printed matter is also included.
• A memory card is not included.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card as
needed. The following memory cards can be used, regardless of capacity.
For details on the number of shots and recording time per memory card,
see “Specifications” in the downloadable Camera User Guide.
• SD memory cards*
• SDHC memory cards*
• SDXC memory cards*
* Cards conforming to SD standards. However, not all memory cards have been verified
to work with the camera.
3
Manuals and Software
Manuals and Software
You can download manuals and software from the following URL.
http://www.canon.com/icpd/
• With a computer connected to the Internet, access the above URL.
• Access the site for your country or region.
• Adobe Reader is required to view the manuals.
• You can also download software from the URL above. For instructions on
downloading and installing the software, refer to the Camera User Guide
available for download.
• You may be requested to enter the Serial
number (Body no.) when downloading the
manuals and software.
In this case, enter the number printed on the
bottom of the camera.
Initial Preparations
Initial Preparations
1Attach the strap.
Thread the end of the strap through the
strap mount (1), and then pull the other
end of the strap through the loop on the
threaded end (2).
2Insert the battery pack.
After aligning the marks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
(1)
(2)
(1)
(2)
4
Initial Preparations
3Charge the battery pack.
Plug the power cord into the charger,
then plug the other end into a
power outlet.
The charging lamp turns orange, and
charging begins.
When charging is finished, the lamp
turns green, and you can remove the
battery pack.
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to “Specifications” in the
downloadable Camera User Guide.
4Open the cover.
Slide the cover (1) and open it (2).
5Insert the battery pack.
Holding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
When removing the battery pack, move
the battery lock in the direction of
the arrow.
(2)
(1)
(1) (2)
5
Initial Preparations
6Check the card’s write-protect
switch and insert the
memory card.
Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Move the
switch in the direction of the arrow (1).
Insert the memory card with the terminals
(2) facing as shown until it clicks
into place.
When removing the card, push the
memory card in until it clicks, and then
slowly release it.
7Close the cover.
Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.
8Set the date and time.
Press the [ ][ ] buttons to choose
an item.
Press the [ ][ ] buttons to specify the
date and time.
When finished, press the [ ] button.
(1)
(2)
(1)
(2)
6
Initial Preparations
9Specify your home time zone.
Press the [ ][ ] buttons to choose your
home time zone.
Press the [ ] button when finished.
After a confirmation message, the setting
screen is no longer displayed.
To turn off the camera, press the
ON/OFF button.
10
Set the display language.
Press the [ ] button.
Press and hold the [ ] button, and then
immediately press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [ ] button.
Changing the Date and Time
• To change the date and time once they have been set, press the [ ]
button, use the zoom lever, and then select the [ ] tab. Press the [ ][ ]
buttons to choose [Date/Time], press the [ ] button, set the date and time
as explained in step 8, and then press the [ ] button.
7
Trying the Camera Out
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1Turn on the power and enter
[] mode.
Press the ON/OFF button.
Set the mode switch to [ ].
Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press
the [ ] button again.
Press the [ ][ ] buttons to choose
[], and then press the [ ] button.
2Compose the shot.
To zoom in and enlarge the subject,
move the zoom lever toward [ ], and to
zoom away from the subject, move it
toward [ ].
3Shoot.
Shooting Still Images
Press the shutter button lightly (1).
The camera beeps twice after focusing,
and as frames are displayed to indicate
image areas in focus, you may shoot the
image by pressing the shutter button all
the way down (2).
8
Trying the Camera Out
Recording Movies
Press the movie button to start recording,
and press it again to stop.
Viewing
1Enter Playback mode.
Press the [ ] button.
2Choose images.
To view the previous or next image,
press the [ ][ ] buttons.
Movies are identified by a [ ] icon.
To play movies, go to step 3.
3Play movies.
Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press
the [ ] button again.
Playback now begins, and after the movie
is finished, [ ] is displayed.
To adjust the volume, press the [ ][ ]
buttons during playback.
Erasing Images
• To erase a selected image, press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the [ ] button again. After [Erase?]
is displayed, press the [ ][ ] buttons to choose [Erase], and then press
the [ ] button. Note that erased images cannot be recovered.
9
© CANON INC. 2015
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara digital de Canon
Canon
Canon PowerShot G2 Manual de instrucciones
Canon
Canon Power Shot A 720 IS Manual de usuario
Canon
Canon PowerShot SX600 HS Manual de usuario
Canon
Canon power shot S51S Manual de operación y mantenimiento
Canon
Canon PowerShot A720 IS Manual de usuario
Canon
Canon POWERSHOT 220 HS Manual de usuario
Canon
Canon EOS 5D Mark III Manual de usuario
Canon
Canon 3509B001 Manual de usuario
Canon
Canon IXUS-65 Manual de usuario
Canon
Canon PowerShot SX130 IS Manual de usuario
Canon
Canon ZR930 Manual de usuario
Canon
Canon EOS 70 Manual de usuario
Canon
Canon A-1 Instrucciones de montaje
Canon
Canon Powershot S60 Instrucciones de montaje
Canon
Canon Powershot S2 IS Manual de usuario
Canon
Canon PowerShot S31S Manual de usuario
Canon
Canon MACRO SPEEDLITE MR-14EX Manual de usuario
Canon
Canon EOS-1D Mark II Digial Manual de usuario
Canon
Canon POWERSHOT PRO 1 Manual de usuario
Canon
Canon EOS REBEL XS Manual de usuario
