Canon EOS Series Manual de instrucciones

Tabla de contenidos

Otros manuales de Cámara digital de Canon

Canon

Canon EOS DIGITAL REBEL XTi Manual de usuario

Canon

Canon PowerShot A720 IS Manual de usuario

Canon

Canon PowerShot A3300 IS Manual de usuario

Canon

Canon Powershot SX120 IS Manual de usuario

Canon

Canon EOS Rebel T4i Manual de usuario

Canon

Canon PowerShot SX530 HS Manual de instrucciones

Canon

Canon EOS 600D Manual de usuario

Canon

Canon POWERSHOT A630 Manual

Canon

Canon VC-C4 Manual de usuario

Canon

Canon EOS Rebel T3i Manual de usuario

Canon

Canon IXUS 110 IS Manual de usuario

Canon

Canon EOS 100D Guía de instalación

Canon

Canon AS 6 Manual de usuario

Canon

Canon PowerShot S30 Manual de instrucciones

Canon

Canon PowerShot G12 Manual de usuario

Canon

Canon PowerShot G5X Manual de usuario

Canon

Canon IXUS 80 IS Manual de usuario

Canon

Canon EOS 6D Manual de usuario

Canon

Canon POWERSHOT A700 Manual de usuario

Canon

Canon TL Manual de usuario

Canon

Canon PowerShot A2500 Manual de usuario

Canon

Canon EOS 20D Digital Manual de usuario

Canon

Canon DIGITAL IXUS 55 Guía del usuario

Canon

Canon PowerShot A470 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Nikon

Nikon Coolpix 100 Manual de usuario

1

© 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.

EOS

Step-by-Step Setup Guide

Wireless File TransmiTTer

linked shoT mode

2

EOS Wireless File Transmitter

Linked Shot Setup

Master Camera Initial Setup

Overview

In Linked Shot mode one EOS WFT-equipped

camera is set up as the master with the remaining

WFT-equipped cameras set up as slaves. You can

connect up to 10 slaves. The master can trigger the

slaves simultaneously or with intervals and/or de-

lays based on your preference and camera settings.

No other equipment or software is necessary.

1Turn on the camera with WFT unit attached.

Note that the WFT requires its own battery.

Press the MENU button on the camera, then

navigate to the Tool menu that lists WFT set-

tings. Select [WFT settings].

2Under WFT settings, elect [Connection wizard].

3Under Select communication method, select

[LinkedShot]. Select [OK].

3

4Under Linked Shooting settings, select [Mas-

ter]. Select [OK].

5You should see the [Busy...] screen at right.

Leave the master camera set to this screen

while you continue to set up the slaves as

described below.

Slave Camera Setup

1Turn on the camera with the WFT unit attached.

(The WFT requires its own battery.) Navigate to

the Tool menu that contains the WFT settings

menu. Select [WFT Settings].

2Under WFT settings, select [Connection wiz-

ard].

4

4Under Linked Shooting settings, select [Slave].

Select [OK].

3Under Select communication method, select

[LinkedShot]. Select [OK].

1The Linked Shooting settings screen on the

master camera should look like the screen at

right. The number you see will depend on how

many slaves you have correctly set up.

Select [OK] to connect to the slave(s).

5You should see the screen at right.

Select [OK] to connect to the master camera.

Repeat this ve-step procedure for each

additional slave you wish to link.

Master Camera Final Setup

5

2Each of the cameras will conrm their

connection. Masters will conrm that they are

connected to the slave(s).

Select [OK] to conrm and exit the menu.

Slaves will conrm that they are

connected to the master camera.

Select [OK] to conrm and exit the menu.

When you have nished using Linked Shot

mode, return to the WFT settings menu to select

[Disconnect.]

How to Disconnect

To reconnect:

1. Begin with the same cameras you originally

set-up.

2. Set the master camera from [Disconnect] to

[LinkedShot].

3. Set all slaved cameras from [Disconnect] to

[LinkedShot].

How to Reconnect

© 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.