Canon PIXMA MG5420 Manual de usuario

PIXMA MG5400

Setup Guide

series

Setup Guide

This guide provides information for setting up a network connection for the printer.

Network Connection

Wireless Connection

Preparation for Connection

Printer Setup

Setup Procedure Selection

Push Button Method

Standard setup

WPS

Other setup (Advanced setup)

Disable

WEP

WPA/WPA2

Character Entry

Troubleshooting

Network Connection

Wireless Connection

aPreparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the POWER lamp (A) will be lit.

Notes on Wireless Connection

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to.

The con guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n, 802.11g or 802.11b.

If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11 n only."

For of ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

bPrinter Setup

1. Press the HOME button (A) on the printer.

•

2. Use the or button (A) to display the WLAN setup icon.

3. Press the left Function button (B).

The (blue) Wi-Fi lamp (C) lights up when wireless connection is enabled.

cSetup Procedure Selection

The printer will automatically search for access points supporting WPS (Wi-Fi Protected Setup).

* If the Push Button Method screen is displayed on the printer

When you are unsure if your access point or router supports this technology, press the Stop button.

Proceed to the screen for Standard setup.

Push Button Method → d-A Select the most suitable connection method from the following.

Standard setup → d-B

Connect to Access Point by entering the Network Password

WPS → d-C

Connect to WPS-compatible Access Point

Other setup (Advanced setup) → d-D

Connecting to the Network by Entering the Access Point's Settings

Directly on the Printer

When using WEP key number 2, 3 or 4, select "Advanced setup".

•

d-A Push Button Method

dConnection Using WPS

1. Press and hold the WPS button on the access point.

For details on pressing the WPS button, refer to the access point manual.

2. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

3. When the left screen appears, press the OK button.

The network connection setup is now complete.

d-B Standard setup

dConnection via Standard setup

1. Select Standard setup.

2. Press the OK button.

3. Select your access point, then press the OK button.

4. One of the screens below will be displayed on the printer.

5. Press the OK button.

6. Enter the network password (WEP key or passphrase).

Character entry is case-sensitive.

7. Press the left Function button.

8. Make sure that the network password is correct.

Character entry is case-sensitive.

9. Press the left Function button.

10.When the left screen appears, press the OK button.

The network connection setup is now complete.

d-C WPS

dConnection Using WPS

1. Select WPS.

2. Press the OK button.

3. Select Push button method.

4. Press the OK button.

5. Press the OK button.

6. Press and hold the WPS button on the access point.

For details on pressing the WPS button, refer to the access point manual.

7. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

8. When the left screen appears, press the OK button.

The network connection setup is now complete.

d-D Other setup (Advanced setup)

dConnection via Advanced setup

1. Select Other setup.

2. Press the OK button.

3. Select Advanced setup.

4. Press the OK button.

5. Select your access point, then press the OK button.

6. Select the security protocol used by the access point, then press the OK button.

Disable

7. When the left screen appears, press the OK button.

The network connection setup is now complete.



WEP

7. Select the WEP key number you want to use.

8. Press the OK button.

9. Press the OK button.

10.Enter the WEP key.

Character entry is case-sensitive.

11. Press the left Function button.

12.Make sure that the WEP key is correct.

13.Press the left Function button.

14.When the left screen appears, press the OK button.

The network connection setup is now complete.



WPA/WPA2

7. Press the OK button.

8. Enter the passphrase.

Character entry is case-sensitive.

9. Press the left Function button.

10.Make sure that the passphrase is correct.

11. Press the left Function button.

12.When the left screen appears, press the OK button.

The network connection setup is now complete.



Otros manuales para PIXMA MG5420

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon iPF5100 - imagePROGRAF Color Inkjet Printer Manual de usuario

Canon

Canon PIXMA MG4200 Series Manual de usuario

Canon

Canon iR2020 Series Manual de usuario

Canon

Canon PIXMA MP470 Manual de usuario

Canon

Canon Pixma MG3500 Series Guía de configuración

Canon

Canon MX520 series Guía de configuración

Canon

Canon imageRUNNER ADVANCE C2230 Manual de usuario

Canon

Canon MP540 Manual de usuario

Canon

Canon imageRUNNER ADVANCE C2230 Instrucciones de instalación

Canon

Canon DR-202 Manual de uso y cuidado

Canon

Canon Color imageCLASS MF8170c Instrucciones de instalación y mantenimiento

Canon

Canon MultiPASS L60 Instrucciones de montaje

Canon

Canon imageRUNNERC1028iF Guía de seguridad

Canon

Canon iR1600 Series Manual de usuario

Canon

Canon PIXMA MP620 series Manual de usuario

Canon

Canon imageCLASS MF5770 Manual de usuario

Canon

Canon ImageCLASS MF4690 Manual de instalación y operación

Canon

Canon PIXMA MX860 series Manual de usuario

Canon

Canon imageCLASS MF269dw Manual de usuario

Canon

Canon MultiPASS C545 Manual de usuario

Canon

Canon MF267dw II Manual de usuario

Canon

Canon MF754Cdw Manual de usuario

Canon

Canon PIXMA MX432 Manual

Canon

Canon Pixma MG2400 Series Guía de configuración

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario