Canon MP730 - MultiPASS Color Inkjet Manual

Unpack the machine and its components.

Check that you have the following:

NOTE

•Aprinter cable is not included.You must purchase a USB cable (less than 16 #/8 ft./5 m) to

connect your machine to a computer.

Machine

Multi-purpose tray

Tray cover

Document tray

Printhead

Ink tanks

(Black, cyan, magenta, yellow)

Paper output tray

Power cord

Documentation

(Set-Up Sheet, Quick Reference Guide)

MultiPASS MP730/700 Setup CD-ROM

Telephone line cord

Destination labels

Set-Up Sheet

Thank you for purchasing the Canon MultiPASS MP730.

To get your machine ready for use, please follow the instructions in this Set-Up Sheet

before referring to any other documentation.

READ THIS SHEET FIRSTREAD THIS SHEET FIRST

•DO NOT assemble the machine or connect the USB cable

before installing the software.You will be instructed when

to assemble and connect the cable.

IMPORTANT

NOTE

•When installing the software in Windows 2000/XP, you must log on as Administrator or

have Administrator privileges.

•If you have previously installed an earlier version of the MultiPASS Suite software (version

4.4 or earlier), you must uninstall it before installing this version. For details on uninstalling

the software, refer to the documentation of the previous version.

Install the software.

1Turn on your computer.

2On your computer, quit any open applications, including virus checkers.

3Insert the MultiPASS MP730/700 Setup CD-ROM into your disk drive.

4In the [MP Setup] screen, click [Install MP Drivers].

• If Set-up screen is not displayed, on the Windows

desktop, double-click [My Computer] (Windows XP: Click

[Start], then click [My Computer]). Open the CD-ROM

icon, then double-click [setup (setup.exe)].

5Follow the on-screen instructions.

Make sure [Yes, I want to restart my computer

now.] is selected and then click [Finish] to

restart your computer. (Do not remove the

CD-ROM at this stage.)

6Click [Finish].

7In the [MP Setup] screen, click [Install MP Toolbox].

• If you had to restart your computer and Set-up screen is

not displayed or you have closed it, on the Windows

desktop, double-click [My Computer] (Windows XP: Click

[Start], then click [My Computer]). Open the CD-ROM

icon, then double-click [setup (setup.exe)].

If you do not need to restart your computer,

the following screen is displayed.

If you need to restart your computer,

the following screen is displayed.

8Follow the on-screen instructions.

9Click [Finish].

IMPORTANT

• Proceed to step below to assemble the machine.

Please keep your computer powered on.

Remove the shipping material from the machine.

1Place the machine on a flat surface.

2Remove all shipping tapes from the exterior of the machine.

3Open the document cover Aand remove the protective sheet B.

4Open the feeder cover Cand remove the shipping material Das shown below.

Assemble the machine.

3Attach the document tray, then lower it.

2Attach the paper output tray

listen for audible click.

1Attach the multi-purpose tray.

Connect the telephone line and any necessary external device,

and set the receive mode.

NOTE

• Before using your machine, you need to make

sure it is set for your telephone line type.

For details, see p. 6-4 of the User’s Guide.

• Refer to the receive mode instructions after the

unit is powered on.

Connect the power cord.

IMPORTANT

• Before turning on the power, make sure the document cover Ais closed.

03 04

07 08

ON/OFF(1sec.)

PUT IN CARTRIDGE

1Plug the power

cord into a socket.

2When you connect

the machine, the

Alarm light blinks,

and the messages

above should

appear in the LCD.

3If nothing appears in the LCD,

press [ON/OFF (1 sec.)] to turn on

the machine.

•If you need to turn off the machine,

press [ON/OFF (1 sec.)] for one second.

PLEASE WAIT

PUT IN CARTRIDGE

Approx. 30 seconds

You can connect an external

device (telephone or answering

machine) if necessary.

Connect the telephone line

cord to the wall jack.

Turn over to

continue

Turn over to

continue

Telephone or answering machine

Telephone and answering machine

Built-in computer modem and telephone

Connect external devices as follows:

Telephone

line Machine

Telephone

line Machine

Telephone or

answering machine

Telephone

line Machine

Computer

= Telephone line jack

= External device jack

Answering

machine

LINE TEL Telephone

Telephone

TELLINE

Set the receive mode as follows:

1On the operation panel, press [Fax], [Menu], then [Set].

Ex:

2Use [2] or [3] to select the receive mode:

•Select:

–<FAX/TEL AUTO SW> to receive both faxes and voice calls

(a telephone must be connected to the machine).

–<FAX ONLY MODE> to receive faxes only.

–<DRPD> if you have subscribed to a DRP (Distinctive Ring Pattern)

service offered by some companies. (For details, refer to the Quick

Reference Guide.)

–<MANUAL MODE> to answer all voice and fax calls manually

(a telephone must be connected to the machine).

–<ANS.MACHINE MODE> to receive faxes automatically and route

voice calls to an answering machine connected to your machine.

For more details on the different receive modes, refer to p. 9-1 of

the User’s Guide.

RECEIVE MODE

FAX/TEL AUTO SW

Load paper.

Place a stack of paper (print-side up) in the multi-purpose tray q.Pinch the paper

guide Aand adjust to the width of the stack w.Then place the tray cover Dover

the multi-purpose tray e.

NOTE

•You may have to move over the document cover cable Eto place the tray cover on the

multi-purpose tray.

•Make sure the stack does not exceed the paper limit mark Bor tab C.Otherwise a paper

jam may occur.

Install the printhead.

1Press [Open] qand lift up the scanning unit w.

IMPORTANT

• Do not touch the metal rod or any parts inside the

machine.

• The machine must be turned on when opening the

scanning unit.

2Remove the printhead from its packaging, then remove the orange protective

cap A.

IMPORTANT

•Do not touch the electrical contacts B.

3Raise the lock lever C,then gently slide the printhead into the holder.

Lower the lock lever.

IMPORTANT

• Do not lift the lock lever once the printhead has been installed.

Install the ink tanks.

1Start with the yellow ink tank. Pull the orange tape in the direction of the arrow

and remove the plastic wrapper so you can see the air hole A.Turn the ink tank

over so that the protective cap Bis facing up. Then hold the ink tank as shown

below and remove the protective cap B.

NOTE

•To avoid spilling ink, never

press on the long sides of

the ink tank C.

•Once you remove the

protective cap B,donot

touch the ink port D.

2Insert the ink tank (label-side up) into the correct slot (refer to the color guide on

the printhead). Press down gently on the ink tank until an audible click is heard.

3Repeat steps 1 and 2 to install the remaining magenta, cyan, and black ink tanks.

IMPORTANT

•Make sure the ink tanks are inserted

all the way into their slots.

4Close the scanning unit until it locks into place.

Align the printhead as explained in step 10.

Black

Yellow

Magenta

Cian

Black

BCI-3eC

BCI-3eBK BCI-3eM BCI-3eY

Yellow

Magenta

Cian

PUSHPUSHPUSH

PUSH

Black

BCI-3eC

BCI-3eBKBCI-3eM

BCI-3eY

Yellow

Magenta

Cian

PUSHPUSH

PUSH

Black

PUSH

Yellow

Magenta

Cian

Black

Correct position Incorrect position

Black Yellow

Magenta

Cian

Black

BCI-3eY

Yellow

PUSH

Black Yellow

Magenta

Cian

Black

BCI-3eY

Yellow

PUSH

PUSU

Yellow

MadeinJapan

Ink Tank

BCI-3eY

PULL

BCI-3eY

Ink Tank

Align the printhead.

NOTE

• You can also align the printhead from the software.

For details, refer to the Software Guide.

1When the LCD Adisplays the following, press [Set].

NOTE

•If a display other than <ALIGN

PRINT HEAD> appears, refer to

p. 9-5 of the Quick Reference

Guide to align the printhead.

The machine will print a horizontal pattern, and the LCD will display:

2In column A on the printout, note the value of the box with the most solid image.

Then use [2] or [3] on the operation panel to select that value.

Then press [Set].

3Repeat step 2 for columns B to K.

4When values for all columns have been entered and the LCD displays the following,

press [#] to return to standby mode.

NOTE

•If streaks appear on the printed

surface when you use the machine,

perform the vertical printhead

alignment. For details, refer to p. 9-5

of the Quick Reference Guide.

PRINT VERT. PATTERN?

YES=(A) NO=(#)

Most solid

box

Least solid

box

BAD

SAMPLE

GOOD

SAMPLE

Column A Value for column A

CHANGE H VALUE

A 0

ALIGN PRINT HEAD

PRESS SET KEY A

Connect the USB cable to complete the computer settings.

1Make sure the machine is turned on.

2Connect the USB cable Ato the machine and computer USB ports.

Depending on your computer, a message may display asking you to restart your

computer. If this is the case, restart your computer.

●Install Utility Software

To install the Utility Software, in the [MP Setup] screen,

click [Install Utility Software].

You can choose not to install the Utility Software at this

stage and install it later. For details, refer to p. IV of the

Quick Reference Guide.

●View User’s Manual

To read the manual on the CD-ROM, click [View User’s

Manual] on the [MP Setup] screen.

CAUTION

• For Windows 2000, the machine may not be able to be set as the default printer.

If that happens, refer to “Setting the default printer” in the Software Guide.

Congratulations! You have now completed your machine

setup.

Where to go from here...

Once you have completed all steps in this Set-Up Sheet, refer to the Quick Reference

Guide for basic operation instructions of all functions of your machine.

If after reading the Quick Reference Guide you require more detailed information,

refer to the User’s Guide or Software Guide (included in the CD-ROM).

NOTE

•Remember to register your machine to ensure product support. The serial number is

located on the back of the machine. Refer to the Quick Reference Guide for information on

the software included on the CD-ROM.

Part no. HT3-2129-000-V.2.0

Canon, MultiPASS, and BCI are trademarks of Canon Inc.

All other products and brand names are registered

trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

PRINTED IN THAILAND

Otros manuales para MP730 - MultiPASS Color Inkjet

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon i-SENSYS MF6180dw Manual de usuario

Canon

Canon MP560 - PIXMA Color Inkjet Manual de usuario

Canon

Canon PIXMA MP495 Series Manual de usuario

Canon

Canon PIXMA MX522 Hoja de información del producto

Canon

Canon imageClass DL370 Guía de seguridad

Canon

Canon IMAGECLASS MF249dw Manual de usuario

Canon

Canon imageRUNNER 3300 Series Manual de usuario

Canon

Canon PIXMA MX392 Manual de usuario

Canon

Canon PIXMA MP600 Manual de usuario

Canon

Canon imageRunner iR2270 Manual de usuario

Canon

Canon ImageCLASS MF4570dw Guía del usuario

Canon

Canon iR3530 Manual de referencia

Canon

Canon C3000 - MultiPASS Color Inkjet Printer Manual de usuario

Canon

Canon PIXMA MP160 Manual de usuario

Canon

Canon MultiPASS C530 Manual de usuario

Canon

Canon 2184B002 Manual de usuario

Canon

Canon im2520f Manual de usuario

Canon

Canon imageRUNNER ADVANCE C9075S PRO Manual de usuario

Canon

Canon imageRUNNER 5075 Manual de usuario

Canon

Canon imageRUNNER Advance C2030i Instrucciones de montaje

Canon

Canon imageRUNNER ADVANCE C5255 Instrucciones de montaje

Canon

Canon TS6400 Series Manual de usuario

Canon

Canon SmartBase MPC600F Manual de usuario

Canon

Canon MF7280 - ImageCLASS B/W Laser Manual de instalación y operación

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario