Cabletron Systems Netlink FRX4000 Manual de usuario

User Guide

For Release 4.0

09-41-06-162-01

FRX

6000

Frame Relay Access Products

FRX

4000

FRX

The Complete Networking Solution

iii

Cabletron Systems reserves the right to make changes in specifications and other information

contained in this document without prior notice. The reader should in all cases consult

Cabletron Systems to determine whether any such changes have been made.

The hardware, firmware, and/or software described in this manual is subject to change without

notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL,

INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER

(INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR

RELATED TO THIS MANUAL OR THE INFORMATION CONTAINED IN IT, EVEN IF

CABLETRON SYSTEMS HAS BEEN ADVISED OF, KNOWN, OR SHOULD HAVE

KNOWN, THE POSSIBILITY OF SUCH DAMAGES.

States of America. Order Number: FRX4/6-USR-DOC.

VxWorks is a copyright of Wind River Systems, Inc.

California, Berkeley, and its contributors. IP software is provided by the regents and contrib-

utors “as is” and any express or implied warranties, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose, are disclaimed. In no event

shall the regents or contributors be liable for any direct, indirect, incidental, special, exem-

plary,or consequential damages(including, butnotlimited to,procurementof substitute goods

or services; loss of use, data, or profits; or business interruption) however caused and on any

theory of liability, whether in contract, strict liability, or tort (including negligence or oth-

erwise) arising in any way out of the use of this software, even if advised of the possibility of

such damage.

Gateway Daemon (GateD) software, Release 3.5.5, is maintained and developed by Cornell

University and its collaborators. The version of GateD used with this Cabletron product has

been modified.

Netlink is a trademark of Cabletron Systems, Inc. All other product designations are the

property of their respective owners.

Statements of Compliance

FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference,and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial envi-

ronment. This equipment uses, generates, and can radiate radio frequency energy and if not

installed in accordance with the operator’s manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause inter-

ference in which case the user will be required to correct the interference at his own expense.

Changes or modifications made to this device which are not expressly

approved by Cabletron Systems could void the user’s authority to

operate the equipment.

iv FRX4000/FRX6000 4.0 User Guide, Rev 01

DOC Thisdigital apparatus does not exceed the Class A limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of Com-

munications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la class A prescrites dans le Règlement sur le

brouillage radioélectrique édicté par le ministère des Communications du Canada.

About This Manual

Rev Date Reason for Update

01 March 1998 General availability

This manual supplements screen prompts andmenus as an aid in configuring the database and

performing system operations on a Netlink FRX4000 or FRX6000. Before using the manual,

you should befamiliar with FRX hardware, as well asthe protocols (framerelay, IP,SNA, etc.)

you will be using.

Terminology and Conventions

This typeface represents general text. This typeface represents keyboard input and video output.

(This text is dark cyan in on-screen versions of the manual, and black in paper versions.)

In on-screen versions of the manual, items in blue are links to other places in the manual.

Thissymbol pointsto an informational noterelating to thetext,table,or figurethat

immediately precedes or follows it.

This symbol and text identifies a cautionary note, the content of which

is more critical to heed than an informational note.

The following references to keyboard keys appear in the manual and/or on the screen:

[N] is a reference to a key on your keyboard (where “N” is the key).

Enter means that you should type in the information, then press the [Enter] key.

Type is similar to Enter, except that the word “[Enter]” follows the information to be

typed (e.g., “type n [Enter]”).

Press means press (hit, strike) the key once. Pressing the [Enter] key afterwards is not

necessary.

[Ctrl] followed by one or two other key designations, must be struck simultaneously

with the other keys shown.

If astatement ends witha reference to a key—for example, “....then press [Enter].”—the period

is not part of the data to be entered. If a period should be entered, it will be shown as [.]. The

same applies to all other punctuation.When instructed to, forexample, “press [A], [B] from the

Main Menu,” this means press [A], then [B], not [A] comma [B].

Screen Displays

Screen Displays are provided to show the general appearance of actual screens. They are only

examples—the information shown is not always representative of an operational system.

Table of Contents

Section I Getting Started

Chapter 1 Product Overview

Introduction to Netlink FRX4000 and FRX6000..................................... 1-1

Multiprotocol Support........................................................................ 1-2

Management Functions...................................................................... 1-2

Hardware Overview ................................................................................. 1-3

FRX4000............................................................................................ 1-3

FRX6000............................................................................................ 1-4

Chapter 2 Getting Started

Quick Start................................................................................................ 2-1

Port Assignment Worksheets ................................................................... 2-2

FRX4000............................................................................................ 2-2

FRX6000............................................................................................ 2-3

Logging into the Main Menu.................................................................... 2-6

Reviewing Boot Messages................................................................. 2-7

Moving Through the Menus.............................................................. 2-8

Setting the Date and Time...................................................................... 2-11

Changing the Login Password................................................................ 2-11

Stopping Operation................................................................................. 2-12

Logging Out..................................................................................... 2-12

Rebooting......................................................................................... 2-12

Shutting Down................................................................................. 2-12

What Next?............................................................................................. 2-12

Section II Configuration

Chapter 3 Introduction to Database Configuration

Database Setup Recommendations .......................................................... 3-1

Configuration Examples........................................................................... 3-2

Legacy Protocols over Frame Relay via Logical Ports...................... 3-2

Frame Relay PVC Passthrough.......................................................... 3-3

LLC2 PUs over Frame Relay to AS/400........................................... 3-3

3x74s/SDLC over Frame Relay to SNA Host ................................... 3-8

Producing a Configuration Report ......................................................... 3-10

Where to Find Configuration Information ............................................. 3-10

Chapter 4 Configuring Node-Wide Default Parameters

Node Defaults........................................................................................... 4-1

Database and System Memory Values .............................................. 4-2

Node Defaults Parameters ................................................................. 4-3

Warning Messages ................................................................................. 4-10

Chapter 5 Configuring Cards and Protocols

FRX4000 .................................................................................................. 5-1

Protocols and LIC.............................................................................. 5-1

LAN Port............................................................................................ 5-6

vi FRX4000/FRX6000 4.0 User Guide, Rev 01

FRX6000.................................................................................................. 5-7

RLPs and Protocols............................................................................ 5-7

LAN Cards....................................................................................... 5-14

Chapter 6 Configuring Physical Ports

Locations of Physical Ports...................................................................... 6-1

FRX4000............................................................................................ 6-1

FRX6000............................................................................................ 6-2

Database and System Memory Values..................................................... 6-3

Configuring a Physical Port ..................................................................... 6-3

Chapter 7 Configuring Frame Relay

Introduction.............................................................................................. 7-1

DLCI Sharing..................................................................................... 7-2

Frame Relay Backup.......................................................................... 7-2

Required Configuration ..................................................................... 7-5

Configuring Bandwidth Allocation Groups............................................. 7-6

Bandwidth Allocation Group Parameters.......................................... 7-7

Configuration Example...................................................................... 7-8

Configuring Frame Relay Ports................................................................ 7-9

Reviewing DLCI Configuration (Figure 7-4, Item C)..................... 7-10

Configuring DLCI Parameters (Figure 7-4, Item D)....................... 7-12

Viewing Learned DLCIs (Figure 7-4, Item E) ................................ 7-13

Frame Relay Port Parameters .......................................................... 7-14

Configuring Frame Relay PVCs Across the Node................................. 7-20

Frame Relay PVC Parameters......................................................... 7-21

Configuring Frame Relay Backup Groups............................................. 7-22

Backup Group Parameters............................................................... 7-23

Chapter 8 Configuring X.25

Introduction.............................................................................................. 8-1

Required Configuration ..................................................................... 8-2

Configuring a Physical X.25 Port ............................................................ 8-2

Configuring Closed User Groups ...................................................... 8-4

Configuring a Network Trunk ........................................................... 8-5

Configuring a Dial Port ..................................................................... 8-6

Physical X.25 Port Parameters .......................................................... 8-6

Configuring Logical X.25 Ports............................................................. 8-14

Logical Port Parameters................................................................... 8-15

Configuring Subscriber IDs ................................................................... 8-21

Subscriber Addressing..................................................................... 8-22

Hunt Group Example....................................................................... 8-24

Subscriber Parameters...................................................................... 8-25

Configuring X.25 Address Translation Templates ................................ 8-27

Translation Template Parameters .................................................... 8-30

Replacing Called/Calling Address or User Data ............................. 8-30

Replacing Protocol ID ..................................................................... 8-31

Replacing Facilities ......................................................................... 8-31

Translation Examples ...................................................................... 8-32

Testing a Translation Template ....................................................... 8-32

Configuring X.25-to-X.25 PVCs ........................................................... 8-33

vii

X.25 PVC Parameters...................................................................... 8-34

Chapter 9 Configuring SNA

Introduction.............................................................................................. 9-1

Required Configuration ..................................................................... 9-3

Configuring an SNA Port......................................................................... 9-4

SNA Port Parameters......................................................................... 9-6

Configuring Subscriber IDs.................................................................... 9-14

Subscriber Parameters...................................................................... 9-15

Configuring a Hunt Group for SNA Subscribers............................. 9-17

Configuring LLC2.................................................................................. 9-17

Configuring a Virtual LAN ID ........................................................ 9-17

Configuring LLC2 Hosts................................................................. 9-18

Configuring LLC2 Interfaces........................................................... 9-26

Chapter 10 Configuring BSC Interactive

Introduction............................................................................................ 10-1

Configuring BSC Interactive Port Records............................................ 10-2

BSC Interactive Port Parameters ..................................................... 10-4

Configuring Subscriber IDs.................................................................... 10-8

Subscriber Parameters...................................................................... 10-9

Configuring BSC Interactive Devices.................................................. 10-11

BSC Interactive Device Parameters............................................... 10-12

Chapter 11 Configuring BSC Batch

Introduction............................................................................................ 11-1

Configuring BSC Batch Port Records.................................................... 11-2

BSC Batch Port Parameters............................................................. 11-3

Configuring Subscriber IDs.................................................................... 11-8

Subscriber Parameters...................................................................... 11-9

Chapter 12 Configuring Async Ports

Introduction............................................................................................ 12-1

Configuring Async PAD Profiles........................................................... 12-2

PAD Profile Parameters................................................................... 12-2

Configuring Async PAD Login Parameters........................................... 12-6

PAD Login Parameters.................................................................... 12-7

Configuring Async Port Records ........................................................... 12-8

Async PAD Port Parameters .................................................................. 12-9

Configuring Subscriber IDs.................................................................. 12-15

Subscriber Parameters.................................................................... 12-16

Configuring Abbreviated Addresses.................................................... 12-17

Configuring Async PVCs..................................................................... 12-18

Async PVC Parameters.................................................................. 12-19

Chapter 13 Configuring IP

Introduction............................................................................................ 13-1

IP Addressing................................................................................... 13-1

Using the Node as an IP Gateway ................................................... 13-3

Required Configuration ................................................................... 13-3

Configuring IP Node Defaults................................................................ 13-4

IP Node Defaults Parameters........................................................... 13-5

viii FRX4000/FRX6000 4.0 User Guide, Rev 01

Configuring IP Interfaces....................................................................... 13-5

IP Interface Parameters.................................................................... 13-8

Configuring Static IP Routes................................................................ 13-15

IP Routing Parameters................................................................... 13-16

Chapter 14 Configuring IPX

Introduction............................................................................................ 14-1

Required Configuration ................................................................... 14-1

Configuring IPX Node Defaults............................................................. 14-2

IPX Node Defaults Parameters........................................................ 14-2

Configuring IPX Filters.......................................................................... 14-3

Configuring Filter Definitions......................................................... 14-3

Configuring IPX Filter Applications ............................................... 14-8

IPX Filter Applications Parameters................................................. 14-9

Configuring IPX Interfaces.................................................................... 14-9

IPX Interface Parameters............................................................... 14-10

Parameter Descriptions.................................................................. 14-13

Configuring Static IPX Routes............................................................. 14-16

IPX RIP Static Route Parameters .................................................. 14-17

IPX SAP Static Route Parameters................................................. 14-18

Chapter 15 Configuring Bridging

Introduction............................................................................................ 15-1

Required Configuration ................................................................... 15-2

Configuring Default Node-Wide Bridging Parameters.......................... 15-3

Bridge Node Default Parameters..................................................... 15-4

Configuring Bridge Filters ..................................................................... 15-6

Configuring Filter Definitions......................................................... 15-6

Configuring Bridge Filter Applications......................................... 15-10

Configuring Bridge Ports ..................................................................... 15-12

Bridge Port Parameters.................................................................. 15-13

Chapter 16 Configuring SNMP

Introduction............................................................................................ 16-1

Configuring SNMP System Defaults..................................................... 16-2

System Defaults Parameters ............................................................ 16-2

Configuring a Community Table ........................................................... 16-3

Community Table Parameters ......................................................... 16-4

Configuring Trap Routing...................................................................... 16-4

Trap Routing Parameters................................................................. 16-5

Configuring a Model Number................................................................ 16-6

Section III Operation

Chapter 17 Introduction to System Operation

Chapter 18 On-line Operations

Remote Control ...................................................................................... 18-1

Remote Control from an FRX4000/6000 ........................................ 18-2

Remote Control via an Async PAD Port......................................... 18-3

Transferring Files and Updating Software............................................. 18-4

Remote File Transfer ....................................................................... 18-4

Remote Software Update................................................................. 18-5

Backing Up and Restoring Files............................................................. 18-6

Database Backup and Restore.......................................................... 18-6

Copying an FRX4000 Directory to/from a PC................................ 18-8

FRX4000 Local File Backup and Restore....................................... 18-9

Enable/Disable Operations................................................................... 18-12

Disabling and Enabling Ports ........................................................ 18-12

Quiescing and Unquiescing Ports.................................................. 18-13

Disabling and Enabling SDLC PUs............................................... 18-14

Tests...................................................................................................... 18-15

IP Ping Connectivity Test.............................................................. 18-15

FRX4000 CSU/DSU Tests ............................................................ 18-16

Reloading Auxiliary Console Initialization.......................................... 18-16

Initiating Frame Relay Backup Switchover/Switchback...................... 18-17

Chapter 19 Status Displays

Displaying Node Status.......................................................................... 19-1

Displaying Port Status............................................................................ 19-2

Displaying Virtual Connections............................................................. 19-3

Displaying Port Signals.......................................................................... 19-6

Monitoring Traffic.................................................................................. 19-7

Serial Ports....................................................................................... 19-7

Monitoring LAN Traffic................................................................ 19-17

Displaying Frame Relay Backup Status............................................... 19-19

Displaying SDLC PU Status ................................................................ 19-20

Displaying LLC2 Session Status.......................................................... 19-21

Bridge Status Displays ......................................................................... 19-21

Bridge Port Status.......................................................................... 19-21

Bridge Forwarding Table............................................................... 19-23

IP Status Displays................................................................................. 19-24

IP Routing Table............................................................................ 19-24

ARP Table...................................................................................... 19-25

IP Interfaces................................................................................... 19-25

IPX Status Displays.............................................................................. 19-27

RIP Table ....................................................................................... 19-27

SAP Table...................................................................................... 19-27

Chapter 20 Statistics Displays

RLP Statistics ......................................................................................... 20-1

Configuring RLP Statistics Thresholds ........................................... 20-2

Port Statistics.......................................................................................... 20-3

Configuring Port Statistics Thresholds............................................ 20-4

Frame-level Statistics............................................................................. 20-5

Frame Relay Utilization Statistics.......................................................... 20-6

LAN Card Statistics Displays................................................................. 20-8

Bridge Port Statistics............................................................................ 20-10

IP Statistics Displays............................................................................ 20-12

IP Statistics .................................................................................... 20-12

ICMP Statistics .............................................................................. 20-13

IP Interface Statistics..................................................................... 20-16

IPX Statistics Displays......................................................................... 20-17

xFRX4000/FRX6000 4.0 User Guide, Rev 01

Chapter 21 System Events

Configuration ......................................................................................... 21-1

Alarm Buffer .......................................................................................... 21-2

Event Generation.................................................................................... 21-3

Displaying Events .................................................................................. 21-3

Severity Levels for SNMP Trap Routing............................................... 21-4

Event Messages...................................................................................... 21-4

Messages.......................................................................................... 21-4

Section IV Appendices

Appendix A Async Terminal Operations

Command and Data Transfer Modes....................................................... A-1

Async Terminal Commands.................................................................... A-2

Placing a Call from an Async Terminal.................................................. A-2

Async PAD Service Signals.................................................................... A-3

Error Codes Sent to Async PAD Port ..................................................... A-5

Appendix B Cause and Diagnostic Codes

Cause Codes............................................................................................. B-1

Clearing Causes ................................................................................. B-1

Reset Causes ...................................................................................... B-2

Restart Causes.................................................................................... B-2

Diagnostic Codes...................................................................................... B-2

X.25 Codes ........................................................................................ B-2

SNA Codes ........................................................................................ B-4

Codes Specific to Cabletron Frame Relay Access Devices............... B-4

Appendix C NetView Management

Local NetView Access............................................................................. C-2

Supported Commands .............................................................................. C-3

Display Commands............................................................................ C-3

Vary Commands ................................................................................ C-4

Modify Commands............................................................................ C-4

Appendix D ASCII Character Table

Appendix E Menu Structure

Glossary

Index

Otros manuales para Netlink FRX4000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Cabletron Systems

Cabletron Systems

Cabletron Systems 1082 Manual de usuario

Cabletron Systems

Cabletron Systems 9C300-1 Guía de inicio rápido

Cabletron Systems

Cabletron Systems HSIM HSIM-G01 Manual de usuario

Cabletron Systems

Cabletron Systems SWPIM-E1 Manual de usuario

Cabletron Systems

Cabletron Systems CSMIM-T1 Manual de usuario

Cabletron Systems

Cabletron Systems VHSIM-G02 Manual de usuario

Cabletron Systems

Cabletron Systems WPIM-RT1 Manual de usuario

Cabletron Systems

Cabletron Systems CBUPRI/E1 Manual de usuario

Cabletron Systems

Cabletron Systems Netlink FRX4000 Instrucciones de montaje

Cabletron Systems

Cabletron Systems Netlink FRX4000 Manual de funcionamiento

Cabletron Systems

Cabletron Systems TRXI-22 Instrucciones de instalación y funcionamiento

Cabletron Systems

Cabletron Systems MMAC-5FNB Manual de usuario

Cabletron Systems

Cabletron Systems 6C105 Manual de operación y mantenimiento

Cabletron Systems

Cabletron Systems BRIM-W6 Manual de usuario

Cabletron Systems

Cabletron Systems HSIM HSIM-A6DP- Manual de usuario

Cabletron Systems

Cabletron Systems TRXMIM-24A Manual de usuario

Cabletron Systems

Cabletron Systems MMAC-M8FNB Manual de usuario

Cabletron Systems

Cabletron Systems ELS10-26 Manual de usuario

Cabletron Systems

Cabletron Systems FDCMIM-24 Manual de usuario

Cabletron Systems

Cabletron Systems Netlink FRX8000 Instrucciones de montaje

Cabletron Systems

Cabletron Systems Environmental Module TM 9C300-1 Manual de usuario

Cabletron Systems

Cabletron Systems Cabletron BRIM-F6 Manual de usuario

Cabletron Systems

Cabletron Systems HSIM-W87 Manual de usuario

Cabletron Systems

Cabletron Systems MMAC-Plus 9G536-04 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario