Bushnell X-8 TRAIL CAM 119327 Manual de usuario

X-8 TRAIL CAM™

INSTRUCTION MANUAL

Model 119327

Lit# 98-2334 / 05-12

Manuel d’instructions / Manual de instrucciones

Bedienungsanleitung / Manuale di istruzioni

TABLE OF CONTENTS PAGE

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

3-26

27-51

52-76

77-102

103-126

Page Index

IMPORTANT NOTE 4

Introduction 5

Parts & Controls Guide 6-7

Battery and SD Card Installation 8

About the Setup Menu 9

Using the Setup Menu 9

SETUP MENU REFERENCE TABLE 10-12

Time Lapse Operation 13

Camera Operation 15

Mount the Camera 15

Power on the Camera 15

Set the PIR and Shutter Switches 16

Test the Coverage Area 16

Secure the Camera 16

(Optional) Using an External Power Source 17

Viewing the Photos and Videos 17

Glossary 18

Technical Specications 19

Troubleshooting/FAQ 20-23

Warranty 24

English

IMPORTANT NOTE

Congratulations on your purchase of one of the best trail cameras on the

market! Bushnell is very proud of this camera and we are sure you will

be pleased with yours as well. We appreciate your business and want to

earn your trust. Please refer to the notes below and the instructions in

this manual to ensure that you are completely satised with this product.

If your Bushnell Trail Cam does not seem to be functioning properly

or if you are having photo/video quality issues, please check the

Troubleshooting/FAQ section on pages 20-23.

Problems are often due to something simple that was overlooked, or

require only changing one setting to solve.

If your problem continues after trying the solutions in the

Troubleshooting/FAQ section, please call Bushnell Customer Service

at (800) 423-3537. In Canada, call (800) 361-5702.

Bushnell recommends using 8 Energizer® Lithium AA batteries in this

Trail Cam to obtain maximum battery life.

Do Not Mix Old and New Batteries

Do not mix battery types-use ALL lithium or ALL alkaline.

Rechargeable batteries are not recommended.

Bushnell recommends using SanDisk® SD and SDHC Cards

(up to 32GB capacity) in this Trail Cam.

INTRODUCTION

Congratulations on your purchase of a Bushnell X-8 Digital Trail Camera.

This camera is designed to record animal activity in the outdoors with

its still image and movie modes and weatherproof, rugged construction.

Your X-8 Trail Cam features a compact, portable size and an extra long

battery life.

Main Features:

• 2.0MP digital sensor

• Compact Size (120mm*94mm*46mm)

• Long Battery Life (Up to 9 months)

• Trigger Time=1.0 seconds or less

• Automatic IR Filter

• LCD Display

• 36 Night Vision LEDs

• Adjustable Photo Delay: 1~ 59 seconds ,1~ 10mins (default 10S)

• Multiple Shot Mode (3 images per trigger)

• 640*480 at 30 FPS Videos, 5 -15 seconds ea.

• Adjustable PIR Sensitivity (Lo, Med, Hi)

• Time-Lapse mode captures images at user set interval

(1-60 min)

• Supports up to 32 GB SD Card

• Date, Time & Moon Phase Imprint

• Auto Exposure

• Auto White Balance

• Power Supply: 4 or 8 AA batteries (lithium or alkaline), DC input jack

for 6 volt external power source (optional, user supplied).

• Mounting Socket for Standard Tripods

• Weatherproof

• User selectable shutter speed to reduce blur or adjust exposure

PARTS AND CONTROLS GUIDE

Front of Camera

Camera

Lens

Infrared

LED Array

PIR Motion

Sensor

Tripod

Socket

Padlock

Hole

PIR

Indicator

(Setup

Mode

Only)

(DC Power In Jack

under rubber pad)

DC Input

Jack

PARTS AND CONTROLS GUIDE

Control Panel

(Front Opened)

USB Port

SD Card

Slot

LCD

Display

Power

Switch

Setup

Button

Battery

Compartment

TV Out

PIR

Sensitivity

Switch

Button

Down

Button

Shutter Speed

Switch

Button

USB Port TV Out

Left Side Panel

(Front Opened)

BATTERY and SD CARD INSTALLATION

The Bushnell X-8 Digital Trail Camera is designed to operate using 4 or 8

AA batteries. We recommend using a full set of 8 Lithium (for longest life)

or Alkaline batteries.

NOTE: Always set the power switch to the O position when installing or

removing batteries.

Please make sure the batteries are inserted correctly, as indicated inside

the battery compartment. Incorrect voltage or polarity (+/-) will damage

the camera. The battery level meter on the top right of the display will

indicate when the internal batteries are low.

Do not mix old and new batteries.

Do not mix battery types-use ALL lithium or ALL alkaline.

Rechargeable batteries are not recommended.

Memory

Your X-8 Digital Trail Camera has a memory card slot, to accept SD cards

(sold separately) up to 32GB maximum capacity. If no SD card is inserted,

the display will ash“NOSD”, and the camera will not operate.

Inserting an SD card

• Make sure the power switch is in the O position whenever adding

or removing memory.

• Insert an SD card into the card slot completely and oriented correctly

as shown by the icon above the slot (label up, contacts facing down

and notched corner on the right).

• To remove the SD memory card, depress the SD card and pull out

the card gently.

Using a new, blank SD card is recommended. If the SD card has been used

in another device, please make sure to format using the Format option

in the X-8 trail cam’s Setup menu before you set the camera to capture

photos/videos. New cards are ready to use straight from the package.

ABOUT THE SETUP MENU

Slide the power switch to the On position.You’ll see“WAIT”on the display,

then the Setup Menu screen (see below). Before you start using the

camera, you’ll no doubt want to set the date/time so they are imprinted

correctly on your photos, and maybe change the trigger delay time and

image resolution to your preferences. This is done by editing the settings

of an item listed in the Setup Menu.

To enter the Setup Menu at any time, press the Setup button (far left side

of the control panel).

USING THE SETUP MENU

The Setup Menu has 5 dierent items, which appear on a list in the left

frame of the display. Here’s how to edit (change) the setting of a menu

item:

1. Select the menu item you want to edit by pressing the Up or Down

button until the item is blinking. Note: you can see the current/

default setting for each item (without changing it) in the main center

frame as you move up and down the list of items.

2. Press the Ok button.

3. You can now select the setting you prefer for the selected item

by pressing the Up or Down button. The setting displayed in the

center frame will blink until you press Ok to conrm it is the setting

you want to save.

4. To exit the Setup menu at any time, simply press the Setup button.

SETUP MENU SCREEN

SELECTED

ITEM

CURRENT

SETTING OF

SELECTED ITEM

Indicates Photo (1P or 3P) or Movie Mode

Battery Level

Menu Item Settings

(Bold=default)

Description/Operation

T- Lapse

(Time Lapse

mode

settings)

T-Delay time,

Duty (Start and

Stop times)

Press Ok-”T-Delay”will ash.

Set the T-Delay time from 1-60

Minutes, using the Up/Down

buttons. The T-Delay parameter

sets how often photos or videos

are captured during the “Duty”

interval. Press Ok-the display will

ash“Duty”. Use Up/Down to

set the start hour (24 hr format,

from 00:00 to 23.00 hours). Press

Ok and use Up/Down to set the

start minute (:00-:59). Press Ok

and repeat the process to set the

stop hour and minute. The Duty

settings determine the“window”

or block of time when photos/

videos will be captured, without

requiring a PIR trigger from a

live animal. Example: T-Lapse

operation (Duty cycle) from

5:30AM to 8:00AM, at 7 minute

intervals. NOTE: if you don’t

want the camera to operate in

Time Lapse mode, be sure that

the T-Delay time is set to “OFF”.

The following table lists all of the menu items, their available settings,

and a description of their functions:

SETUP MENU: Items/Settings/Description

Tabla de contenidos

Idiomas:

Otros manuales de Cámara de exploración de Bushnell

Bushnell

Bushnell CELLUCORE 30 Manual de usuario

Bushnell

Bushnell TROPHY CAM HD VITAL 119726C Manual de usuario

Bushnell

Bushnell TRAIL SENTRY 11-9000 Manual de usuario

Bushnell

Bushnell 119432CW Manual de usuario

Bushnell

Bushnell CELLUCORE 20 Manual de usuario

Bushnell

Bushnell TROPHY CAM HD ESSENTIAL 119736C Manual de usuario

Bushnell

Bushnell TRAIL SENTRY 11-9200 Manual de usuario

Bushnell

Bushnell 66060WM Manual de usuario

Bushnell

Bushnell TROPHY 119598 Manual de usuario

Bushnell

Bushnell Trophy Cam HD Aggressor 119875 Manual de usuario

Bushnell

Bushnell 119636C Manual de usuario

Bushnell

Bushnell Trophy Cam 119676C Manual de usuario

Bushnell

Bushnell 119439 Manual de usuario

Bushnell

Bushnell TRAIL SENTRY 119303 Manual de usuario

Bushnell

Bushnell 119734C Manual de usuario

Bushnell

Bushnell NatureView 119739 Manual de usuario

Bushnell

Bushnell TROPHY CAM HD AGRESSOR 119873C Manual de usuario

Bushnell

Bushnell TROPHY CAM Manual de usuario

Bushnell

Bushnell Trail Scout 11-9600 Manual de usuario

Bushnell

Bushnell TROPHY CAM 119425C Manual de usuario

Bushnell

Bushnell TRAIL SENTRY 11-9000 Manual de usuario

Bushnell

Bushnell PRIME L20 Manual de usuario

Bushnell

Bushnell TROPHY CAM 119537 Manual de usuario

Bushnell

Bushnell Trophy Cam 119636C Manual de usuario

Manuales populares de Cámara de exploración de otras marcas

Nestbox

Nestbox C13 Manual de usuario

Wildview

Wildview STC-TGL1 Manual de usuario

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manual de usuario

Suntek

Suntek HC-800M Manual de usuario

Spypoint

Spypoint G4 Manual de usuario

Duramaxx

Duramaxx 10029765 Manual de usuario

Brecom

Brecom C2400 Manual de usuario

BlazeVideo

BlazeVideo A280W Manual de usuario

Bestok

Bestok 5210GM Manual de usuario

GardePro

GardePro X60P Manual de usuario

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manual de usuario

PNI

PNI HUNTING 280C Manual de usuario

Muddy

Muddy Pro-Cam 14 Manual de usuario

Bresser

Bresser 3310006 Manual de usuario

Recon Outdoors

Recon Outdoors HS410 Manual de usuario

Braun

Braun 57660 Manual de usuario

Wildgame

Wildgame Shadow Manual de usuario

Spypoint

Spypoint FLEX Manual de usuario