BURY CC 9060 Time Manual de usuario

Index

Introductory information 2

1. General 2

2. Security guidelines 2

Installation of the hands-free car kit 4

3. Scope of supply 4

4. Positioning and mounting 6

5. Connections on the electronics box 9

6. Installation of the loudspeaker switch box AC 5120 13

Operating guidelines 17

7. Using the hands-free car kit for the first time 17

8. Handling possibilities 18

9. Voice control 18

10. Handling via Touch screen 20

11. Establishing a

Bluetooth

connection 21

12. Menu navigation 22

13. Electronic driver‘s logbook 43

14. Accepting, making, ending calls 45

15. Transferring Calls 46

16. Conference Mode 47

Further Information 48

17. Service 48

18. Appropriate use of this system 49

19. Approvals and declaration of conformity 49

CC 9060 Time

1. General

Dear customer,

Congratulations on purchasing a BURY hands-free car kit. You have chosen a high quality product that

is extremely easy to use.

Please read the operating manual carefully so that you can fully enjoy your BURY hands-free car kit.

If you have any further questions concerning installation or operation of your car kit, please contact

your dealer. He will be happy to give you reliable advice.

You can also contact our hotline. Our phone and fax numbers are listed in the chapter Service at the

end of the operating instructions.

Have a good trip!

2. Security guidelines

Installation - who and where

We recommend to let a specialised workshop perform the installation.

Only professionals will observe the installation requirements of the au-

tomotive manufacturer (VAS 1978) correctly.

Power supply

This system has been designed for the use in vehicles with an on-board

supply system of 12 volts (passenger car). If you intend to install the

device in a vehicle with an on-board supply system of 24 volts (lorry),

please use a voltage converter. If you have queries regarding this sub-

ject, please contact our hotline.

Position, volume

Install the components of the device in the vehicle so that your field of

vision is not impaired and the components are not mounted in the im-

pact zone of the passenger compartment or in the airbag inflation

zones. The removal of coverings (with and without airbags) or compo-

nents of the dashboard requires – in some cases – special tools and

special knowledge.

Introductory information

Intended use

We shall not be liable for damages or malfunctions due to improper use

of the hands-free system. Therefore, do not expose the device to mois-

ture, extreme temperatures or shocks and carefully follow the proce-

dure described in the installation and operating guidelines.

Use while driving

Operate the system only when the situation allows it and when you do

not endanger, harm, constrain, or annoy other road users. The volume

of the device has to be set in a way that exterior noise is still audible.

Faults

Do not commission the device if you detect or assume a defect. In this

case, contact a Bury specialised dealer or our hotline. Improper repair

efforts can be dangerous for you. Therefore, only skilled personnel may

perform inspections.

Important:

The driver is ultimately responsible for the safe operationX

and control of their vehicle at all times. You should never

use a hand held phone, including sending or reading text or

picture messages, while driving.

Research indicates that there is a risk to safety when theX

driver of a motor vehicle is distracted and using a mobile

phone while driving can be a distriction.

The manufacturer strongly recommends that you useX

a hands-free solution when driving.

DVD

150 cm

Installation of the hands-free car kit

3. Scope of supply

The hands-free car kit (HFCK) is supplied with different combinations of components, depending on

the sales regions (countries). The operating manual refers to all versions.

Description of the components:

1) Electronics box

2) Monitor, holder and installation pad

3) Mounting accessories

Fixing screws for electronics box, rider, screws for the holder and rubber cover, cleaning cloth

4) Microphone

5) Installation and Operating manual, software on DVD, printed Quick user guide

6) USB cable

7) External loudspeaker switch box AC 5120

8) Power supply cable with fuses

9) External loudspeaker

10) Loudspeaker connection cable

Version 1:

- Electronics box without integrated loudspeaker switch box

- with external loudspeaker switch box AC 5120

Version 2:

- Electronics box without integrated loudspeaker switch box

- with power supply cable

- with loudspeaker connection cable

Version 3:

- Electronics box with integrated loudspeaker switch box

- with power supply cable

- with loudspeaker connection cable

Note:

If certain components are added or omitted you will receive the corresponding informa-X

tion on a separate enclosure.

6Installation of the hands-free car kit

Step 1:

First of all, please choose the most convenient position for the attached

monitor on the holder and the installation pad in your vehicle by check-

ing different positions in the vehicle.

If you would like to use the device during your journey, positioning it in

the front area on the driver’s side is advisable. Sit in the vehicle and

check whether you can reach the device without difficulty.

To produce an electronic log, position data is required from your vehi-

cle. This is provided via NAVSTAR GPS, a global navigation satellite

system for determining position and timing, and is received by a GPS

receiver in the monitor. Therefore make sure when placing the device

that it can receive data of this kind, if possible via the windscreen.

When there is sufficient reception of GPS signals, the symbol of a dish

antenna appears in the main menu in the upper right-hand corner of

the display. If the reception is interrupted for a short time, e.g. when

driving through a tunnel, the symbol flashes.

Important:

Please note that heat insulation glass with vapor depos-X

ited metal layer blocks signals from outside to inside and

vice versa. Take a look at the vehicle documents to find out

about its equipment, as regards the windows.

Check the GPS reception of the system, before you firmlyX

install the installation pad.

GPS reception is usually impaired in underground garagesX

and in roofed parking areas.

4. Positioning and mounting

After having found a suitable position for the monitor in the vehicle you can mount / attach the the

installation pad / the holder accordingly. Please use a cleaning cloth for degreasing the surfaces you

want to attach the installation pad to.

The end of the cable with the small Molex plug is ideally suited for placing through small openings in

the dashboard area. This facilitates a practically invisible installation of the cable. Take the length of

the cable into account and make sure that it is of sufficient length to reach the intended location of the

electronics box.

Important:

When positioning the monitor please take care that the monitor does not impair theX

view onto the road, that it will not be installed in the impact zone of the passenger

compartment (amongst others in the airbag inflation zones) and that cables may be laid

without any problems.

The installation pad can be affixed just once, removing could damage the adhesiveX

area. In case of high variations in temperatures - depending on the structure and the

features - decolourisations of the surfaces can occur during the subsequent utilization.

Please avoid direct sunlight on the monitor or high internal temperatures, which can beX

rapidly reached in parked vehicles. In such cases, remove the monitor of the hands-free

car kit from the cradle and put it in the car glove pocket or glove box for instance.

Example of installation:

123

4 5 6

8Installation of the hands-free car kit

Step 2:

Depending on the vehicle type and its equipment (e.g. airbags), it is reasonable to install the micro-

phone either at the A-pillar, at the sun shield or at the roof interior. For details about the equipment

features please refer to the vehicle documents.

Step 3:

Remove or loosen up cladding and covers to be able to install all of the cables in the vehicle as comfort-

ably as possible. Please lay the cables in a way that they do not lie/hang unsecured in the vehicle and

that they may not influence the conducting of the vehicle. When laying a cable, please take care that

it is not under traction stress but that it has some tolerance. Avoid crushing the cable as damages of

the insulation can be caused by friction/rubbing.

Step 4:

Install the electronics box at a convenient place in the vehicle. This can e.g. be behind the radio, in the

glove box, or in the centre console. Please mind that you can access the connections of the box without

difficulty. It is possible that you will have to connect the components before attaching the electronics

box, if it isn’t possible to do this afterwards due to a lack of space. A description of the connections is

provided in the next section.

Before connecting the components to the electronics box you should branch off the battery for safety

reasons. In doing so, take into account that there might be a radio coding (confer radio manual).

Important:

Please install the electronics box behind a cover or so-X

mewhere you can only reach by opening or unfastening

a protective cover / a cover. The terminal box must not hang

loosely in the vehicle.

5. Connections on the electronics box

The additional components of the hands-free car kit are connected to the electronics box. The follow-

ing connections are provided:

Connection options:

1 Power supply / Mute

2 basePlate System 9 adapted for CC 9060 Time

3 Internal loudspeaker switch box (with or without an internal switch box, depending on version)

4 External loudspeaker

5 Mikrophone

6 AUX Out

7 Monitor / Touch screen

Connection 1 - Power supply / Mute

Version 1:

Refer to the separate chapter: Installation of the audio switch box AC 5120

Note:

If the DIN ISO plug of the AC 5120 does not fit in your vehicle, numerous adapters areX

available from dealers.

Version 2 and 3:

The power supply of the hands-free car kit is established via a 4-core cable. Connect the black (clamp

31 – minus), the red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus) to the

power supply of your radio (where required via the cigarette lighter or the fuse box). After connection

to the counterpart, the yellow cable provides for radio muting during a phone conversation. Please

connect the white Molex connector with connection 1.

10 Installation of the hands-free car kit

Attention:

If you also connect the blue cable to clamp 30, the hands-X

free car kit will be permanently supplied with power. If the

vehicle is not running for a longer period, this could lead to

a discharge of the car battery.

If you deviate from the specified connection descriptionsX

it may be the case that certain functions on the HFCK (e.g.

the on-call duty) will not function correctly.

Installation instructions for the fuses

Please cut through the red, the black and the blue cable by means of a wire cutter or scissors. Now

insert the two endings of the red cable resulting from the cut into one of the binders, then close it.

If you hear two clicking noises, the clamp snapped in properly. Now insert one of the fuses and then

repeat the procedure with the other cables.

Connection 2 - for System 9 basePlate compatible with the CC 9060 Time

This is where you connect the basePlate for the System 9. This basePlate is specially adapted for the

electronics box of the HFCK. The basePlate is supplied with power via the electronics box. You can

charge your mobile phone here and also leave it here for safekeeping.

Tabla de contenidos

Otros manuales de Accesorios para automóviles de BURY

BURY

BURY VoiceTalk BT Manual de usuario

BURY

BURY UNI CarTalk Manual de usuario

BURY

BURY CC 9060 Music Manual de usuario

BURY

BURY UNIVERSAL XXL Manual de instrucciones

BURY

BURY CC 3100 Manual de instrucciones

BURY

BURY UNI Take&Talk Manual de usuario

BURY

BURY CC 9058 Manual de usuario

BURY

BURY CL 1010 Manual de servicio

BURY

BURY S8 Airfresh Manual de instrucciones

BURY

BURY Crystal Manual de usuario

BURY

BURY CC 9048 Manual de instrucciones

BURY

BURY Motion Universal Manual de usuario

BURY

BURY CC 9056 Plus Manual de usuario

BURY

BURY Bluetooth Hands-Free Car Kit CC 9060 Manual de usuario

BURY

BURY CV 9040 Plus Manual de usuario

BURY

BURY CC 3100 Manual de instrucciones

BURY

BURY CC 9010 Manual de usuario

BURY

BURY CC 9060 Instrucciones generales

BURY

BURY Take&Talk Universal Manual de usuario

BURY

BURY CC 9050 Manual de usuario

BURY

BURY RC 9060 Manual de usuario

BURY

BURY CC 9055 Manual de usuario

BURY

BURY Smart Manual de usuario

BURY

BURY UNI CarTalk Manual de instrucciones de instalación

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario