Burkert 7011 Manual de usuario

Bedienungsanleitung

Manuel d‘utilisation

Operating Instructions

Type 7011

2/2-way solenoid valve

2/2-Wege-Magnetventil

Électrovanne 2/2 voies

1 OPERATING INSTRUCTIONS

The operating instructions contain important information.

▶Carefully read these instructions and follow the safety

instructions.

▶Store the instructions in such a way that they are available to all

users.

▶Liability and warranty for the device will be invalidated if the

operating instructions are not followed.

1.1 Symbols

▶designates instructions to avoid danger.

→designates a procedure which you must carry out.

Danger

Imminent danger! Serious or fatal injuries.

Warning

Potential danger! Serious or fatal injuries.

Caution

Danger! Moderate or minor injuries.

Contents

1 Operating instructions.................................................................. 2

2 Intended use ............................................................................... 3

3 Basic safety instructions .............................................................. 4

4 Technical data ............................................................................. 5

5 Installation ................................................................................... 7

6 Disassembly .............................................................................. 11

7 Maintenance, troubleshooting ................................................... 12

8 Spare parts ............................................................................... 12

9 Transportation, storage, disposal............................................... 13

English

note

Warns of damage.

Important tips and recommendations.

Refers to information in these operating instructions or in

other documentation.

1.2 Denition of the term "device"

Term in these instructions stands for

Device the solenoid valve Type 7011

1.3 Warranty

A precondition for the warranty is that the device is used as

intended in consideration of the specied operating conditions.

2 INTENDED USE

The solenoid valve Type 7011 is designed for blocking, dosing,

lling and ventilating neutral gaseous and liquid media.

▶Use the device only as intended. Non-intended use of the

device may be dangerous to people, nearby equipment and the

environment.

▶When using the device, observe the authorised data, operating

conditions and deployment conditions specied in the contract

documents and in the operating instructions.

▶Use the device only in conjunction with third-party devices and

components recommended or approved by Bürkert.

▶The device must only be used when in perfect condition; always

ensure proper storage, transportation, installation and operation.

English

3 BASIC SAFETY INSTRUCTIONS

These safety instructions do not make allowance for any contin-

gencies and events which may arise during installation, operation

and maintenance.

The operator is responsible for observing the location-specic safety

regulations, also with reference to personnel.

Risk of injury due to high pressure in the system or device.

▶Before working on the system or device, switch o the pressure

and ventilate and empty the lines.

Risk of injury due to electric shock.

▶Before working on the device or system, switch o the power

supply and secure to prevent reactivation.

▶Observe the applicable accident prevention regulations and

safety regulations for electrical devices.

Risk of burns or re from hot device surfaces due to prolonged

operation.

▶Keep the device away from highly ammable substances and

media and do not touch with bare hands.

Risk of injury due to malfunctioning valves that operate with

alternating current (AC).

A seized core causes the solenoid to overheat, which leads to

functional failure.

▶Monitor the working process for proper function.

General hazardous situations.

Ensure the following the prevent injuries:

▶the device only when it is in perfect condition and in

accordance with the operating instructions.

▶Do not make any internal or external changes to the device and

do not subject it to mechanical stress.

▶Secure device or system to prevent unintentional activation.

▶Make sure only trained technicians carry out installation and

maintenance work.

▶Install the valves according to the regulations applicable in the

respective country.

▶After an interruption in the power supply, ensure that the process

is restarted in a controlled manner.

▶Observe the general rules of technology.

English

4 TECHNICAL DATA

4.1 Conformity

The solenoid valve Type 7011 conforms to EC directives as per the

EC Declaration of Conformity (if applicable).

4.2 Standards

The applied standards, which are used to demonstrate conformity

with the directives, are listed in the ECtype examination certicate

and/or the ECDeclaration of Conformity (if applicable).

4.3 Operating conditions

Warning

Risk of injury due to malfunction if used outdoors.

▶Do not use the device outdoors and keep it away from heat

sources that could cause the permissible temperature range to

be exceeded.

Ambient temperature max. +55°C

max. +75°C

Medium temperature max. +100°C

Media neutral gaseous and liquid media that do not

attack the housing and seal materials (see

resistance table: www.country.burkert.com).

Viscosity max. 21mm²/s

Degree of protection IP65 as per EN60529 with cable plug

4.4 Mechanical data

Dimensions see data sheet

Body material brass, polyamide (PA),

stainless steel 1.4305

Seal material FKM

4.5 Fluidic data

Circuit function

(NC) NC

2/2-way valve, direct-acting,

closed in rest position

Pressure range see type label

Port connections M5, G1/8, ange

English

4.6 Electrical data

Solenoid

dimensions Solenoid 20mm

(SG2) Solenoid 24.5mm

(SG3)

Ports DINEN175301-803, design formC:

for cable plug 2516

Industry standard, design formB:

for cable plug 2507

Flat-pin terminal as protection classIII

Stranded port on request

Operating voltage 24VDC

24VAC 50Hz, 60Hz, 50–60z

230VAC 50Hz

120VAC 60Hz

(more on request)

Voltage tolerance ±10%

Nominal power 2W to 6.5W 2W to 7W

Nominal operating

mode Continuous operation: 100% duty cycle

Optional: 50% duty cycle– duration 20

minutes

4.7 Device identication

4.7.1 Type label

Identication number

Voltage, frequency, output

max. ambient temperature, max. duty cycle

Port connection, pressure range

Type

Circuit function

Seal material

Body material

7011 A 1,5 FKM MS

Made in Germany

00222407

W12ML

24V DC 6,5 W

Tamb 55°C 100%ED

G1/8 PN0 - 12 bar

00987654

coil

S/N 001000 AC08-22AA

Fig. 1: Description of the type label (example)

English

4.7.2 Laser engraving of solenoid AC08

00987654

coil

S/N 001000 AC08-22AA

Approval as per

US and Canadian terms

CE mark

Fig. 2: Description of laser engraving on solenoid AC08

4.8 Approvals

Solenoid AC08 is cURus-approved and certied in accordance with

US and Canadian terms.

Identication of the solenoid is not necessarily linked with the

approval of the valve.

5 INSTALLATION

Danger

Risk of injury due to high pressure in the system or device.

▶Before working on the system or device, switch o the pressure

and ventilate and empty the lines.

Risk of injury due to electric shock.

▶Before working on the system or device, switch o the power

supply and secure to prevent reactivation.

▶Observe the applicable accident prevention regulations and

safety regulations for electrical devices.

▶Only connect protection classIII devices (without protective con-

ductor) to SELV or PELV power sources.

▶Only use cable plug for matching solenoid variant. Cable plugB

must not be used for a protection classIII device.

English

Warning

Risk of injury due to improper installation.

▶Installation may only be performed with trained technical personnel

with suitable tools.

▶Secure the system against unintentional activation.

▶Following installation, ensure a controlled restart.

5.1 Fluidic installation

Installation position: any, preferably solenoid facing upward.

→Check pipelines for soiling and clean if required.

→Install a dirt trap to protect against disruptions (mesh width:

0.2–0.4mm).

Note ow direction. Letters on the housing indicate the ow

direction: from 1(P) →2(A).

5.1.1 Devices with threaded connection

note

Caution: risk of breakage.

▶Do not use the solenoid as a lever arm.

→Seal the pipeline with PTFE tape.

→Hold the device on the housing using an open-end wrench and

screw into the pipeline.

5.1.2 Devices with ange connection

→Remove protective cover.

→Loosen nut and remove solenoid.

Warning

Risk of injury due to medium leak.

▶Ensure that the seals provided t the valve properly.

▶Ensure that the manifold is level.

▶Ensure sucient surface quality of the manifold.

→Insert the seal into the housing.

→Screw the housing onto the manifold, observing the maximum

tightening torque of 1Nm.

English

→Place the solenoid on it and fasten the nut, observing the

maximum tightening torque of 2.8Nm.

Nut

Solenoid

Fastening screw

Seal

Manifold

Fig. 3: Installing the devices with a ange connection

5.2 Electrical installation

Warning

Risk of injury due to electric shock.

▶Before working on the system or device, switch o the power

supply and secure against reactivation.

▶Observe the applicable accident prevention regulations and

safety regulations for electrical devices.

Risk of electric shock if protective conductor not connected.

▶Always connect protective conductor.

▶Check electrical continuity between solenoid and housing.

→Connect the protective conductor.

→Attach seal and check that it ts properly.

→Screw on the cable plug (see data sheet for approved types),

observing the maximum tightening torque of 0.3Nm.

→Check electrical passage.

English

Seal

Type 2507

Tightening torque

max. 0.3Nm

Fig. 4: Electrical connection

5.3 Rotating the solenoid

Warning

Risk of injury due to electric shock.

If there is no protective conductor function between the solenoid

and housing, there is a risk of electric shock.

▶Check the protective conductor function after installing the

solenoid.

Risk of injury due to overheating or re hazard.

Connecting the solenoid without rst installing the armature will

lead to overheating and will destroy the solenoid.

▶Only connect the solenoid after the armature has been installed.

The solenoid can be rotated by 4x90°. 2x180° in case of a block

installation.

→Loosen the nut.

→Rotate the solenoid.

→Screw in the nut with an open-end wrench, observing the

maximum tightening torque of 2.8Nm.

English

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Burkert

Burkert

Burkert 6524 Manual de usuario

Burkert

Burkert 2065 Manual de usuario

Burkert

Burkert 5281 EV Manual de usuario

Burkert

Burkert 0641 Manual de usuario

Burkert

Burkert 2101 Manual de usuario

Burkert

Burkert 8181 Manual de usuario

Burkert

Burkert 2012 Manual de usuario

Burkert

Burkert 2030 Manual de usuario

Burkert

Burkert 7012 Series Manual de usuario

Burkert

Burkert 2100 series Manual de usuario

Burkert

Burkert 2712 Series Manual de usuario

Burkert

Burkert 2101 Manual de usuario

Burkert

Burkert 2060 Manual de usuario

Burkert

Burkert 2006 Manual de usuario

Burkert

Burkert 6027 Manual de usuario

Burkert

Burkert 6724 Series Manual de usuario

Burkert

Burkert 8640 Manual de usuario

Burkert

Burkert 2030 Manual de usuario

Burkert

Burkert 2031 Manual de usuario

Burkert

Burkert 8695 Manual de usuario

Burkert

Burkert 2300 Series Manual de usuario

Burkert

Burkert 2031 INOX Manual de usuario

Burkert

Burkert Type 2000 Manual de usuario

Burkert

Burkert 8681 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario