Bully Dog Power Pup Manual de usuario
INSTALLATION MANUAL
Vehicle Application Part #
GM 6.6L Duramax ’01-’07 43568
1
Introduction Harness Description OutLook Installation Operating Instructions Pyrometer Probe Calibration Troubleshooting
TROUBLESHOOTING:
If you have questions during the installation of this product,
please visit www.bullydog.com/Product_Updates.php.
The latest version of these instructions can be found at the same
location. Please review the Troubleshooting section on page 9
before calling technical support to cover most common issues.
Technical support is available by calling 866-bullydog
(866-285-5936).
TABLE OF CONTENTS
TABLE OF CONTENTS
INTRODUCTION................................................................................................PG 2
BILL OF MATERIALS..........................................................................................PG 3
INSTALLATION ........................................................................................... PGS 38
Quick Overview.............................................................................................................................. Pg 3
Fuse Removal ’01-’02....................................................................................................................Pg 4
Fuse Removal ’03-’05....................................................................................................................Pg 5
Operating Instructions .......................................................................................................... Pgs 6-8
TROUBLESHOOTING/FAQ ..................................................................................PG 9
WARRANTY & DISCLAIMER .............................................................................PG 10
2
OUTLOOK INSTALLATION
Harness Description OutLook Installation Operating Instructions Pyrometer Probe Calibration Troubleshooting
BILL OF MATERIALS
1. Power Pup Downloader
2. OBDII Cable
TOOLS REQUIRED
- Fuse Puller or
Needle Nose Pliers (If applicable)
Introduction
2.
1.
INTRODUCTION
Welcome to the world of increased power and performance from the leader in performance, Bully Dog
Technologies. You have purchased Bully Dog’s Power Pup designed specically for the GM Duramax engines.
The Power Pup Downloader is a very simple tool to operate. All operations take place inside the cab with the
downloader plugged into the OBDII port.
Note: This set of instructions and the GM Duramax Power Pup Downloader included were designed excusively for
’01-’07 GM Duramax 2500 and 3500 pickup trucks. The Power Pup will also work on ’06-’07 GM Duramax 4500 and
5500 engines.
IMPORTANT: Do not use this product in conjunction with any other electronic chip, tuner or downloader that is intended
to enhance vehicle performance.
3
Introduction OutLook Installation Operating Instructions Pyrometer Probe Calibration Troubleshooting
HARNESS DESCRIPTION
Harness Description
This is a very simple product to operate; all operations take place inside the cab ofthe vehicle with the down-
loader hooked up to the OBDII port. Operating the Power Pup does not require any mechanical background.
Refer to this instruction booklet for general guidelines throughout the download process to determine the
dierent features available for your vehicle.
OBD II PORT LOCATION
IMPORTANT: before connecting the Power Pup to the OBDII port, check to make see if the fuses need to be
removed rst.
4
Introduction OutLook Installation Operating Instructions Pyrometer Probe Calibration Troubleshooting
HARNESS DESCRIPTION
Harness Description
REMOVING FUSES FOR ’01’02 GM DURAMAX VEHICLES
IMPORTANT: Skip the steps on this page if your vehicle is not an ’01-’02 GM 6.6L Duramax .
WARNING: Failure to remove the fuses while downloading the programs into the computer may result in computer
hardware failure.
This Fuse Box is located inside of the
vehicle by the steering wheel.
•’01-’02 Duramax: The diagram at right
shows the fuses that must be removed prior to
downloaderinstallation.
• SEO ING
• RD01
• RAP2
Note: Use your fuse puller included with your vehicle or a pair of needle nose pliers to pull the fuses.
‘01-’02 Interior Fuse Box
5
Introduction Harness Description Operating Instructions Pyrometer Probe Calibration Troubleshooting
OUTLOOK INSTALLATION
OutLook Installation
REMOVING FUSES FOR ’03’05 GM DURAMAX VEHICLES
IMPORTANT: Skip the steps on this page if your vehicle is not an ’03-’05 GM 6.6L Duramax .
WARNING: Failure to remove the fuses while downloading the programs into the computer may result in computer
hardware failure.
This Fuse Box is located underneath the hood on the drivers’ side of the vehicle.
•’03-’05 Duramax: Refer to the diagram below to see the fuses that must be removed prior to
downloader installation.
• TBC BATT
• TBC IGN1
• Radio
• INFO
‘03-’05 Fuse Box located underneath the hood
6
OUTLOOK INSTALLATION
Introduction Harness Description Operating Instructions Pyrometer Probe Calibration TroubleshootingOutLook Installation
OPERATING INSTRUCTIONS INITIAL DOWNLOAD
IMPORTANT: The steps on this page are performed on all vehicles.
1. Make sure that your key is in the ignition in the o position before you plug the downloader into the vehicle.The
downloader will later prompt you to turn the key to the run position.
2. Connect the cable that comes with the downloader into the top of the downloader and then into the OBDII port.
The OBDII port is the diagnostic port located underneath the steering wheel on the driver side of the vehicle.
3.The downloader will light up to display the rst
screen. Then follow the instructions given to you
on the screen of the downloader. The rest of these
instructions cover the main points of operating
the downloader, but do not cover screen to screen
guidance.
Scroll Left Scroll Right
No/Exit Scroll Down
Yes/Enter Scroll Up
7
OUTLOOK INSTALLATION
Introduction Harness Description Operating Instructions Pyrometer Probe Calibration TroubleshootingOutLook Installation
SCREEN OPTIONS
DOWNLOADER:
Select this option to download a power program, re-
move the vehicle speed limiter, and adjust tire size.
Select the downloader option from the main menu
and turn the key to the run position without starting
the vehicle. The downloader will then read and save
the vehicle’s stock information.
DTCS:
Select this option to view and erase diagnostic
trouble codes.
POWER LEVEL
Once the read is complete the downloader will dis-
play a list of power settings available. Use the up/
down arrows to move through and select a power
program.
SPEED LIMITER
The downloader gives racing enthusiasts the option
to remove the OEM speed limiter on the LB7 and LLY
models 2002 to 2005. On 2006 LLY and LBZ models this
feature is fully adjustable allowing you to set the speed
limiter to a specic speed. This allows the vehicle to
reach speeds in excess of where the OEM speed limiter
was set, usually at 96 mph. By selecting yes to remove
the speed limiter you agree that your vehicle has tires,
suspension, and any other necessary modications rated for speeds in excess of 140 mph.
IMPORTANT: This modication is intended for race purposes only, and should never be used on a public road or
highway.
8
OUTLOOK INSTALLATION
Introduction Harness Description Operating Instructions Pyrometer Probe Calibration TroubleshootingOutLook Installation
SPEEDOMETER ADJUSTMENT
On models ‘02-’05 LB7 and LLY, the downloader oers the ability to adjust the OEM speedometer to read
correct speeds with aftermarket larger tires. The downloader can make accurate adjustments for all tire sizes
ranging from 25”to 45”.
WARNING: adjusting the tire size to exceed 35” will cause the ABS light to turn on.
RETURNING TO STOCK
Plug in the downloader and select the download op-
tion from the main menu. Once in the power level
selection menu, highlight“Stock”and press“Y”. Then
follow the instruction set out on the downloader.
When nished, the downloader will have returned
the vehicle to stock power level with the speed lim-
iter in tact and the speedometer reacting to a stock
tire size.
DTC FUNCTION DIAGNOSTIC TROUBLE CODE
Once selected from the main menu, the DTC function
will display all diagnostic trouble codes on your vehi-
cle. This function allows you to read and erase trouble
codes o of the vehicle’s ECU. To erase DTCs simply
press “Y” and all DTC codes will be erased. If no DTCs
are displayed, then just unplug the downloader and
cycle the key.
RECOVERY MODE
If the download is disrupted during the download process, it is likely that the vehicle will need to be re-
covered. To recover the vehicle, turn the key to the o position and plug the Power Pup into the OBD ll port
and follow the on screen instructions. Once the vehicle is recovered, you can resume the download process
safely.
Note: Speed Limiter feature is not available on ‘01 models.
9
OUTLOOK INSTALLATION
Introduction Harness Description Operating Instructions Pyrometer Probe Calibration TroubleshootingOutLook Installation
POWER
INCREASE HORSEPOWER DESCRIPTION RECOMMENDED USE
138 hp
294 ft-lbs
458 hp
936 ft-lbs Extreme
Racing. must use pyro and boost
gauges. Modied transmission
highly recommended.
89 hp
193ft-lbs
409 hp
835 ft-lbs Performance Driving and light towing. Must use
pyro and boost gauges.
54 hp
134 ft-lbs
374 hp
776 ft-lbs
Tow/
Economy
Every day driving and towing;
under normal driving conditions
may increase fuel economy.
0320 hp
642 ft-lbs Stock Choose the stock setting to return
to stock.
POWER TABLE
Horsepower Figures on this Chart are derived from a 2006 Duramax LBZ.
You Choose Between any of the Available Power Levels by Scrolling through the Menu on
the Power Pup and then pressing ‘Y’ to Choose.
TRIPLE DOG TROUBLEShOOTING
CONDITION POSSIBLE SOURCES ACTION
Downloader says
unknown part #Installation
If the downloader says unknown part# when you try to
install, go to the downloader center on www.bullydog.
com and get the latest version. If problem continues, call
tech support.
Downloader doesn’t light up
when plugged into OBDII Installation
If the downloader doesn’t light up when plugged into the
OBDII, check the cigarette lighter fuse. More than likely
this fuse has blown.
Checksum error during initial
install Installation
Try unplugging the downloader and trying again. If pro-
blem persists, go to Bully Dog website, get latest upgrades
and try again.
For more information on up-to-date troubleshooting guide for the OutLook , go to
www.bullydog.com/Product_Updates.php
Otros manuales para Power Pup
4
Tabla de contenidos
Otros manuales de Electrónica del automóvil de Bully Dog
Bully Dog
Bully Dog Triple Dog Downloader Manual de usuario
Bully Dog
Bully Dog Power Pup Manual de usuario
Bully Dog
Bully Dog Watchdog Manual de usuario
Bully Dog
Bully Dog 50 State GT Diesel Manual de usuario
Bully Dog
Bully Dog Power Pup Manual de usuario
Bully Dog
Bully Dog 40417 Manual de usuario
Bully Dog
Bully Dog Triple Dog GT Gas Manual de usuario
Bully Dog
Bully Dog Power Pup Manual de usuario
Bully Dog
Bully Dog Power Pup Manual de usuario
