Buffalo LINKSTATION HS-DGL Manual de usuario

Package Contents:

Main unit (LinkStation) 1

LinkStation Base Plate 1

Base Rubber Feet 4

Ethernet Cable 1

Power Cord 1

LinkNavigator Installation CD 1

Quick Setup Guide (this user’s guide) 1

Warranty card 1

LinkStation’s face is protected during shipping by a plastic ﬁ lm covering. The ﬁ lm

may be removed by peeling it away from any corner of the front face.

Quick Setup Guide

LinkStation MultiMedia Home Server

HS-DGL Series

www.buffalotech.com v1.2

Step 1: Connect your Cables

Plug LinkStation’s power cord into a power outlet. Then, plug the included

Ethernet Cable into the Ethernet port on the back of LinkStation.

Connect the other end of the Ethernet Cable into a hub, switch, or router

on the network, or connect it directly to a PC. Connecting directly to a PC

is not recommended. Many features, including DHCP, will not work when

LinkStation is connected directly to a PC.

Press the power button on the front of LinkStation to turn it on.

Check the LINK/ACT light on the front of the LinkStation. If it is lit, then

LinkStation is connected properly; please turn to Page 4 to continue

setup. If it is not lit, continue to the next step.

If the LINK/ACT light is still not lit, please verify the following:

Both LinkStation and the hub, switch, or PC are powered on.

The Ethernet Cable is securely fastened to both devices.

Step 2: Check your Connection

If problems persist, contact our technical support. See Page 9 for support

contact information.

Insert the LinkNavigator CD

into the PC’s CD-ROM drive.

Depending on the PC’s

conﬁ guration, the EasySetup

program may launch. If

it does not automatically

launch, manually launch it

by pressing the ‘Start’ menu

and selecting the ‘Run...’

option. When the ‘Run’ dialog opens, type x:\easysetup.exe (where X

is the drive letter of the CD-ROM drive). Press ‘OK’ to continue.

Link Navigator is now running.

Please press the ‘Install IP Setup

Utility’ button, then press the

‘Start’ button.

The LinkStation IP Address

Conﬁ guration Utility will launch

and begin scanning for all

available LinkStation devices on

the network.

The IP Setup Utility allows you

to easily conﬁ gure LinkStation’s

network settings. The ‘Search’

button will re-scan the network

for all available LinkStations. The

drop down menu lists all available

LinkStations. If there are multiple

LinkStations on the network, then

select the proper LinkStation from

the drop down menu. Once the

proper LinkStation has been selected from the drop down menu,

press the ‘Change IP Address’ button.

Step 3: Link Navigator Software

This part of the program changes

LinkStation’s IP Address. Check the

box that states ‘Acquire IP Address

Automatically’. This will give

LinkStation an IP Address from the

network’s router/DHCP server. A static

IP Address and gateway can also be

set if preferred. The ‘Administrator

Password’ ﬁ eld sets an administrator

password for the web-based conﬁ guration. If a password is desired,

then type a password in the ﬁ eld. When ﬁ nished, press the ‘OK’

button. LinkStation will conﬁ rm and set the IP Address settings.

The login prompt will appear.

The user name is root.

There is NO password by default.

If a password was speciﬁ ed on the

previous step, then type that password

in the ‘Password’ ﬁ eld. Press the ‘OK’

button when ﬁ nished.

These are LinkStation’s main

conﬁ guration menus. Please

bookmark this page so it

can be accessed for future

conﬁ guration changes.

Refer to the User Manual for

detailed explanations of each

menu and their settings. The

User Manual is located on the

LinkNavigaor CD-ROM.

Please note that Pcast media server option can only be used in

conjunction with a Buffalo LinkTheater.

To continue setup, click on the ‘Basic’ settings button. This will allow

you to setup some important settings.

Then click on the ‘LinkStation Name Setup’ link.

Step 4: Using the Conﬁ guration Utility

The LinkStation name

will be required to access

LinkStation. A friendly, easy

name is recommended.

Enter a suitable name in the

‘LinkStation Name’ ﬁ eld.

Feel free to use your ﬁ rst or

last name, a description of

the data to be installed on

LinkStation, or simply name it LinkStation. Enter a short description of

LinkStation in the ‘LinkStation Description’ ﬁ eld. Once completed,

press the ‘Apply’ button.

By default there are two shares

on LinkStation. If you would

like to create additional shares

for speciﬁ c users or speciﬁ c

types of data, then click on the

‘Security’ tab. Then click on

the ‘Shared Folder Setup’ link.

From this conﬁ guration page

you can add new shares or edit

existing shares.Press the ‘Add

a New Folder’ button to begin creating a new shared folder.

To begin setting up a new

share, enter an appropriate

share/folder name in the

‘Shared Folder Name’

ﬁ eld. Enter a description

of the share in the ‘Shared

Folder Description’ ﬁ eld. It

is recommended to leave the

remaining settings in their

default state. Please refer

to the User Manual on the

LinkNavigator CD-ROM before

changing any of these settings. Press the ‘Apply’ button when ﬁ nished.

Please repeat this step to create additional shares.

Accessing LinkStation data is performed using the following steps:

LinkStation’s ‘Root Directory’

will appear. You will see all

of the conﬁ gured shares. All

users can read and write to all

folders. To setup security and

password protection, please

refer to the User Manual on the

LinkNavigator CD-ROM. Also,

please refer to the User Manual

to setup the print server. A

drive letter can also be mapped

for LinkStation, see the next step for more information. LinkStation can

be accessed by multiple computers simultaneously.

From the previous step’s ‘Root

Directory’ screen, use the pull

down menu and click ‘Tools’

and then select ‘Map Network

Drive’. The ‘Map Network

Drive’ program will run. Select

the drive letter you would like

LinkStation to assume from the

‘Drive:’ pull down menu. Enter

the \\LinkStation_Name\share_

name in the ‘Folder:’ ﬁ eld (where

LinkStation_Name is the ‘LinkStation Name’ and share_name is the

‘Shared Folder Name’ both set on Page 6). Once complete, check the

‘Reconnect at logon’ box and press the ‘Finish’ button.

Congratulations, LinkStation is set up! Please see the User Manual on

the LinkNavigator CD-ROM for more help and conﬁ guration options.

Press the ‘Start’ menu, select

the ‘Run...’ option. When the

‘Run’ dialog appears, please

type \\LinkStation_Name

(where LinkStation_Name is the

‘LinkStation Name’ set on Page

6). Press ‘OK’ to continue.

Step 5: Accessing LinkStation Data from a PC

Technical Speciﬁ cations

LAN Standards: IEEE 802.3u 100BASE-TX; IEEE 802.3

10BASE-T

Transmission Types: 1000Mbps/100Mbps/10Mbps;

(1000BASE-T) 8B1Q4+PAM5

(100BASE-T) 4B5B+MLT-3

(10BASE-T) Manchester Coding

Access Media: CSMA/CD

Media Interface: RJ-45

USB Standard: USB 2.0

Hi-Speed (HS)

Full-Speed (FS)

Low-Speed (LS)

USB Connector: USB A Connector (2)

Data Transmission Speed: Max: 480 Mbps (HS Mode)

Max: 12 Mbps (FS Mode)

Electric Current: 5.0V 1.5A, 12V 1.5A

Power Consumption: 17W Maximum

Dimensions: 2.4 x 6.94 x 7.4 in. (60 x 173.5 x 185 mm.)

Weight: 3.8 LB. (1.3 kg.)

Operating Temperature: 5-35 C; 20-80% non-condensing

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Buffalo Technology customers can obtain technical support using the

following information:

•

Online Help: Available from www.buffalotech.com.

•

User Manual: Available on the Software CD

enclosed with your purchase.

North America Support is available 24 hours a day, 7 days a week

Telephone: 866-752-6210 Email: [email protected]

Europe Support is available between 9am-6pm (GMT) Monday-

Thursday and 9am-4:30pm on Fridays.

Email: [email protected]

Technical Support

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de almacenamiento en red de Buffalo

Buffalo

Buffalo TeraStation WSS 5000 Manual de usuario

Buffalo

Buffalo TeraStation WSS 5000 Manual de usuario

Buffalo

Buffalo TeraStation Pro WSS Manual de usuario

Buffalo

Buffalo HD-RQSSU2/R5 Manual de usuario

Buffalo

Buffalo TeraStation WSS 5000R2 Manual de usuario

Buffalo

Buffalo LS421DE Manual de usuario

Buffalo

Buffalo TeraStation WS5200D Manual de usuario

Buffalo

Buffalo LS210D Manual de usuario

Buffalo

Buffalo TeraStation WSS HR WSH5000N2 Series Manual de usuario

Buffalo

Buffalo LinkStation HD-H series Manual de usuario

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manual de usuario

Buffalo

Buffalo TeraStation 3010 Manual de usuario

Buffalo

Buffalo LinkStation 500 Manual de usuario

Buffalo

Buffalo LS220D0802-EU Manual de usuario

Buffalo

Buffalo LS-WX1.0TL/R1 Manual de usuario

Buffalo

Buffalo TeraStation III iSCSI TS-IXL Manual de usuario

Buffalo

Buffalo TeraStation WS Guía del usuario

Buffalo

Buffalo TeraStation III TS-IXL Manual de usuario

Buffalo

Buffalo TeraStation 3020 Manual de usuario

Buffalo

Buffalo TeraStation 5200 Manual de usuario

Buffalo

Buffalo LS520D Series Manual de usuario

Buffalo

Buffalo LinkStation Live Manual de usuario

Buffalo

Buffalo TeraStation WSH5610DN2 Manual de usuario

Buffalo

Buffalo TeraStation WSS WS5020N6 Manual de usuario

Manuales populares de Servidor de almacenamiento en red de otras marcas

HP NetStorage 6000 Manual de usuario

Seagate

Seagate U10 ST320423A Manual de usuario

Synology

Synology RackStation RS816 Manual

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manual de usuario

Avid Technology

Avid Technology VideoRAID ST Guía de seguridad

Western Digital

Western Digital My Cloud Home Duo Manual de usuario

PrimeArray

PrimeArray 4xxx Manual de usuario

Planex

Planex MZK-NAS01SG Manual de usuario

Intel

Intel SS4000-E - Entry Storage System NAS Server Manual de usuario

Synology

Synology RS2212+ Manual de usuario

Allnet

Allnet ALL69000 Manual de usuario

Adaptec

Adaptec 5325301580 Manual de usuario

Motorola

Motorola EXORdisk II Manual de usuario

Sony

Sony XDAAI1PK Manual de usuario

Cisco

Cisco Linksys NAS200 Instrucciones de funcionamiento originales

Sans Digital

Sans Digital MR4UT6G Manual de usuario

AIC

AIC FB128-LX Manual de usuario

Dell

Dell PowerVault NX3500 Instrucciones de uso