Browning Command Ops Pro BTC-4P-16 Manual de usuario
PLEASE READ THIS MANUAL BEFORE USE
MODEL BTC-4P-16
I
NSTRUCTION MANUAL
Thank you for purchasing a Browning Trail
Camera. Our trail cameras are constructed
of the finest workmanship and materials
available. As hunters ourselves, we have
designed our products to help you get the
most of your time in the field. We hope
you enjoy scouting game for years to come
with your new Browning Trail Camera.
Our customer service team is here to help
you with any questions you may have
operating or setting up your new trail
camera. Our representatives are available
Monday through Friday from 9am to 5pm CST.
Toll Free Customer Service:
1.888.618.4496
Customer Service email:
QUICK START GUIDE
STEP 1
Press the battery tray
eject button to release the
battery tray. The tray will
eject about 1/2”. With a
slight pull, the tray will
completely eject. Insert
6 AA Alkaline Batteries
and an SD card into the
camera.
SD Card Battery Eject
STEP 2
Move the power
switch to the
“ON” position.
Press the MODE
button once to
enter the camera setup mode.Using the
control pad, set the time and date.
STEP 3
Press the MODE button once.Camera will
countdown a 20 second delay and then be
ready to capture images.
Set Date
01/06/18
TABLE OF CONTENTS
Package Contents 1
Batteries and SD cards 1
Camera Diagram 2
Battery Installation 3
Main Screen 4
Time and Date 5
Capture Mode 6
Capture Delay / Picture Size 7
Multi-Shot 8
Temp Units / Info Bar / SD Management 9
Motion Test / Camera Name 10
Timelapse Settings 11
Default Settings / Delete Images 12
Software Upgrade 12
Image Retrieval 13
Timelapse Viewer Software 14
Field Installation 15
Warranty 16
Accessories 17
FCC 18
Camera Specifications / SD card size chart 19
1
Getting Started
Package contents:
1- Trail Camera
1- 6’ Tree Strap
1- Instruction Manual
SD Card Selection
Install a good quality SD card.
The best brands of SD cards are
Browning branded cards, Sandisk
or Kingston branded cards. Please
see page 19 for a graph showing
how many photos, videos and
timelapse segments can be stored
on SD cards from 4-32GB. Based
on your intended camera usage,
this table will help you determine
what size SD card you need to use
in your camera.
2
SD Card Slot
Camera Lens IR LED
PIR
Sensor
Light
Sensor
Aim
LED
Program
Buttons
Mode
Button
Power
Switch
Battery
Eject Button
12 volt Ext
Power Port
Mic
LCD
Screen
Camera Diagram
3
Battery
Eject Button
Battery Installation
Release the battery tray by pressing the
Battery Eject button. The battery tray will
eject about 1/2”. To completely remove
the battery tray, simply pull the tray with
a bit of force.
Install 6 AA Alkalineor Lithium batteries in
the battery tray. Make sure you install the
batteries with the
correct polarity,
following the
markings on the
battery tray. For
opimtimal
performance we
recommend using
Browning
branded
batteries,
Energizer
or Duracell.
Slide the battery
tray into the
closed position.
4
Home Screen
Turn the camera’s power on by sliding
the power switch to the ON position.
The home screen displays the camera
operation mode, pictures or videos
taken, pictures or videos possible on
the SD card, camera delay countdown
and battery life meter. With home
screen displayed, the camera is armed
and ready to start taking pictures.
The possible camera modes displayed are
Trail, Video,and Timelapse Plus (TL+).
The battery life meter shows the charge
left in your batteries.
The battery indicator changes to EXT
when an external battery is plugged into
the external power port.
Trail DLY09
0000/2300
5
To Set the time and date:
From the HOME screen, press the MODE
button once. This will take you to the
SET DATE screen.
Press the OK button once. The month
selection will highlight. Use the UP and
DOWN buttons to set the correct month.
When finished setting the month, press the
RIGHT ARROW key to advance to set the
correct day. Use the UP and DOWN buttons
to change selections. Press the RIGHT
ARROW to set the correct year using the UP
and DOWN arrow keys. Press the OK button
to save your settings.
Press the DOWN button once to set the
current time of day.
Use the UP and DOWN arrow to adjust the
correct hour. Continue to set the correct
minute and AM/PM selection. Once finished,
press the OK key save your settings.
Press the DOWN ARROW key to set the
CAPTURE MODE.
Set Date
01/08/18
Set Date and Time
6
Using the RIGHT ARROW key, select the
operation mode for your camera.
CAPTURE MODE OPTIONS:
- TRAIL CAM This setting will take still
pictures of game during the day and night,
when motion is detected. This is the most
popular setting for trail camera use.
- TIMELAPSE+ This setting allows you to
take timelapse images during the day. In
addition, your camera will also take motion
activated pictures as well during the day
and night to make sure you do not miss
any game activity.
- VIDEO MODE This setting will take HD
video clips of game during the day and
night.
To continue and set the camera’s
CAPTURE DELAY, press the
DOWN arrow once.
Capture Mode
Tabla de contenidos
Otros manuales de Cámara de exploración de Browning
Browning
Browning Strike Force HD Pro X BTC-5HDPX Manual de usuario
Browning
Browning BTC-5HD-XV Manual de usuario
Browning
Browning Sub Micro Series Manual de usuario
Browning
Browning BTC-7FHD-P Manual de usuario
Browning
Browning BTC-3 Manual de usuario
Browning
Browning BTC-2 Manual de usuario
Browning
Browning Strike Force BTC-5HD Manual de usuario
Browning
Browning BTC-DWC-ATT Manual de usuario
Browning
Browning BTC-4 Manual de usuario
Browning
Browning BTC-3 Manual de usuario
Browning
Browning Defender Ridgeline Manual del operador
Browning
Browning Dark Ops HD ProX BTC-6HDPX Manual de usuario
Browning
Browning BTC-6HDE Manual de usuario
Browning
Browning BTC-1XR Manual de usuario
Browning
Browning Strike Force BTC-5HD Manual de usuario
Browning
Browning Range PS Series Manual de usuario
Browning
Browning BTC-1 Manual de usuario
Browning
Browning BTC-3 Manual de usuario
Browning
Browning SUB MICRO Series Manual de usuario
Browning
Browning Strike Force Sub Micro 10MP Manual de usuario
