Brother HL-6180DW Manual de usuario

ZLT

InstallationGuide

COMPATIBLE WITH

HL-6180DW

HL-5470DW

HL-5450DN

ZLT 2/4 - MANUAL EN/NL V1.6

Table of contents

Introduction..............................................................................3

Warning Terminology................................................................4

Quick Setup..............................................................................5

Installation Sequence.............................................. 5

STEP BY STEP........................................................................... 6

STEP 1 - UNPACKING................................................................ 6

STEP 2 - CHECKING.................................................................. 6

STEP 3 - INSTALLATION AND CONNECTION.............................7

ZLT2........................................................................... 7

ZLT4........................................................................... 8

STEP 4 - DRIVER INSTALLATION...............................................9

STEP 5 - UPDATE FIRMWARE....................................................12

Maintenance and Cleaning......................................................13

ZLT Self Testing........................................................................ 14

Troubleshooting........................................................................15

ZLT 2/4 - MANUAL EN/NL V1.6

Introduct on

Congratulations on purchasing the ZLT paper tray system,

specially designed in collaboration with Brother. With the ZLT

you can expand your Brother HL6180DW, HL-5470DW or HL-

5450DN with additional paper handling capabilities. Use the

ZLT2 to expand your existing configuration with two paper

trays, or the ZLT4 to expand with four paper trays. With the ZLT

extension you retain all your existing Brother printer’s

functionality.

This product (or parts thereof) is to be used for the intended

purpose only. The manufacturer cannot be held responsible for

damage caused by improper assembly or disassembly.

Hier können Sie diese Anleitung in weiteren Sprachen herunterladen:

You can download versions of this manual in other languages from:

Téléchargement de ce manuel dans d'autres langues sur :

U kunt de handleiding in verschillende talen downloaden door gebruik

te maken van de volgende link:

È possibile scaricare le versioni di questo manuale in altre lingue da:

Puede descargar esta guía en otros idiomas desde:

Pode transferir versões deste manual noutros idiomas a partir de:

http://www.key2printing.com/manuals

•For additional product safety information, please also see the Product Safety Guidesupplied your

Brother printer.

•For details on using your Brother device, please refer to the instructions supplied with the printer.

Term nology

Warning: Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

Caution: Indicates a potentially hazardous situation which, if not

avoided, may result in minor injury.

Important: Indicates a potentially hazardous situation that may

result in damage to property or a non-functioning product.

WARNING

CAUTION

IMPORTANT

User Guide

ZLT 2/4 - MANUAL EN/NL V1.6

ZLT 4

ZLT 2

Installation S qu nc

Before you begin, please ensure the following:

•Ensure that you remove all cardboard and plastic packaging before you proceed with the installation

•Place the ZLT on a flat, stable surface

Installat on Requ rements:

Printer not included - Power cord - Allen key - AC Adaptor - Holder - USB cable

Quick Setup

USB Cable

Power Cord Allen Key & Screw

(ZLT4 only)

AC Power

Brother Pr nter

Holder

ZLT 2/4 - MANUAL EN/NL V1.6

Step by Step

Warning: Trays are packed in plastic bags. Please note that these bags are not toys. Keep these bags

away from children and infants to prevent suffocation. Please dispose of these bags in a safe

manner

Remove all plastic and cardboard packaging from the ZLT and check the units.

Caution: Inside the trays is a protective piece of cardboard. Remove this cardboard before proceeding

with the with installation.

Take a moment to check if all the parts belonging to the ZLT are present. If a part is missing, contact the nearest ZLT

distributor in your country.

ZLT 2

ZLT2 - Power Adapter - Holder - USB cable

ZLT 4

ZLT4 - Power adapter –Holder - Allen screws with allen key - Stabiliser - USB cable - 2 castors with

brake (for the front of the stabiliser) 2 castors without brake (for the rear of the stabiliser)

USB Cable

AC Power

USB Cable

AC Power

Castors

Allen Key & Screws

Stal l zer

Holder

STEP 1 - UNPACKING

STAP 2 - CHECKING

ZLT 2/4 - MANUAL EN/NL V1.6

After completing steps 1 and 2, find out how to connect your ZLT below:

ZLT 2

Place the ZLT2 in the desired location.

Place the printer onto the ZLT.

Remove the screws holding the power supply holder in place and keep both the holder and

screws in a safe place. Place the power supply unit into the holder then using the screws securely

fit the power supply unit and the holder in place at the appropriate place on the rear of the unit.

Take care that the AC powercord is facing downwards.

Connect the USB cable from the printer to the USB socket on the ZLT.

Connect the power connector to the back of the ZLT.

Plug the power cord directly into the wall socket.

Note: Ensure the USB cable is fully inserted into the USB socket on the ZLT

Warning: Do not use extension cords, (multi-socket or otherwise)

Fill the trays with paper.

Switch the ZLT on.

Before switching the printer on ensure that the printers power cord is also plugged into the

wall socket.

After installation to your network, your printer is now ready for use.

Step by Step

STEP 3 - INSTALLATION AND CONNECTION

ZLT 2/4 - MANUAL EN/NL V1.6

ZLT 4

Attach the castors without brakes onto the threaded bolts on the back of the base, by pushing to

click the castors into place. The back of the base is the side with two M5 holes.

Attach the castors with brakes onto the threaded bolts on the front of the base, and push to click the

castors into place.

Turn the base over so the correct side is facing up.

Push the brakes on the front castors down to lock the stabiliser.

Take the paper trays out of the ZLT4.

Push the ZLT4 into the base and secure the ZLT4 at the back using the 2 Allen screws with

the supplied Allen key. Reinstall the paper trays into the ZLT4.

Remove the screws holding the power supply holder in place and keep both the holder and

screws in a safe place. Place the power supply unit into the holder then using the screws securely

fit the power supply unit and the holder in place at the appropriate place on the rear of the unit.

Take care that the AC powercord is facing downwards.

Place the printer onto the ZLT4.

Connect the USB cable from the printer to the USB socket on the ZLT4.

Connect the power connector to the back of the ZLT.

Plug the power cord directly into the wall socket.

Note: Ensure the USB cable is fully inserted into the USB socket on the ZLT

Warning: Do not use extension cords, (multi-socket or otherwise)

Fill the trays with paper.

Switch the ZLT on.

Before switching the printer on ensure that the printers power cord is also plugged into the

wall socket.

After installation to your network, your printer is now ready for use.

Step by Step

ZLT 2/4 - MANUAL EN/NL V1.6

Note: The following example shows installation for Windows 7.

Download the customised driver and open the folder where you have downloaded the driver. Double-click the

“Setup.exe”file, and choose your language when prompted.

The

E d User Lice se Agreeme t

dialog box appears. Read the Agreement and click

Yes

to accept the terms and

continue installation.

The

Co ectio Type

dialog box appears asking you to select a connection type for the printer. Select “Wired

Network (Ethernet)”and click

The

Select Co ectio

dialog box appears. Select “Brother Peer-to-Peer Network Printer”and click

Driver Installation

STEP 4 - DRIVER INSTALLATION

ZLT 2/4 - MANUAL EN/NL V1.6

The following dialog box appears. Read the notice and click

to continue installation.

Next the installer asks you to

Choose the Brother machi e you wa t to i stall

. Select the desired machine

from the displayed list and click

to continue. If your chosen machine is not displayed, check the machine is on,

and is connected to the network.

Some windows will open and close automatically as the installation continues. Depending on your Windows Security

settings, the following dialog box may appear asking you to confirm the device software installation. Click

I stall

continue.

Driver Installation

Otros manuales para HL-6180DW

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de impresora de Brother

Brother

Brother TN3430 Manual de usuario

Brother

Brother TN 2310 Manual de usuario

Brother

Brother DR-1090 Guía de referencia

Brother

Brother DR-420 Guía

Brother

Brother LT-24CL Manual de usuario

Brother

Brother DCP-J1700DW Manual de usuario

Brother

Brother SF-4000 Manual técnico

Brother

Brother HL-1110 Manual de usuario

Brother

Brother LASER PRINTER HL-2140 Manual de usuario

Brother

Brother LC123 Manual de usuario

Brother

Brother MFC-J2340DW Manual de usuario

Brother

Brother TN-2410 Manual de usuario

Brother

Brother BAS-300E Series Manual de usuario

Brother

Brother TN-2420 Manual de usuario

Brother

Brother PA-LP-001 Manual de usuario

Brother

Brother DR-250 Manual del propietario

Brother

Brother HL-L2310D Manual de usuario

Brother

Brother TN410 Instrucciones de instalación y mantenimiento

Brother

Brother I-Fax Manual de usuario

Brother

Brother TN-210 Series Instrucciones de instalación y mantenimiento

Brother

Brother LC980 Manual de instrucciones

Brother

Brother TN2000 Manual de usuario

Brother

Brother 884-B20 Manual de usuario

Brother

Brother TN-2210 Manual de usuario

Manuales populares de Accesorios de impresora de otras marcas

Star Micronics

Star Micronics TSP800 Series Manual de usuario

REA

REA JET HR pro 2K Manual de usuario

HP Laserjet,Color Laserjet 4si Manual de usuario

oliser

oliser MS 45 Manual de usuario

Roland

Roland DU2-64 Instrucciones y recetas

Xerox

Xerox EFI EXP6000 Manual de usuario

Canon

Canon Finisher-T1 Manual de usuario

Sharp

Sharp FO-1MK Manual de usuario

Labelmate

Labelmate PM-300 Manual de usuario

Epson

Epson T6248 Manual de funcionamiento

Epson

Epson OT-BZ20 Manual de usuario

Canon

Canon TonerRobot EP-27 Manual de usuario

Ricoh

Ricoh LCIT RT5100 Guía de inicio rápido

GBC

GBC 16 Series Manual de usuario

Canon

Canon INNER 2-WAY TRAY-E1 Manual de operación y mantenimiento

Develop

Develop SD-509 Manual de usuario

Kyocera

Kyocera KM-6230 Manual

Triumph Adler

Triumph Adler DF-710 Manual