Brother P-TOUCH PT-H110 Manual de usuario

ELECTRONIC LABELING SYSTEM

English

User’s Guide

H11

ELECTRONIC LABELING SYSTEM

GETTING STARTED

Power Supply and Tape Cassette

Open the cassette cover by pressing the above

indicated area at the top end of the label maker.

• Make sure you turn off the power when replacing

batteries or tape cassettes.

Insert a tape cassette, making sure it snaps

into place.

• Make sure the end of the tape feeds under the tape guides.

• Use Genuine Brother P-touch TZe tapes with this label maker.

Print head

Tape cutter leverCassette cover

Tape exit slot

Toothed Wheel

Cutter's edge

End oftape

Tape guides

With your new Brother P-touch label maker, you can create a wide variety of custom, self-adhesive labels. This label

maker uses Brother "TZe" tapes from 0.13" (3.5mm) to 0.47" (12mm) widths. "TZe" tape cassettes are available in

many colors and sizes. Visit

www.brother.com

for a complete list of tapes that work with your machine.

Read this manual carefully before starting and keep it in a handy place for future reference.

Printed in China

LAJ575001

English

User’s Guide

H11

NOTE

When using optional AC adapter (AD-24ESA)

1. Insert the plug on the adapter cord into the AC adapter jack on the bottom end of the label maker.

2. Insert the plug into the nearest standard electrical outlet.

For memory backup, use either AAA alkaline batteries (LR03) or Ni-MH batteries (HR03) together

when using the AC adapter.

Insert six new AAA alkaline batteries (LR03) or

fully charged Ni-MH batteries (HR03), making

sure their poles point in the correct directions.

Users of alkaline batteries:

Always replace all six batteries at the same

time with brand new ones.

Users of Ni-MH batteries:

Always replace all six batteries at the same

time with fully charged ones.

1Insert the two hooks at the bottom of the

cassette cover into the slots on the label

maker.

2Securely close the cassette cover

making sure it snaps into place.

AC adapter jack

NOTE

• The LCD displays one row of 15 characters; however, the text you enter can be up to 80 characters in

length.

LCD

1. Size

2. Font

3. Cursor

4. Shift

5. Caps

6. Underline/Frame

7. Style

8. Label Length

If a specific label length has

been selected, also appears.

9. Cable

• Label length displayed on LCD may differ slightly from the actual label length when printed.

1Turn on your label maker.

Supply power using six AAA batteries or the optional AC adapter (AD-24ESA), and then press

to turn the power on.

2Set the language.

The default setting is [English].

3Set the unit of measurement.

The default setting is [inch].

NOTE

• The label maker automatically turns off if no keys are pressed within five minutes.

• To cancel any operation, press .

• After pressing , "Accepted" is displayed for approximately one second.

Initial Settings

/[Language] /[English/Español/Français/Hrvatski/Italiano/

Magyar/Melayu/Nederlands/Norsk/Polski/Português/Portug. (BR)/Română/Slovenski/Slovenský/

Suomi/Svenska/Türkçe/ýeština/Dansk/Deutsch] .

/[Unit] /[inch/mm] .

NOTE

• While selecting the settings, press the Space key to revert to the default item.

Keyboard

1. Menu key

2. Power key

Cursor key : Left (Use with Shift

key to go to top of the text.)

4. Escape key

5. OK key

6. Size key

7. Font key

8. Character key

9. Shift key

10. Caps key

11. Accent key

12. Tape cutter lever

13. Clear key

14. Print key

15. Preview key

16.

Cursor key : Right (Use with

Shift key to go to end of the text.)

17. Style key

18. Frame key

19. Cable key

20. Backspace key

21. Enter key

22. Symbol key

23. Space key

• Pressing the Preview key displays a generated image of the label, and may differ from the actual label

when printed.

GETTING STARTED (Continued)

This function allows you to set the brightness of

the LCD. You can select from five levels of

brightness.

The default setting is [0].

• To change back to default setting, press the

Space key.

• After pressing , "Accepted" is displayed for

approximately one second.

BASIC USAGE

XSwitching Upper Case/Lower Case

Press to switch between upper and lower

case text.

Upper case ( ON) Lower case ( OFF)

XCreating Two-Line Labels

Move the cursor to where you want to start the next

line and press . Use either 0.35" (9mm) or 0.47"

(12mm) wide tape for two line printing.

NOTE

• The return symbol ( ) is displayed when you

press the Enter key, indicating you have chosen to

input a second line of text.

XEntering Accented Characters

Press to add an accented character.

• See the table of accented characters included in

this insertion sheet.

• To cancel operations, press .

• The order of accented characters differs by the

selected LCD language.

Contrast

/[LCD contrast]

/[-2/-1/0/+1/+2]

Entering Text

Line 1 Label image

Line 2

- /

Caps

XChanging Label Width

XChanging Label Length

NOTE

• After the label is printed, cut along the printed

dots (:) with scissors so that the label length

matches what is displayed on the LCD.

• If a specific label length has been selected,

also appears in the LCD.

• By pressing the Space key, [Auto] is displayed.

• To change setting back to default, press the

Space key.

• After pressing , "Accepted" is displayed for

approximately one second.

XTo Clear

NOTE

•

After pressing , "Accepted" is displayed for

approximately one second.

XPreview

You can preview the text before printing.

• Pressing the Preview key displays a generated

image of the label, and may differ from the

actual label when printed.

• When the LCD cannot display all the text at

once, press /to display the hidden

text.

•Press // to leave the preview

mode.

XFeeding (Tape Feed)

• This function feeds approximately 1" (25mm) of

blank tape.

XPrinting

• If you need only one copy of the label, press

without selecting the number of copies.

• You can print up to 9 copies of each label.

• The number of copies can also be specified by

pressing a number key.

• To cut the label, push in the tape cutter lever on

the upper-right corner of the label maker after

the message "Please Cut" is displayed. "Please

Cut" is displayed on the screen for two seconds.

• To prevent damage to the tape, do not touch the

cutter lever while the message "Please Wait" is

displayed.

• To remove the backing, fold the label

lengthwise with the text facing inward, to

expose the inside edges of the backing. Peel off

the backing one piece at a time and apply.

Entering Text (continued)

/[Width]

/[Normal/x2/x1/2]

Width Normal

× 2

× 1/2

/[Label Length]

/[Auto/1.2"-12.0" (30-300 mm)]

By pressing , the letters are deleted one by

one.

• You can also delete all text and settings or

text only by pressing

/[Text&Format]/

[Text Only]

Printing Labels

/[Feed]

[Copies: ] //-

BASIC USAGE (Continued)

XUsing Print Options

[Numbering]

You can print a series of up to nine labels at a time

using auto-numbering. Using this feature you can

automatically increase a selected number by one

after each label is printed. The numbers of labels

you can print at one time are dependent upon the

initial number.

Example: To print copies of a label containing a

serial number (0123, 0124 and 0125)

• Select the highest number you wish to be

printed when setting the number.

[Mirror]

Example: Follow the instructions below after

entering "J.SMITH" if you want to

Mirror Print "J.SMITH".

• Use clear tape in [Mirror], so you can read the

labels correctly from the opposite side when

attached on glass, windows or other

transparent surfaces.

XSetting Margin ( )

[Full]/[Half]/[Narrow]

For leaving equal margins on both sides of the

text.

[Chain Print]

Use this setting when printing several labels with

minimum margins.

1. Enter text.

2. Press , then [Copies: ] appears.

3. Press /or enter number with

number keys to select the number of copies.

4. Press . Printing starts, and then the

message "Feed OK?" appears.

5. Press to enter more text.

6. Clear the text, enter the text for the next label,

and then press .

7. When the message "Feed OK?" appears after

the last label is printed, press .

8. After the tape is fed, press the cutter lever to

cut off the chain of labels.

Printing Labels (continued)

Enter numbers /Move the cursor

to the number you wish to increment

/[Print

Option] [Numbering]

Enter text/characters

[Print Option] /[Mirror]

[Mirror Print?]

/[Margin]

/[Full/Half/Narrow/Chain Print]

0.16"0.16"

ABC ABC

0.47" 0.47"

ABC

Full Half Narrow

NOTE

• When you set [Chain Print], feed the tape before

using the cutter otherwise a part of the text may

be cut off.

• When you set [Half] or [Narrow], displayed label

length is the length from the printed dots ( ) to

the end of the label. Cut along the printed dots

(:) with scissors.

• To print more than one copy of a label with

minimum margin, set the margin to [Narrow].

• Do not pull the tape since this may damage the

tape cassette.

• After pressing , "Accepted" is displayed for

approximately one second.

You can save up to 15 labels and recall them for

printing at a later date. A maximum of 80

characters can be saved per file, a maximum of

1200 characters can be saved in total memory.

You can also edit and overwrite the stored labels.

XSave

XPrint

XOpen

NOTE

• You can also enter the File menu by pressing

• If you try to store a label when there is already a

label stored to that number, a message

“Overwrite OK?” appears. Press to save

your new label. Press to cancel.

• You must type text before starting the save

function.

• After pressing , "Accepted" is displayed for

approximately one second.

Printing Labels (continued)

LCD Label image

Full

Half

Narrow

2.7"

ABC

1.6"

ABC

1.0"

ABC

Saving Label Files

Enter Text /[File]

/[Save] /

/[File]

/[Print] /

[Copies: ]

//-

/[File]

/[Open]

USING TEMPLATES

This function allows you to create two types of

cable labels.

Example: Cable Label 1

NOTE

• You cannot set label length when printing Cable

Labels.

• To clear all text and settings or text only, press

/[Text&Format]/[Text Only]

• You can set the Font, Size, Style and Frame

while entering texts.

• To exit templates and return to the text input

screen, do one of following:

a) Press .

b) Press /to select [Exit], and then press

when "Print" appears.

• To preview labels, press the Preview key when

[Print] is displayed on the LCD.

• You cannot save labels created using templates

to memory.

This function allows you to create various labels

using the built-in templates. See the Text Label

templates table included in this insertion sheet.

XExample:

[Template that includes one

repeated graphic]

NOTE

• Press the Space key to return to the initial

setting for "Label Length" mode. The initial

setting is [Auto].

• To clear the text, move the cursor to the right side

where you wish to clear, and then press .

• To clear all text, press , then “All Clear”

appears. Press to clear. Press to cancel.

• You cannot set the Font, Size, Style and Frame

while entering texts.

• If you set the longer label length than the default

([Auto]), the text label is printed repeatedly

within the set length. The text label may not be

fully printed depending on the set length.

• The available label length setting changes

depending on the number of texts you entered.

• These templates are available when using 0.47"

(12mm) wide tape cassettes.

• You cannot edit the templates.

Cable Label

Cable Label template 1 :

Cable Label template 2 :

[Select Layout] /

[Input Text] Enter

text[Print]

[Copies: ] //-

Text Label

/[Decorative]

[Select Category] /[Text]

[Select Design] /

[Input Text]

[Set Label Length]

[Auto/1.2"-

39.0" (30-999mm)]

[Print]

[Copies: ]

//-

Otros manuales para P-TOUCH PT-H110

Tabla de contenidos

Otros manuales de Etiquetadora de Brother

Brother

Brother PT 1000 - P-Touch 1000 B/W Thermal Transfer... Manual de usuario

Brother

Brother P-Touch PT-11Q Manual de usuario

Brother

Brother P-Touch QL-500 Manual de usuario

Brother

Brother P-touch 1650 Manual de usuario

Brother

Brother TD-4000 Guía de seguridad

Brother

Brother QL-1110NWB Manual de usuario

Brother

Brother QL 570 - P-Touch B/W Direct Thermal Printer Manual de usuario

Brother

Brother P-touch PT-2030 Manual de usuario

Brother

Brother PT7100 - P-Touch B/W Thermal Transfer... Manual de usuario

Brother

Brother P-Touch 1800 Manual de usuario

Brother

Brother QL 570 - P-Touch B/W Direct Thermal Printer Manual de usuario

Brother

Brother P-TOUCH P700 Manual de usuario

Brother

Brother P-touch Pro PT-H111 Manual de usuario

Brother

Brother P-touch QL-710W Manual de usuario

Brother

Brother PT-D460BT Manual de usuario

Brother

Brother PT-E100 Manual de usuario

Brother

Brother P-Touch H75 Manual de usuario

Brother

Brother P-Touch PT-P700 Manual de usuario

Brother

Brother P-Touch 540 Manual de usuario

Brother

Brother p-touch D800W Manual de usuario

Brother

Brother P-Touch PT-1180 Guía de inicio rápido

Brother

Brother P-Touch PT-1230PC Manual de usuario

Brother

Brother P-touch PT-1100 Manual de usuario

Brother

Brother P-Touch PT-M95 Manual de usuario

Manuales populares de Etiquetadora de otras marcas

newell

newell Dymo LabelManager 210D Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario

Novexx Solutions

Novexx Solutions XLP 604 Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Dymo

Dymo LabelManager 420P Manual de usuario

Epson

Epson LW-PX400 Manual de usuario