Brother P-touch PT-E110 Manual de usuario
ELECTRONIC LABELING SYSTEM
English
User’s Guide
E110
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
ELECTRONIC LABELING SYSTEM
GETTING STARTED
Installing Power Supply and Tape Cassette
With the LCD facing down, open the Cassette
Cover by pressing the grooved tab and
pushing in the direction of the arrow, as
illustrated.
When replacing batteries or tape cassettes,
make sure the power is turned off.
This P-touch labeling system requires six (6)
AAA alkaline batteries or six (6) fully-charged
Ni-MH batteries, not included.
1
Print Head
Tape Cutter LeverCassette Cover
1
2
Printed in China
D00PN3001
English
Thank you for purchasing a Brother P-touch labeling system!
Use your new Brother P-touch labeling system to create a wide variety of custom, self-adhesive labels.
This P-touch labeling system uses Brother TZe or HGe tapes. TZe and HGe tape cassettes are available in many color and sizes. For
acomplete list of tapes compatible with your P-touch labeling system
Please read this guide, and the included Product Safety Guide, before using this P-touch labeling system. After reading this guide, keep
it in a safe place.
User’s Guide
E110
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
Insert the Tape Cassette following the
drawing marked inside the case. Gently
press the Cassette into the P-touch labeling
system until it clicks into place.
• Make sure your Tape Cassette is marked or .
• Use only Brother TZe or HGe tapes with this
machine.
Close the Cassette Cover and gently press
until it clicks into place.
NOTE
If you prefer to use the optional AC Adapter
(AD24) instead of using batteries:
1. Insert the Power Adapter cord into the AC
Adapter Jack on the side of the P-touch
labeling system.
2. Insert the Power Adapter into a grounded
AC electrical outlet.
Tape Exit Slot
Toothed Wheel
Cutter Edge
End of Tape
Tape Guides
3
AC Adapter Jack
4
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
NOTE
• The LCD displays one row of 15 characters; however, the text you enter can be up to 80 characters in
length.
LCD
1. Size
2. Cursor
3. Shift
4. Caps
5. Cable Wrap
6. Cable Flag
7. Faceplate
8. Label Length
If a specific label length has
been selected, also appears.
• Label length displayed on LCD may differ slightly from the actual label length when printed.
1
2
7
6
4
3
8
5
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
NOTE
• When selecting settings or lengths, press the Space key to return to the default value.
Keyboard
1. Menu key
2. Power key
3.
Cursor key : Left (Use with Shift
key to go to top of the text.)
4. Escape key
5. OK key
6. Cable Wrap key
7. Text key
8. Character keys
9. Shift key
10. Caps key
11. Accent key
12. Tape Cutter lever
13. Clear key
14. Print key
15. Preview key
16.
Cursor key : Right (Use with
Shift key to go to end of the text.)
17. Cable Flag key
18. Faceplate key
19. Serialize key
20. Backspace key
21. Enter key
22. Symbols key
23. Space key
• Pressing the Preview key displays a generated image of the label, and may differ from the actual label
when printed.
1
2
3
4
7
5
6
9
8
10
11
21
13
12
14
16
17
18
19
22
23
15
20
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
1Turn on your P-touch labeling system.
Supply power using six AAA batteries or the optional AC Adapter (AD24), and then press to turn
on the power.
2Set the language.
The default setting is [English].
3Set the unit of measurement.
The default setting is [inch].
NOTE
• The P-touch labeling system automatically turns off if it is inactive for five minutes.
• To cancel any operation, press .
• To return to the default setting, press the Space key.
Use this function to set LCD brightness. There are five levels from [-2] (darkest) to [+2] (brightest). The
default setting is [0].
NOTE
• To return to the default setting, press the Space key.
Initial Settings
/[Language] /[English/Español/Français/Hrvatski/
Italiano/Magyar/Melayu/Nederlands/Norsk/Polski/Português/Portug. (BR)/Românã/
Slovenski/Slovenský/Suomi/Svenska/Türkçe/ýeština/Dansk/Deutsch] .
/[Unit] /[inch/mm] .
Contrast
/[LCD contrast]/[-2 / -1 / 0/ +1 / +2]
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
If the cutter blade becomes blunt after repetitive use
and the tape cannot be cut cleanly, turn the cutter
board as shown in the illustration 1.
If you still have difficulties, replace with new cutter
unit (stock no. TC-4) from an authorized Brother
reseller.
XReplacing the Cutter Unit
1. Remove the two sections of the Cutter Unit
(green) in the direction of the arrows as
illustrated below 2.
2. Install a new Cutter Unit. Push it in gently until
it snaps into place.
Supplies and Accessories
Cassettes: See the included Supplies and
Accessories Guide.
AC Adapter: AD24
Cutter Unit: TC-4 (replacement)
WARNING
Do not touch the cutter blade directly with your
fingers.
Specifications
Dimensions:
(W x D x H)
4.3" X 8.0" X 2.2"
(Approx. 109(W) X 202(D) X 55(H)mm)
Weight: Approx. 0.9 lb. (Approx. 400 g)
(without batteries and tape cassette)
Power supply: Six AAA alkaline batteries (LR03)
Six AAA Ni-MH batteries (HR03)*1
Optional AC Adapter (AD24)
Tape cassette: Brother P-touch TZe tape widths:
0.13" (3.5mm), 0.23" (6mm),
0.35" (9mm), 0.47" (12mm)
Brother HGe tape widths:
0.23" (6mm), 0.35" (9mm),
0.47" (12mm)
Cutter Board
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
BASIC USAGE
You can enter a maximum of 80 characters and
spaces for a text label.
To cancel any operation, press .
XSwitching Upper Case / Lower Case
XCreating Two-Line Tapes
Move the cursor to where you want to start the
next line and press . Use either 0.35" (9mm)
or 0.47" (12mm) tape for two-line printing.
NOTE
• The return symbol ( ) appears when you press
the Enter key .
XEntering Tabs
• The tab symbol appears when you insert a
tab in the text.
XChanging Tab Length
• To return to the default tab length, press the Space
key.
• Please note: the default length varies based on
your tape size.
XCursor Keys
To move to the end of your text:
+
To move to the beginning of your text:
+
XEntering Accented Characters
• Refer to the Accented Characters table in this
guide.
• The order of accented characters varies based
on the language you selected.
Entering Text
2
Upper case
( ON)
Lower case
( OFF)
Line 1 The image
Line 2
Caps
Caps
/ [Tab]
/ [Tab Length]
/ [Auto / 0.0"-4.0"
(0-100mm)]
- / /
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
XChanging Label Length
NOTE
• The lock symbol appears when you set a
specific tape length.
• To return to the default length (Automatic,
based on text length), press the Space key.
XClearing Text and Settings
To delete individual letters and spaces, press .
To delete all text :
To delete all text and settings:
You can save and reuse the text and settings for
up to nine different labels. Each tape holds up to
80 characters (including spaces). Assign a
number (1-9) to each saved file so you can reuse
it, and edit or overwrite stored files as needed.
XSaving a new file
NOTE
• When saving a file, if you reuse a number that is
already assigned to another file, [Overwrite
OK?] appears on the LCD. To overwrite the
previously-saved file, press . To cancel
without saving, press .
XPrinting a saved file
XOpening a saved file
/ [Label Length]
/ [Auto / 1.2"-12.0"
(30-300mm)]
/ [Text Only]
/ [Text&Format]
Saving Tapes Files
(Enter text) / [File]
/ [Save] /
/ [File]
/ [Print] /
/ [File]
/ [Open] /
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
1Press to select the settings to enter
the text.
2Press / to select the settings.
Emphasize text using underlines or a frame.
XEntering Symbols
• Refer to the Symbols table in this guide.
• To cancel operation, press .
• Select History to view up to seven recently-used
symbols.
• You can also insert Symbols by pressing the
shortcut keys, as shown below.
Text Key
/
(Select an item)
Size Large
Medium
Small
Style Normal
Bold
Outline
Shadow
Italic
I+Bold
I+Outline
I+Shadow
Vertical
V+Bold
Width Normal
× 2
× 1/2
Underline and Frame
/ [Undl/Frame]
/ (Select a frame type)
2
3
Symbols Key
(Select category)
/
(Select a symbol)
Punctuation Space
key Currency
History Greek
Brackets Electrical
Bullets Datacom
Super/
Subscript AV/Security
Mathematics Safety
Arrows
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
Otros manuales para P-touch PT-E110
2
Tabla de contenidos
Otros manuales de Etiquetadora de Brother
Brother
Brother P-Touch QL-500 Manual de usuario
Brother
Brother QL 650TD - P-Touch B/W Direct Thermal... Manual de usuario
Brother
Brother P-touch 530 Manual de usuario
Brother
Brother P-touch QL-1050N Manual de usuario
Brother
Brother QL 570 - P-Touch B/W Direct Thermal Printer Manual de usuario
Brother
Brother P-touch LW1704001 Manual de usuario
Brother
Brother QL 650TD - P-Touch B/W Direct Thermal... Manual de usuario
Brother
Brother P-touch 65 Manual de usuario
Brother
Brother QL-810W Manual de usuario
Brother
Brother QL-1060N Manual de instrucciones
Brother
Brother P-touch QL-710W Guía de seguridad
Brother
Brother P-touch PT-1880 Manual de usuario
Brother
Brother P-touch 9500PC Manual de usuario
Brother
Brother P-touch LN0617001 Manual de usuario
Brother
Brother P-touch PT-D400 P-touch PTD400AD Manual de usuario
Brother
Brother P-touch E110 Manual de usuario
Brother
Brother PT-H300/H300LI Manual de usuario
Brother
Brother PT-1160 Martha By Mail Manual de usuario
Brother
Brother P-Touch PT-H100 Manual del propietario
Brother
Brother P-Touch PT-2730 Manual de usuario
