Brother P-touch MW-145BT Manual de usuario

Model Name: MW-145BT/MW-260/PJ-623/PJ-663

Created by: Brother Industries, Ltd.

P-touch Template Manual

Machine Model: MW-145BT/MW-260/PJ-623/PJ-663

IMPORTANT-PLEASEREADCAREFULLY

This documentation (“Documentation”) gives you information that will assist you in controlling

your Machine Model.

You may use the Documentation only if you first agree to the following conditions.

If you do not agree to the following conditions, you may not use the Documentation.

Condition of Use

You may use and reproduce the Documentation to the extent necessary for your own use of

your Machine Model (“Purpose”). Unless expressly permitted in the Documentation, you may

not;

(i) copy or reproduce the Documentation for any purpose other than the Purpose,

(ii) modify, translate or adapt the Documentation, and/or redistribution to any third party,

(iii) rent or lease the Documentation to any third party, or,

(iv) remove or alter any copyright notices or proprietary rights legends included within the

Documentation.

No Warranty

a. Any updates, upgrades or alteration of the Documentation or Machine Model will be

performed at the sole discretion of Brother. Brother may not respond to any request or

inquiry about the Documentation.

b. THIS DOCUMENTATION IS PROVIDED TO YOU "AS IS" WITHOUT WARRANTY OF ANY

KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. BROTHER DOES

NOT REPRESENT OR WARRANT THAT THIS DOCUMENTATION IS FREE FROM

ERRORS OR DEFECTS.

c. IN NO EVENT SHALL BROTHER BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE,

INCIDENTAL, SPECIAL, CONSEQUENTIAL DAMAGES OR ANY DAMAGES

WHATSOEVER, ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF

USE OF THE DOCUMENTATION OR ANY SOFTWARE PROGRAM OR APPLICATION

YOU DEVELOPED IN ACCORDANCE WITH THE DOCUMENTATION.

Contents

Introduction 4

What is P-touch Template? 4

How to use P-touch Template 5

P-touch Template Settings Tool User’s Guide 6

P-touch Template Limitations 11

Precautions 19

Appendix: Specifications 22

Introduction

This material provides the necessary information for directly controlling the transferred

templates in MW-145BT/MW-260/PJ-623/PJ-663.

This information is provided assuming that the user has full understanding of the operating

system being used and basic mastery of programming in a developer's environment.

We accept no responsibility for any problems caused by programs that you develop using

the information provided in this material, affecting software, data or hardware, including the

MW-145BT/MW-260/PJ-623/PJ-663, and any problems resulting directly or indirectly from

them. Use this material only if you accept these terms.

This material shall not be reproduced, in part or in full, without prior approval. In addition,

this material shall not be used as evidence in a lawsuit or dispute in a way that is

unfavorable towards our company.

What is P-touch Template?

P-touch Template is the tool to transfer the ASCII

text & binary data from a terminal unit to

transferred template in the printer. Such

transferred data is inserted into text object or

barcode object in a template.

It helps the user develop the printing system which connects directly from the terminal

unit. The types of terminal unit are as below.

Smartphone

Handy terminal etc.

Notes:

*P-touch Template is not compatible with some terminal units.

*Terminal unit should have an interface to transfer the data.

rans

er t

ata

(Text) from the terminal

unit, and print template.

ett

ng up t

e pr

nter

through your PC,

in accordance with the

terminal unit.

2. Design the template

by P-touch Editor, and

transfer it to printer.

How to use P-touch Template

1. Printer setting

Set up the initial printer setting by P-touch Template settings

tool, in accordance with the environment of host system

or the terminal unit, which MW-145BT/MW-260/PJ-623/PJ-663

connect to.

(Please refer to HP-touch Template Settings Tool User’s Guide in page 6.)

The printer driver must first be installed via a USB connection.

2. Design the template

Design the transferred template by P-touch Editor

(Please refer to P-touch Template Limitations in page 11.)

3. Transfer the templates

Transfer the templates to the printer by

P-touch transfer manager.

(Please refer to MW-Series/PockeJet Software User’s Guide.)

4. Program by P-touch template commands

If any special commands are required to control

the printer, change the terminal program in accordance

with the P-touch Template Command Reference.

(Please refer to P-touch Template Command Reference.)

5. Connect the printer with the terminal unit and print

slips etc.

Transfer the data such as ASCII text from the terminal unit

to templates in the printer, and print the slips etc.

*Printer image in the screen

may differ depending on

your product model.

P-touch Template Settings Tool User’s Guide

(5) Print start command text string setting

(1) Command mode setting

(2) Template number setting

(3) Delimiter setting

(4) Print start trigger setting

(6) Print start data amount setting

(7) Character code set setting

(8) International character setting

(9) Prefix character setting

(10) Non-printed character setting

Applies settings for (1) through (12) to the printer.

Returns (1) through (12) to their default settings.

Closes the tool.

(11) Line return character setting

(12) Number of copies setting

*Printer image in the screen may differ depending on your product model.

(1) Command mode setting

· P-touch Template mode

To use P-touch Template, select the P-touch Template mode.

· ESC/P mode

· Raster mode

(2) Template number setting

Specify the template number selected as the default when the printer is turned on.

However if any number of template not be transferred to the printer, then it cannot be

specified such number of template.

(3) Delimiter setting

A delimiter is the symbol used to indicate when to move to the next object in the data

that is being sent. Between1 to 20 characters can be specified.

(4) Print start trigger setting

Select one of the following three options for the print start trigger.

· Command Character

(Printing starts when the command character specified in (5) is received.)

· Data Insertion into All the Objects

(Printing starts when the delimiter for the last object is received.)

· Received Data Size

(Printing starts when the number of characters specified in (6) is received. However,

delimiters are not counted in the number of characters.)

(5) Print start command text string setting

Specify 1 to 20 characters.

(6) Print start data amount setting

The amount of data that must be received before printing can begin can be set between

1 and 999.

(7) Character code set setting

Select one of the following three character codes. For character code tables, refer to the

character code tables in the P-touch Template Command.

· Windows1252

· Windows1250

· Brother standard

(8) International character setting

Select one of the following as the character set of the country.

· USA

· France

· Germany

· Britain

· Denmark

· Sweden

· Italy

· Spain

· Japan

· Norway

· Denmark II

· Spain II

· Latin America

· Korea

· Legal

The following 12 codes are switched depending on the country selected from those

mentioned above.

23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh

For the characters that are switched, refer to the international character set table in the

P-touch Template Command.

(9) Prefix character setting

Change the prefix character code. Specify as a one-character character code.

The prefix character is the code for the first character that identifies commands that can

be used in P-touch Template mode.

(10) Non-printed character setting

The characters specified here are not printed when data is received. Specify 1 to 20

characters.

(11) Line return character setting

The line return code is used when feeding data to indicate that the following data should

be moved to the next line in a text object. One of the following four line return codes can

be selected, or 1 to 20 characters can be specified as the line return code.

1. ^CR

2. \0D\0A

3. \0A

4. \0D

(12) Number of copies setting

Specify the number of copies. A number between 1 and 99 can be specified.

Others

· ini file

After the [Set] button (in the main dialog box or the Communications Settings dialog box) is

clicked, the settings are saved when the dialog box is closed.

(MW-145BT)

C:\Documents and Settings\(user_account_name)\Application Data\Brother

\Printer Settings\Pts3532.ini

(MW-260)

C:\Documents and Settings\(user_account_name)\Application Data\Brother

\Printer Settings\Pts3432.ini

(PJ-623)

C:\Documents and Settings\(user_account_name)\Application Data\Brother

\Printer Settings\pts3236.ini

(PJ-663)

C:\Documents and Settings\(user_account_name)\Application Data\Brother

\Printer Settings\pts3436.ini

·Typing text into text boxes (3), (5), (9) and (10)

Characters that can be entered as text can be typed in, and control codes can be entered

as ASCII codes (00 to FF) with \ in front of them.

Example: PRINT: [PRINT]

TAB control code: [\09]

Return control code: [\0D]

\: [\\]

Otros manuales para P-touch MW-145BT

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Etiquetadora de Brother

Brother

Brother PT-8 Manual de usuario

Brother

Brother PT-1830C - Labeling System With full-length TZ Laminated... Instrucciones de montaje

Brother

Brother P-Touch PT-E800W Manual de usuario

Brother

Brother P-touch PT-D800W Manual de usuario

Brother

Brother P-touch GL100 Manual de usuario

Brother

Brother p950nw Manual de usuario

Brother

Brother P-Touch M95 Manual de usuario

Brother

Brother QL-1100 Manual de usuario

Brother

Brother QL-1050 Manual de usuario

Brother

Brother PT 1950 - P-Touch 1950 B/W Thermal Transfer... Manual de usuario

Brother

Brother P-touch PT-9700PC Manual de usuario

Brother

Brother P-touch BB4 Manual de usuario

Brother

Brother P-touch PT-D800W Manual de funcionamiento

Brother

Brother P-touch 2470 Manual de usuario

Brother

Brother P-Touch PT-1230PC Manual de usuario

Brother

Brother QL-570N Manual de instrucciones

Brother

Brother P-touch QL-710W Manual de usuario

Brother

Brother P-TOUCH QL-560 Manual de instrucciones

Brother

Brother PT 1000 - P-Touch 1000 B/W Thermal Transfer... Manual de usuario

Brother

Brother QL 650TD - P-Touch B/W Direct Thermal... Manual de instrucciones

Brother

Brother QL-1050 Manual de usuario

Brother

Brother P-Touch PT-2730 Manual de usuario

Brother

Brother P-Touch PT-2430PC Manual de usuario

Brother

Brother P-touch PT-2030 Manual de usuario

Manuales populares de Etiquetadora de otras marcas

newell

newell Dymo LabelManager 210D Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario

Novexx Solutions

Novexx Solutions XLP 604 Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Dymo

Dymo LabelManager 420P Manual de usuario

Epson

Epson LW-PX400 Manual de usuario